AuthorTopic: 265/75/16 on a 7j 16 wheel  (Read 1303 times)

0 Members and 1 Guest are viewing this topic.

Offline bambamjj

  • Posts: 362
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
265/75/16 on a 7j 16 wheel
« on: February 08, 2006, 17:42:15 »
Has anyone fitted a 265/75/16 tyre on a Freestyle alloy wheel code 7J 16

Being told it cannot be done needs to be a 8 or 8.5J

Always thought this was a popular fit?

Jon
P reg 300 tdi Discovery, very slow, sluggish and standard but i am working on it.......

SOLD - Gutted
94 V8 Discovery 200 in Black
2" pro-comp lift
Spots
Diff Guards

Offline Richie_EB4

  • Posts: 520
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
265/75/16 on a 7j 16 wheel
« Reply #1 on: February 08, 2006, 17:57:23 »
I have that size tyre on steel wheels...........if that helps ya.
Where there is mud there will be someone stuck.........then the fun begins

Owner www.4x4lrs.com

Administrator  www.4x4uk.org

4x4RNE Commitee member www.4x4RNE.co.uk

Defender TD5...K88 MUD
2" lift
Mach 5 rims with 33/12.5/16's
Mile marker H12 with 9.5mm Plasma rope
Steering Guard and front and rear diff guards
Safari Snorkel and roof light bar.

Offline fesuvious

  • Posts: 395
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • water water everywhere, oh sh*t, Iv stalled it
  • Referrals: 0
265/75/16 on a 7j 16 wheel
« Reply #2 on: February 08, 2006, 19:12:42 »
I cant see why a seven inch width should cause any problems at all.
Recommended wading depth 500 inches, no wait, im sure that was milimetres. And let me get this right. The breakover angle is 80 degrees....??

Ahh, f**k it, Il give it a go anyway

Offline davidlandy

  • Posts: 3568
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
265/75/16 on a 7j 16 wheel
« Reply #3 on: February 08, 2006, 19:27:11 »
265/75 onto a 7" rim is fine
- dont let anybody tell you otherwise

 :wink:
Dave
Sniff, sniff, this mud smells funny

Offline Jake

  • Regional Rep
  • *
  • Posts: 5474
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • <insert witty comment here>
    • South Molton, Devon. UK
  • Referrals: 0
265/75/16 on a 7j 16 wheel
« Reply #4 on: February 08, 2006, 19:38:06 »
My spare is a 265/75R16 on a 7J alloy
No problems.
 :D
Jake

Owner - Land Rover Discovery 2
Driver - Land Rover Defender 100" Trayback

Offline GaryP

  • Posts: 30
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
265/75/16 on a 7j 16 wheel
« Reply #5 on: February 12, 2006, 00:05:24 »
I've got 265/75x16 BFG's with a 2" lift. the only place they catch is the rear of the rear wheel arch. You can either move out the bracket that bolts the wing to the frame, or trim off the bottom of the wheel arch. take it back about 1.5 or 2" at the bottom, and taper the cut up to the lower swage line.
'02 Discovery ES V8
on LPG

Offline Bobtail

  • Regional Rep
  • *
  • Posts: 1215
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
265/75/16 on a 7j 16 wheel
« Reply #6 on: February 12, 2006, 01:44:27 »
I have 265x75 bfg muds on freesyle and xs deep dish (freestyles for sale, check out for sale section)

both are std landrover fitment alloys and both are 7jx16

so no probs fitting them to 7" rims

hope this helps  :D
200 TDI Range Rover Classiic


 






SimplePortal 2.3.5 © 2008-2012, SimplePortal