Pages: [1]   Go Down

AuthorTopic: tool trunk  (Read 818 times)

0 Members and 1 Guest are viewing this topic.

Offline Matt_H

  • Posts: 948
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
tool trunk
« on: July 16, 2005, 18:49:11 »
just got me a ground anchor from billing one of those metal tube things with 8 big pins that go through at angles... anyway it's probably a bit dangerous having it knocking around in the back so thought about seeing if I can find a tool trunk then I can get all the other kit in there..

I'm after smoething 42" wide to fit between the wheel arches and around 12" x 12" for the other two dimension (those aren't so critical though)

Any idea where I can get one on-line?

Matthew
Logged

Offline hobbit

  • Posts: 4750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
tool trunk
« Reply #1 on: July 16, 2005, 19:21:49 »
funnily enough a anchor have various size boxes, after people are back from billing i'm sure you will find others that have done various things

I know the anchor you have, got the same myself, but I'm able to store it under the rear seat, but if you dont carry anybody in the back of the motor you could leave it on the floor there, or load it up when you are going out laning/playing where it may be needed
Logged
Kev

'91 stretch Discovery 200 Tdi
Hybrid for running round (got to go now)
Srs 3 Lightweight petrol (got to go)
Srs 3 Lightweight petrol, runabout

Not every problem can be solved with duct tape, and it's exactly for those situations we have WD 40

Offline Matt_H

  • Posts: 948
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
tool trunk
« Reply #2 on: July 16, 2005, 19:25:56 »
being thick...but how do you store it under the rear seat in a disco?  I'm thinking of making a box out of either metal or wood, but if something can be had for a few quid I'd rather save the time to do other things ;-)

I want everything bolted down to a certain extent, I'll regret it when I have to do an emergency stop one day otherwise :(

Matthew
Logged

Offline hobbit

  • Posts: 4750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
tool trunk
« Reply #3 on: July 16, 2005, 20:48:12 »
Easy cut the disco in half and fit a 16" extension in :wink:

Odball disco, comes in handy for storage :wink:

http://members.mud-club.com/profiles/hobbit/gallery/cluttereddisco

There are a couple of sites that specialise in storage boxes, one was mentioned the other week on mud club, some interesting pics on the site might give you some ideas.
Logged
Kev

'91 stretch Discovery 200 Tdi
Hybrid for running round (got to go now)
Srs 3 Lightweight petrol (got to go)
Srs 3 Lightweight petrol, runabout

Not every problem can be solved with duct tape, and it's exactly for those situations we have WD 40

Offline hobbit

  • Posts: 4750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
tool trunk
« Reply #4 on: July 16, 2005, 20:50:53 »
Logged
Kev

'91 stretch Discovery 200 Tdi
Hybrid for running round (got to go now)
Srs 3 Lightweight petrol (got to go)
Srs 3 Lightweight petrol, runabout

Not every problem can be solved with duct tape, and it's exactly for those situations we have WD 40

Offline Niel

  • Posts: 299
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: tool trunk
« Reply #5 on: July 16, 2005, 22:15:34 »
Quote from: "Matt_H"
just got me a ground anchor from billing one of those metal tube things with 8 big pins that go through at angles...
I'm after smoething 42" wide to fit between the wheel arches and around 12" x 12" for the other two dimension (those aren't so critical though)
Any idea where I can get one on-line?
Matthew


Dunno about online, but in the gun mags such things are quite common, a nice 4 gun cab should do the job?

Niel.
Logged

Offline Matt_H

  • Posts: 948
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
tool trunk
« Reply #6 on: July 16, 2005, 22:56:20 »
Cheers Niel - I'll check out gun cabs :-)
Logged
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal