Topic: parabolic springs (Read 14357 times)

josh 109 · « **on:** October 17, 2005, 16:04:05 »

after fitting a set of parabolic springs to my 109 it now sits as if it has had a 4 inch lift is this normal ?
thanks josh

Miniman · « **Reply #1 on:** October 17, 2005, 16:52:47 »

Maybee the old spring was so used that they sat down 4 inch. Think yourself lucky some people pay alot of money for a 4inch lift. The main question is. Does it ride better ?

josh 109 · « **Reply #2 on:** October 17, 2005, 16:57:43 »

i carnt tell you wether it rides better as i havent been in it since i put them on it just looks so much bigger looks good tho especialy with the 235/85/r16 mud tyres i bought at lre 2005 :lol:

hobbit · « **Reply #3 on:** October 17, 2005, 17:53:37 »

You wait till you go round a corner or island, you'll see/feel the difference

josh 109 · « **Reply #4 on:** October 17, 2005, 18:55:12 »

carnt wait i have been told it improves them no end. :lol:

yer auld aunt nelly · « **Reply #5 on:** October 17, 2005, 19:59:03 »

Tell you bud 'like a different motor 'if you realy wont a differance try some gas shockers!

josh 109 · « **Reply #6 on:** October 17, 2005, 20:31:04 »

are they a pricey thing to buy tho ? and what sort are the best ?

p4203 · « **Reply #7 on:** October 17, 2005, 21:35:02 »

hi josh
can i ask what make you used as i am looking for a set for my 109
cheers :D

dave_2A_2.25Turbo · « **Reply #8 on:** October 17, 2005, 22:16:52 »

I went for the Chris Perfect paras and es3000s - total transformation.

I got about a 2" lift at the back, and about 4" at the front - the old front springs were so bad that the old girl was virtually sitting on the bumpstops.

josh 109 · « **Reply #9 on:** October 18, 2005, 16:59:58 »

i think i might look into getting some new shocks then :lol: :lol: :lol:

josh 109 · « **Reply #10 on:** October 18, 2005, 17:04:55 »

p4203 hi i got the parabolics from paddocks carnt remember how much they were will have to dig out a bill . hope this is of help to you :lol:

Reaper · « **Reply #11 on:** October 18, 2005, 17:06:53 »

Quote

I went for the Chris Perfect paras and es3000s - total transformation.

I got about a 2" lift at the back, and about 4" at the front - the old front springs were so bad that the old girl was virtually sitting on the bumpstops.

I got the same but used ES9000, very good and got a lift at the same time

josh 109 · « **Reply #12 on:** October 19, 2005, 16:14:22 »

i gues you would recommend them then .

Ben · « **Reply #13 on:** October 19, 2005, 17:44:50 »

Mine's on the ES4000's (I think). They seem to work well enough :)

It's also got extended shackles, so it gets a slight lift from them - it sat at about the same height as my standard height defender. That (apparently) equates to about a 2 inch lift on a standard Series 3.

Dunno what it was like before they were fitted - it's always had them!

Cheers

Ben

jimthelandyman · « **Reply #14 on:** October 19, 2005, 17:59:00 »

come on then josh show us a pic of ur 109, i want to put some parabolics on mine.

josh 109 · « **Reply #15 on:** October 19, 2005, 19:51:55 »

it wont let me post a pic anyone got any idea why ?

dave_2A_2.25Turbo · « **Reply #16 on:** October 19, 2005, 22:02:33 »

Probably too big a file. Try using the image re-sizer

Andy the Landy · « **Reply #17 on:** October 19, 2005, 22:54:59 »

Heres a pic with Rocky Mountain para's and Procomp ES9000's - dont know what its like yet though as it aint finished. A bog standard trolley jack was used to see what articulation they give - still had some travel left aswell

josh 109 · « **Reply #18 on:** October 20, 2005, 15:14:40 »

tried the resizer and it did the same it wont let me up load one

stratie · « **Reply #19 on:** October 20, 2005, 16:41:07 »

My landy before i put parabolic's on.
Was only about an inch between the wheel and the arch.

stratie · « **Reply #20 on:** October 20, 2005, 16:45:24 »

And this is after i put the paras on plus pro comp shock's, it's given me a good 5" lift between the wheel and arch :D

josh 109 · « **Reply #21 on:** October 20, 2005, 18:09:15 »

looks verry good stratie like the black wheels :lol: :lol:

Miniman · « **Reply #22 on:** October 20, 2005, 21:07:31 »

My question is why would you want to lift your landy it only makes it unstable. Is it for off road ability or just for looks. I am only asking because I have a mate who is obsested with lifting his Landy. I told him if he gets it to 45 deg now it be ok but if he lifts it then trys he will find it on its side. He just say don't be silly....
If you want the lift BUY THE TYRES that are larger and that is good advice as it gets your diffs higher off the ground and gives you more clearance for those sharp hills....

Xtremeteam · « **Reply #23 on:** October 20, 2005, 21:48:54 »

Quote from: "Miniman"

My question is why would you want to lift your landy it only makes it unstable. Is it for off road ability or just for looks. I am only asking because I have a mate who is obsested with lifting his Landy. I told him if he gets it to 45 deg now it be ok but if he lifts it then trys he will find it on its side. He just say don't be silly....
If you want the lift BUY THE TYRES that are larger and that is good advice as it gets your diffs higher off the ground and gives you more clearance for those sharp hills....

i have a mate who is exactly the same,has a decent tricked rangie but cant drive a nail into a bit would,he has 235/70/16 tyres,2 inch lift,bash plates etc & my other mate with a v8 disco on 205 diamonds outclasses it no probs,although now the disco is lifted 2 inchs he can get my 750's on no probs when i borrow the diamonds,ive lifted my 90 by about 2 1/2 inchs on rangie springs but it performs so much better offroad,the racer is lifted 3 1/2 but on soft springs so i fget the most travel out the systen for the speed events,could do with an extra 1/2 inch to give me more than 8 inchs of travel

ian_s · « **Reply #24 on:** October 22, 2005, 17:19:36 »

got bored today so i tested my parabolics
i'm a bit disappointed with the front, back the back axle moves loads!

ian_s · « **Reply #25 on:** October 22, 2005, 17:22:06 »

and one last one

jimthelandyman · « **Reply #26 on:** October 22, 2005, 21:49:12 »

those parabolics don't look to give you much articulation ian, where did you get them from?

ian_s · « **Reply #27 on:** October 23, 2005, 10:58:26 »

they are from paddocks
thats not at full stretch, it drove up onto that ramp really easy
i did try putting it on ramps at opposite corners but i couldt get more that 3/4 the up and it would stay up on them :shock:

landyman Ash · « **Reply #28 on:** October 26, 2005, 11:41:41 »

When I fitted para's to my S3 WOW!!!!!!!!!!!

What a difference!!!!!!!

I love them, very big difference and I found that with the gas shocks it was more stable, not less as the wheels could move easier

If you ahve a series and are debating fitting the, stop. Go and buy some and make sure you get the uprated shocks or its like driving a bouncy castle.

Trust me ln that last point, I know. I tried it :shock: :shock: :shock:

ian_s · « **Reply #29 on:** October 26, 2005, 12:08:21 »

yeah, mine is running on the standard dampers at the moment
lots of pitching back and forth, not really a nice ride. smooth, but too jerky.
as soon as i can afford it i'm getting some procomp es3000s

News:

AuthorTopic: parabolic springs (Read 14357 times)