AuthorTopic: Springs  (Read 1216 times)

0 Members and 1 Guest are viewing this topic.

Offline paul_humphreys

  • Posts: 2181
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Springs
« on: September 09, 2005, 14:54:48 »
I have just gotten a set of new springs for my range rover from eb*y (yellow ones). I know the longer ones go on the back, but as there is no part numbers on them, are each pair handed? If so how do i tell whitch one gos on what side?

Paul
LC 80 series 1993. 285/75/16s Cooper STTs, OME 850s on the front with 25mm packer, 868s on the rear. 4.88 diffs. Winch bumper with 12000lb winch. Factory lockers. HD rear bumper with wheel carrier and winch mount.

http://www.crag-uk.org


Offline barmiebrumie

  • Posts: 1745
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Birmingham, M6 J7
  • Referrals: 0
Springs
« Reply #1 on: September 09, 2005, 14:57:09 »
Hi, longer on the back & if the pairs are slightly different the higher ones would go on the drivers side ( to allow for fatty's like me),

thanks john.
John.

Offline paul_humphreys

  • Posts: 2181
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Springs
« Reply #2 on: September 09, 2005, 15:11:49 »
Quote from: "barmiebrumie"
Hi, longer on the back & if the pairs are slightly different the higher ones would go on the drivers side ( to allow for fatty's like me),

thanks john.


Thanks John, thts they I was going to do it. But ther are the same hight. I do recall someone saying to weigh them and the lightest gos on the passanger side?
LC 80 series 1993. 285/75/16s Cooper STTs, OME 850s on the front with 25mm packer, 868s on the rear. 4.88 diffs. Winch bumper with 12000lb winch. Factory lockers. HD rear bumper with wheel carrier and winch mount.

http://www.crag-uk.org


Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Springs
« Reply #3 on: September 10, 2005, 15:54:03 »
They aren't handed on a RRC, unlike the Disco the Rangie was designed properly and is balance side to side.  Only the LHD diesel had handed rear springs on it.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline paul_humphreys

  • Posts: 2181
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Springs
« Reply #4 on: September 10, 2005, 16:08:02 »
Thanks again.
LC 80 series 1993. 285/75/16s Cooper STTs, OME 850s on the front with 25mm packer, 868s on the rear. 4.88 diffs. Winch bumper with 12000lb winch. Factory lockers. HD rear bumper with wheel carrier and winch mount.

http://www.crag-uk.org


 






SimplePortal 2.3.5 © 2008-2012, SimplePortal