Topic: 90 disc brake bias valve (Read 1546 times)

Matt_H · « **on:** March 10, 2006, 20:41:35 »

Been looking at the bias valve on the 90 (which has had a disc brake conversion)... It doesn't look quite right to me (far too complicated for double discs and it's about 5 times the size of the disco one)

Can anyone post a picture of a 90 with factory fitted rear disc brakes so I can compare please?

If it's wrong would swapping the disco one over be ok?

Matthew

Porny · « **Reply #1 on:** March 23, 2006, 22:55:34 »

will do tomorrow.... is dark and cold now!!!

Ian

Matt_H · « **Reply #2 on:** March 23, 2006, 23:14:50 »

thanks matey!

Porny · « **Reply #3 on:** March 24, 2006, 17:14:39 »

Matt....

Sorry, but I can't take any pics until Monday.... my 90" is in my works carpark until then..... sorry

Ian

Porny · « **Reply #4 on:** March 27, 2006, 17:06:17 »

Not the best pictures, but then it's not the easiet thing to get too!!!!

Ian

Porny · « **Reply #5 on:** March 27, 2006, 17:10:49 »

Also....

Two systems are listed on the parts system, one with the bias valve, and one without. Both are for Disc front and rear systems.

Just depends which one Land Rover decided to fit I think.... :?

News:

AuthorTopic: 90 disc brake bias valve (Read 1546 times)

Matt_H

90 disc brake bias valve

Porny

90 disc brake bias valve

Matt_H

90 disc brake bias valve

Porny

90 disc brake bias valve

Porny

90 disc brake bias valve

Porny

90 disc brake bias valve