Pages: [1]   Go Down

AuthorTopic: Overdrive  (Read 1747 times)

0 Members and 1 Guest are viewing this topic.

Offline landykins

  • Posts: 51
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Overdrive
« on: March 04, 2006, 18:47:03 »
Hi I've got an overdrive and it wont go in :( It goes in and connects but pokes out by about 1cm. I've tried all the"procedures" in the instructions to no avail. Any thoughts?
Logged
Land rover series 3 (Old-Man-Emu shocks, overdrive, 90 wheels+Colway A/Ts, Paddocks parabolics)

1.8 petrol Freelander (standard)

Offline Dr Neil

  • Posts: 818
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Overdrive
« Reply #1 on: March 04, 2006, 19:46:55 »
just something i seemed to remember from when i fitted mineis make sure the lock tab for the centre nut is trimmed otherwise it can obstruct the gear?
Also it may not be properly engaged with the gear, they can be a right pain in the ****!
Is it a brand new one, if not just make sure there aren't any nicks or anything on the casing where it goes into the gearbox.
hope this helps and good luck mate :)  :)  :)
Logged
200tdi over 200kmiles
+2"lift.
Procomp Es9000 shocks
235 MT's on silver modulars
diff guards
tank guard
Paidia4x4 winch bumper.
Discoparts HD rear bumper.
Champion 10000N winch
CB and CDplayer
Safari snorkel
modified turbo actuator vac pipe pick up.
twin batteries with Paidia4x4 split charge system
roof lightbar

Offline cstokes

  • Posts: 167
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Overdrive
« Reply #2 on: March 06, 2006, 18:49:40 »
If you take the top plate off the top of the transfer box so that you can see the gears and then put the high low range lever into the middle (neutral position all will become nice and free, and whilst pushing on the back of the overdrive you can turn the gear through the hole in the top of the transfer case.

Hope that helps.
Logged

Offline Devon-Rover

  • Posts: 748
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Tavistock
  • Referrals: 0
Overdrive
« Reply #3 on: March 07, 2006, 00:49:09 »
Ditto neil. Sounds like the lock tab is obstruction it. Time to get the tin snips out!  :)
Logged
Rowan.

"Jemima" 2.25 Petrol SWB, ACR rear Silencer, 235/85 Macho's, MAP Capstan & HD Bumper, Tweeked suspension, CB, Light Bar.
"Baker" 2.6 Petrol LWB (former Tow Truck)
"Lizi" 4.2 V8i Discovery, Gone but not forgotten.
"Kate" 1985 Ninety 4.2 V8 Auto, Stainless exhaust, Ashcroft Tunnel, Mud console, Polmar Venus CB, HD Steering bars, Terrafirma Steering damper, D44 Winch Bumper, Superwinch EP9.5, Superwinch Wireless controls, QT Diff Guards. 'More toys to come'


Vorsprung Duch Ducktape. My website Searle Safari Info source.

Offline smog

  • Posts: 169
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Overdrive
« Reply #4 on: March 07, 2006, 02:15:49 »
Sounds silly i know and i assume you know all this but, there is a cog thing you have to change in some boxes to make it fit in with the other gears i assume you have done this.

Sad but true without pic's it makes it difficult to guess.

Either way hope you get it sorted.
Logged
On the 8th day god made Smog

Offline landykins

  • Posts: 51
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Overdrive
« Reply #5 on: March 12, 2006, 17:59:26 »
Its in now and working fine.Thanks for the help
Logged
Land rover series 3 (Old-Man-Emu shocks, overdrive, 90 wheels+Colway A/Ts, Paddocks parabolics)

1.8 petrol Freelander (standard)
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal