Pages: [1]   Go Down

AuthorTopic: CB into disco 1  (Read 1831 times)

0 Members and 1 Guest are viewing this topic.

the loon

  • Guest
CB into disco 1
« on: January 21, 2006, 19:00:25 »
well have partialy fitted the CB in the map pocket above drivers side but need some advice.
Where do I need to be connecting it in to electrics  :?:
Want a feed that will be live even when ignition is off so can be used when parked up
any info greatly welcomed
Logged

Offline Paul

  • Administrator
  • *****
  • Posts: 4935
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • Hinckley, Leicestershire
  • Referrals: 0
CB into disco 1
« Reply #1 on: January 21, 2006, 19:12:25 »
I ran a new cable behind the trim upto the map pocket and picked a permanant live from the fusebox.
Logged
Paul Wright



Offline Rangie3.0LtrDan

  • Posts: 906
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
CB into disco 1
« Reply #2 on: January 21, 2006, 19:14:16 »
On me 300tdi i ran it through the hole in the bulkhead where the rest of the wires came from direct to the battery! lol, wont do it this time though!
Logged
The difference between genius and stupidity is; genius has its limits.

1982 Range Rover 3.0Ltr Turbo Diesel - Redun


Offline chris9119

  • Posts: 1400
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • The New Big Boy, Gert...
    • Lordswood, Kent
  • Referrals: 0
Re: CB into disco 1
« Reply #3 on: January 21, 2006, 19:15:43 »
Quote from: "landyloony"
well have partialy fitted the CB in the map pocket above drivers side but need some advice.
Where do I need to be connecting it in to electrics  :?:
Want a feed that will be live even when ignition is off so can be used when parked up
any info greatly welcomed



landyloony

you'll have to run a cable down to the fuse box (a pair) or directly to the battery for a suitable feed. you should fit an inline fuse (if not already part of the cb).

You cant use the interia light feed as the earth is in door switch/elsewhere.

Chris

ps: make sure the cb is very secure as going over a big bump, could cause another bigger bump....... :(bigshock):
Logged
Chris
Si hoc adfixum in obice legere potes, et liberaliter educatus et nimis propinquus ades

http://members.mud-club.com/profiles/chris9119/gallery

Mud-Clubbers do it on channel 30





Offline muddysteve

  • Posts: 931
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
CB into disco 1
« Reply #4 on: January 21, 2006, 20:07:57 »
i just scotch locked mine to the interior light feed  :shock:

worked a treat  :lol:


Steve
Logged
Steve                www.lanerovers.co.uk    www.surreyoffroaders.co.uk

Offline Richie_EB4

  • Posts: 520
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
CB into disco 1
« Reply #5 on: January 21, 2006, 20:15:25 »
Quote from: "muddysteve"
i just scotch locked mine to the interior light feed  :shock:

worked a treat  :lol:


Steve


Same here........but put a 1amp fuse inline from the light.
Logged
Where there is mud there will be someone stuck.........then the fun begins

Owner www.4x4lrs.com

Administrator  www.4x4uk.org

4x4RNE Commitee member www.4x4RNE.co.uk

Defender TD5...K88 MUD
2" lift
Mach 5 rims with 33/12.5/16's
Mile marker H12 with 9.5mm Plasma rope
Steering Guard and front and rear diff guards
Safari Snorkel and roof light bar.

the loon

  • Guest
Re: CB into disco 1
« Reply #6 on: January 21, 2006, 20:15:39 »
Quote from: "chris9119"
landyloony

you'll have to run a cable down to the fuse box (a pair) or directly to the battery for a suitable feed. you should fit an inline fuse (if not already part of the cb).

You cant use the interia light feed as the earth is in door switch/elsewhere.

Chris

ps: make sure the cb is very secure as going over a big bump, could cause another bigger bump....... :(bigshock):
Cheers chris.
Any idear where I can find a good perminant live feed in the fuse box (was thinking off back of the horn)
I've run the line down the inside of the door post trim and into the side of the fuse box through the dash

As for the scotch blocks I'm not allowed to use them as a friend who does electrics for me on anything major goes pete tong is an electrican and he thinks they are the creation of the devil  :lol:
Logged

Offline landroverkeith

  • Moderator
  • ***
  • Posts: 2400
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
  • Wilby
    • wilby, northants
  • Referrals: 0
CB into disco 1
« Reply #7 on: January 21, 2006, 20:31:51 »
:oops:  i tried the interior light fed idea but all that did was make the cb smoke  :shock:  was less than a hour old luckly it didnt do any damage... dunnno wat i did wrong but i eint doing it again
Logged
2004 D2 TD5 es Premium - R99 MUD
1965 Series 2a 88" V8 "rag top"          
2000 TD5 Es - W99 MUD
Sankey Trailer
        
 

Offline petergalileo

  • Posts: 518
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
CB into disco 1
« Reply #8 on: January 21, 2006, 21:22:41 »
Interior light feed, take your light off and look for the purple and white double wires going into the light, scotch lock on to them, theres even an earth wire there too but make sure its the earth for the switch and not the ones for the door switches otherwise your rig will only work if the doors are open ! :lol:
Logged
1996 300TDi Discovery ES - Java Black, Stainless Bullbar, Electric folding mirrors, TD5 Steering Wheel in Beige - Doesn't get muddy !

Freelander 1.8 Xi - LR Bodykit, Light Guards.

the loon

  • Guest
CB into disco 1
« Reply #9 on: January 21, 2006, 21:38:57 »
Quote from: "petergalileo"
Interior light feed, take your light off and look for the purple and white double wires going into the light, scotch lock on to them, theres even an earth wire there too but make sure its the earth for the switch and not the ones for the door switches otherwise your rig will only work if the doors are open ! :lol:


only problem is I dont have a internal switch on the light.
so should (in therory) make it easier as theres one less wire
Logged

Offline petergalileo

  • Posts: 518
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
CB into disco 1
« Reply #10 on: January 21, 2006, 21:41:35 »
You have a 200 ? theres a button next to the light which switches the light on.
Logged
1996 300TDi Discovery ES - Java Black, Stainless Bullbar, Electric folding mirrors, TD5 Steering Wheel in Beige - Doesn't get muddy !

Freelander 1.8 Xi - LR Bodykit, Light Guards.

the loon

  • Guest
CB into disco 1
« Reply #11 on: January 21, 2006, 22:41:23 »
Quote from: petergalileo
You have a 200 ? theres a button next to the light which switches the light on.


I'll have to have a look for that cheers
Logged

Offline kevhenson

  • Posts: 204
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
CB into disco 1
« Reply #12 on: January 22, 2006, 17:51:53 »
has anyone got a pic of one slotted in the map pocket? think my cb might be a bit to big to fit
Logged
98 Cherry 4l
LPG
Safari snorkel
2" lift..... just wants some 31's now

Offline Paul

  • Administrator
  • *****
  • Posts: 4935
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • Hinckley, Leicestershire
  • Referrals: 0
CB into disco 1
« Reply #13 on: January 22, 2006, 17:53:03 »
Logged
Paul Wright



the loon

  • Guest
CB into disco 1
« Reply #14 on: January 22, 2006, 18:13:33 »
Quote from: "petergalileo"
You have a 200 ? theres a button next to the light which switches the light on.


well found the button (right next to the light  ](*,) )
CB is in but have made a slight boob - it will work fine as long as you keep the doors closed  #-o  

Never mind its better than nothing so will have to have a play with connections at other date

 :D
Logged

Offline kevhenson

  • Posts: 204
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
CB into disco 1
« Reply #15 on: January 22, 2006, 21:27:49 »
cheerspaul... looks a bit of a squeeze!!
Logged
98 Cherry 4l
LPG
Safari snorkel
2" lift..... just wants some 31's now
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal