Topic: Discovery Bling (Read 1574 times)

petergalileo · « **on:** April 03, 2006, 17:14:58 »

I saw a Discovery 1 today and it had Lexus style rear lights, I am on a quest now to find some.

I wish I had my camera with me they really looked great.

Any ideas ?

Peter

DiscoDan · « **Reply #1 on:** April 03, 2006, 17:18:19 »

Hi.

Keep us posted, I've been wondering about different rear lights for some time now. Were they LED? Can you describe what you mean by Lexus rear lights? Circular?

Cheers, Dan

petergalileo · « **Reply #2 on:** April 03, 2006, 17:53:15 »

Looked like rounded lamps (similar to defender) encased behind a clear cover. Lights were round and had chrome surrounds. Like on those boy racer corsas.

Damonski · « **Reply #3 on:** April 03, 2006, 20:30:46 »

Hiya

They are available and I know where.................

.................... http://www.4x4bits.com :D

Look under the freelander section tho ;)

Andy. · « **Reply #4 on:** April 03, 2006, 20:35:55 »

Damian, they do front light conversions but not rear.

Be very interested myself if these units can be traced?

petergalileo · « **Reply #5 on:** April 03, 2006, 20:37:55 »

Nope, was not the bumper lights, was the main rear lights.

Looked a little like these http://cgi.ebay.co.uk/Peugeot-206-Lexus-Style-Rear-Lights_W0QQitemZ4627515132QQcategoryZ10406QQrdZ1QQcmdZViewItem

Except for the shape of course

Andy. · « **Reply #6 on:** April 03, 2006, 20:44:03 »

Any chance you'll see this driver again, follow him next time

Damonski · « **Reply #7 on:** April 03, 2006, 20:53:35 »

Speak to them, last time I asked they had pillar lights and bumper lights sorted for the Discovery.

jnoshea · « **Reply #8 on:** April 03, 2006, 21:23:10 »

Did they look a bit like these?

http://cgi.ebay.co.uk/Mitsubishi-L200-LEXUS-STYLE-Rear-Lights_W0QQitemZ4625471907QQcategoryZ10400QQrdZ1QQcmdZViewItem#ebayphotohosting

I've searched for ages on the web and can't find anyone that makes this type for a disco. I'd love to change mine though. I'd also like to change the headlamps to the 2005 style but looks like no one does a conversion like that for the discovery I.[/url]

petergalileo · « **Reply #9 on:** April 03, 2006, 21:28:19 »

No they were the correct shape. I suppose its possible they were made for the Austin Maestro and then adapted but thats just a guess.

As for the front, I have a set of TD5 headlights and indicators, going to get the hammer, chisel and angle griner out and fit them over the summer. Disco 1 headlamps are crap aint they.

Peter

jnoshea · « **Reply #10 on:** April 03, 2006, 21:37:44 »

How much modification do you think it'll take to fit the TD5 lights?

petergalileo · « **Reply #11 on:** April 03, 2006, 21:46:14 »

Well I am not talking about the 2003 on lights but to fit the older ones

You need to mount the adjusters as they are in a slightly different place, you also need to remove the small panel which sits in the way of the bulb holder on the TD5 indicator. In additiion some of the wing needs to be cut away as the TD5 indicator is rectangular and doesnt have a corner cut out like the disco one surround or the 300 indicator.

As for wiring, its the same but you need an extra 2 wires from the side light on the headlamp to the side light in the indicator.

Not a lot really.

Damonski · « **Reply #12 on:** April 03, 2006, 22:10:04 »

Or you could fit 300 series headlights or the early td5 headlights without any choppin about :)

petergalileo · « **Reply #13 on:** April 03, 2006, 22:18:31 »

Yes, you can fit 300 headlamps and indicators to a disco 1 without much difficulty. You could fit TD5 headlamps with 300 indicators to a disco 1 without too much hastle either.

Dont do what I did though and buy a pair of Discovery 3 headlamps in the hope to bodge them on the front of a Disco 1 as it is physically impossible. They are absolutely gigantic I worked out you would need to remove the entire headlamp mounting system, move both battery trays, modify the wings grill and bonnet.

Now I have said that tho, some smartass will provide a picture of "one they did earlyer" I bet !

jnoshea · « **Reply #14 on:** April 03, 2006, 23:57:23 »

Mines a 1995 300Tdi and basically I would like the headlamps to look like this...

...if you're fitting early TD5 lights and the kit this picture was taken from can convert early TD5 to 2003 spec then it should be possible?

Damonski · « **Reply #15 on:** April 04, 2006, 00:57:07 »

yeah its possible to have those td5 lights, there is a scam on ebay at the moment for an "ebook" with "detailed instructions" on how to do it. It does involve quite a few modifications with a grinder etc tho.

Having said that the ebook is a lot cheaper than a guy in Oldham way who offers it for about Ã‚Â£1500 of work and your car for about 5 days. There was a thread I started somewhere in the Discovery area about it ;)

Ill see if I can find it

Damonski · « **Reply #16 on:** April 04, 2006, 01:03:56 »

Ok this is the thread:

http://forums.mud-club.com/viewtopic.php?t=13541

This is the company that will do it for you:

http://www.gdautocosmetics.co.uk/pages/about%204x4.htm

Or hassle Fingers Mclean, he did have a .zip at one stage with his pics from his installation of 2003 lights on a 300tdi

News:

AuthorTopic: Discovery Bling (Read 1574 times)

petergalileo

Discovery Bling

DiscoDan

Discovery Bling

petergalileo

Discovery Bling

Damonski

Discovery Bling

Andy.

Discovery Bling

petergalileo

Discovery Bling

Andy.

Discovery Bling

Damonski

Discovery Bling

jnoshea

Discovery Bling

petergalileo

Discovery Bling

jnoshea

Discovery Bling

petergalileo

Discovery Bling

Damonski

Discovery Bling

petergalileo

Discovery Bling

jnoshea

Discovery Bling

Damonski

Discovery Bling

Damonski

Discovery Bling