AuthorTopic: waffle boards  (Read 1533 times)

0 Members and 1 Guest are viewing this topic.

colintandy

  • Guest
waffle boards
« on: October 12, 2005, 18:03:31 »
does any one have any idears about holding a set of waffle boards on the rear of a disco been thinking about doin this with some sort of bracket to the spare wheel/or even between spare and bracket has any one done this or have any idears that they wouldent mind sharring after the last event the mud soon collects alot on these things and would prefer to store whilst on event on the back door makes it easier to access and quicker i fancy fabricating this myself just need some direction any help would be greatly appreciated regards colin

Offline hobbit

  • Posts: 4750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
waffle boards
« Reply #1 on: October 12, 2005, 18:14:18 »
Hook mine onto the roof rack

But I suppose if you could modify the spare wheel carrier, they could be mounted onto it.

Just thinking off the top of my head, if you could drill where the blank holes on the spare wheel are against the wheel carrier, and mount nuts onto inside of the carrier then fabricate a support plate bolting through these nuts and mount off on there

Or depending on how long they are, two mountings across the top of the door and mount them horizontally
Kev

'91 stretch Discovery 200 Tdi
Hybrid for running round (got to go now)
Srs 3 Lightweight petrol (got to go)
Srs 3 Lightweight petrol, runabout

Not every problem can be solved with duct tape, and it's exactly for those situations we have WD 40

Offline Paul

  • Administrator
  • *****
  • Posts: 4935
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • Hinckley, Leicestershire
  • Referrals: 0
waffle boards
« Reply #2 on: October 12, 2005, 18:15:20 »
Paul Wright




gords

  • Guest
waffle boards
« Reply #3 on: October 12, 2005, 18:20:13 »
Quote from: "Paul"
I strap mine to the dog guard:

http://members.mud-club.com/profiles/Paul/gallery/BAB/0/228052-1120419487.JPG/

I thought waffle boards were heavy ... doesn't that make your dog guard wave around?

Offline hobbit

  • Posts: 4750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
waffle boards
« Reply #4 on: October 12, 2005, 18:22:22 »
Bit messy if they are muddy though to put them back inside
Kev

'91 stretch Discovery 200 Tdi
Hybrid for running round (got to go now)
Srs 3 Lightweight petrol (got to go)
Srs 3 Lightweight petrol, runabout

Not every problem can be solved with duct tape, and it's exactly for those situations we have WD 40

Offline Paul

  • Administrator
  • *****
  • Posts: 4935
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • Hinckley, Leicestershire
  • Referrals: 0
waffle boards
« Reply #5 on: October 12, 2005, 18:37:54 »
Quote from: "gords"
Quote from: "Paul"
I strap mine to the dog guard:

http://members.mud-club.com/profiles/Paul/gallery/BAB/0/228052-1120419487.JPG/

I thought waffle boards were heavy ... doesn't that make your dog guard wave around?


They are sitting on three big bolts that go through the bottom of the
dog guard and then bungies hold them in place, So far so good and
no movment or horrible noises.
Paul Wright




Offline Wanderer

  • Posts: 4846
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
waffle boards
« Reply #6 on: October 12, 2005, 19:57:17 »
Haven't you got some extra mounts on the top of your dog guard to the roof area Paul?
One of your earlier Discos had them I'm sure.
Ed
1993 200tdi Snorkly

Offline Paul

  • Administrator
  • *****
  • Posts: 4935
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • Hinckley, Leicestershire
  • Referrals: 0
waffle boards
« Reply #7 on: October 12, 2005, 20:10:15 »
Youv'e got me thinking now...

I'll have a look when I fetch it back here on Saturday.
Paul Wright




Offline Wanderer

  • Posts: 4846
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
waffle boards
« Reply #8 on: October 12, 2005, 20:14:10 »
I certainly remember us discussing the merits of adding an pair or more of L shaped brackets in front of the dog guard to stop it from moving forward in a quick stop situation :)

It might have been on the one you got off Alan. I can't keep up with all the names :)
Ed
1993 200tdi Snorkly

Offline Paul

  • Administrator
  • *****
  • Posts: 4935
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • Hinckley, Leicestershire
  • Referrals: 0
waffle boards
« Reply #9 on: October 12, 2005, 20:17:39 »
Didn't have a dog guard in 'Buzz' (Alan's)

Might of been the 300dti 'Scooby' I fitted a high-lift on the dog guard in that.
Paul Wright




Offline Wanderer

  • Posts: 4846
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
waffle boards
« Reply #10 on: October 12, 2005, 20:21:12 »
That might have been why it cropped up in the discussion. You didn't want Liam getting a hi lift in the back seat with him.
Although the hi lift was mounted on the floor folks and vertical not horizontal.

To infinity and beyond..........
Ed
1993 200tdi Snorkly

Offline Budgie

  • Regional Rep
  • *
  • Posts: 2217
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • This post is best viewed on a computer.
    • Lochaber
  • Referrals: 0
waffle boards
« Reply #11 on: October 12, 2005, 21:04:35 »
You may have to shorten them a wee bit but what about fixing to the inside of the rear door, either with bolts coming through from the door frame or getting a couple of D44 holders fitted.

colintandy

  • Guest
board holders
« Reply #12 on: October 12, 2005, 21:36:05 »
im tryin to keep them on outside of vehicle for 2 reasons that is for speed of use and putting away and to keep the tonnes of mud the collect so some sort of fitting to the rear door looks a good option thanks for the imput fellas regards colin

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal