I need the part number for a brass brake light switch to fit the pedal box in my servo conversion. It screws in the top. Plunger pushed into switch = lights off, plunger out lights on. Thought I'd found the right one from Bearmach (only down the road) but it works the opposite way round - so I know it's not BR 1448 (575166).
Bearmach list 2 types of plastic switch - neither of which fit. The numbers on mine are not legible. And I don't know the origin of the servo (hence posting this in both Series and Defender forums). I did have to extend the slot in the bulkhead when I fitted the pedal-box though. Master cyl is twin-circuit type.
Help! Difficult to drive when you have to touch wires together each time you brake!!
