Topic: Waffle boards mounted on rear door liner (Read 2550 times)

fish · « **on:** January 22, 2006, 17:05:11 »

Mounted my waffle boards on back door chequer plate liner, should keep them out of the way. Anyone else used bungee cord and steel brackets to hold them in place on rear door? I hope they wont fly off first time I go down a steep bank and snack me on the back of the head!

thumbs · « **Reply #1 on:** January 22, 2006, 17:08:54 »

i like that idea. mine are wedged up against bulkhead at the mo, may be changeing that soon :D

MuddyMachine · « **Reply #2 on:** January 22, 2006, 17:11:22 »

Looks good, putting chequer on my door next week :D

Budgie · « **Reply #3 on:** January 22, 2006, 17:58:05 »

Having a roofrack, I store them on the roof, it keeps all the mud out of the inside of the Disco. :D

Rangie3.0LtrDan · « **Reply #4 on:** January 22, 2006, 18:01:00 »

How did you fix the chequer plate to the door, was it riveted or screwed in?

thumbs · « **Reply #5 on:** January 22, 2006, 18:06:55 »

i screwed mine on

Rangie3.0LtrDan · « **Reply #6 on:** January 22, 2006, 18:09:19 »

Will look at doing that at some point then lol

fish · « **Reply #7 on:** January 22, 2006, 18:09:33 »

Screwed on using self-tapers, broke 2 x 3.5mm bits in process!!

Sharpshooter · « **Reply #8 on:** January 22, 2006, 18:42:48 »

On all my chequerplate i use the self tapping bolts from Screwfix. The are really strong, and you put them in with a drill, and an 8mm socket. They have a washer too.

Sheddy · « **Reply #9 on:** January 22, 2006, 18:53:00 »

I used rivnuts and countersunk alen bolts on my series. Should get my Disco tommorrow so I suppose I'll be starting all over again!

disco 200 · « **Reply #10 on:** January 22, 2006, 18:58:01 »

like the chequer plate. Do you cut it yourself from the pattern of the door card or is someone selling them already done?

Xtremeteam · « **Reply #11 on:** January 22, 2006, 19:02:26 »

Quote from: "sharpshooter"

On all my chequerplate i use the self tapping bolts from Screwfix. The are really strong, and you put them in with a drill, and an 8mm socket. They have a washer too.

Tech screws

3rd in line for fixing landrovers behind tank tape n cable ties

fish · « **Reply #12 on:** January 22, 2006, 19:05:24 »

Bought it already cut of eblag for Ã‚Â£30. Would have cut it myself, but could not find a cheap supply of chequer plate anywhere. If anyone knows where it can be bought from at sensible prices let me know.

Sharpshooter · « **Reply #13 on:** January 22, 2006, 19:07:05 »

Quote from: "fish"

Bought it already cut of eblag for Ã‚Â£30. Would have cut it myself, but could not find a cheap supply of chequer plate anywhere. If anyone knows where it can be bought from at sensible prices let me know.

Seems that it is just as cheap to but it ready cut. That way they only charge you for waht you use. I have enquired several times from suppliers (even through work), and its still expensive.

thumbs · « **Reply #14 on:** January 22, 2006, 19:41:14 »

rebel sell the door cards pre cut in chequer plate,

got tons of them "tech screws" , brilliant bits of kit, but didnt want the big heads sticking out for this perticular job so used round head speed screws (self tappers)

beast5680 · « **Reply #15 on:** January 22, 2006, 21:04:07 »

I got an 8x4 sheet of 5 bar chequer plate 2mm from parkers in canterbury for Ã‚Â£35 and cut out a rear door card and made some plates up for below the trim line along the sides and i,ve still got some left over :D

wibble · « **Reply #16 on:** January 22, 2006, 21:13:24 »

ooo that door liners looks the biz. better than the scratched mess that my two dogs have left...

Sharpshooter · « **Reply #17 on:** January 22, 2006, 21:20:14 »

Quote from: "beast5680"

I got an 8x4 sheet of 5 bar chequer plate 2mm from parkers in canterbury for Ã‚Â£35 and cut out a rear door card and made some plates up for below the trim line along the sides and i,ve still got some left over :D

Did you buy it through an account, or over the counter??

beast5680 · « **Reply #18 on:** January 22, 2006, 21:24:32 »

place i work at has an account with them so i ordered it thru that, come to think of it i dont hink i,ve actually been billed for it yet

colintandy · « **Reply #19 on:** January 23, 2006, 21:59:55 »

:D nice

News:

AuthorTopic: Waffle boards mounted on rear door liner (Read 2550 times)

colintandy