Topic: What winch is this? (Read 4862 times)

paul_humphreys · « **on:** April 07, 2006, 20:40:31 »

I know its a Superwinch and its hydraulic. But what the pull rate and model?

unknownmanxman · « **Reply #1 on:** April 07, 2006, 20:43:50 »

Well its a superwinch... They're driven off the PTO i think, and can either be hydraulic like yours, or driven via a shaft that runs up the side of your engine. The one in the picture was fitted to series landies, but can also be fitted to 90's & 110's so i beleive... correct if wrong! I cant think of the model number right now..

Cheers

Richie_EB4 · « **Reply #2 on:** April 07, 2006, 20:50:10 »

I know the smallest they made was 9000lbs if thats any good.

paul_humphreys · « **Reply #3 on:** April 07, 2006, 21:04:03 »

It all helps thanks. Its fitted to a 110.

Paul

Richie_EB4 · « **Reply #4 on:** April 07, 2006, 21:06:00 »

Quote from: "paul_humphreys"

It all helps thanks. Its fitted to a 110.

Paul

Whats the cable size ??

paul_humphreys · « **Reply #5 on:** April 07, 2006, 21:12:25 »

To be honest I dont know, its in having the cam belt done right now. I can get the size tomorrow.

Paul

hobbit · « **Reply #6 on:** April 07, 2006, 21:13:45 »

The hydraulics winches in general are normally very strong and reliable units

Richie_EB4 · « **Reply #7 on:** April 07, 2006, 21:16:02 »

Chances are if its 3/8th's (9.5mm) then i would say its the 9000lbs........but if its the 7/16th's (11mm) then it could be the 14,000lbs.........providing the cable hasnt been changed in the past.

freeagent · « **Reply #8 on:** April 07, 2006, 22:07:36 »

that is a superwinch 525, almost certainly PTO powered from the transfer box, if not its hydraulic. mega-rated pull dependant on how overload is set... if you ring superwinch they'll send you a manual FOC.

Manicminer · « **Reply #9 on:** April 07, 2006, 22:13:30 »

http://www.innovation-engineering.co.uk/winches.htm

http://www.britgroup.ro/html/accessories/h8pn.htm

http://www.winchwarehouse.co.uk/winches/commercial.html

gtomo2 · « **Reply #10 on:** April 07, 2006, 22:16:22 »

looks like the ones fitted to a army command 110 if so dont know what model it is but i do know it will pull out a loaded army truck (about 7 ton) boged down to its axles as i did it once had to tie the l/r to a couple of trees to stop it moving. :shock:

paul_humphreys · « **Reply #11 on:** April 07, 2006, 22:17:12 »

Quote from: "freeagent"

that is a superwinch 525, almost certainly PTO powered from the transfer box, if not its hydraulic. mega-rated pull dependant on how overload is set... if you ring superwinch they'll send you a manual FOC.

Thanks for that I will try them Monday.

Paul

paul_humphreys · « **Reply #12 on:** April 07, 2006, 22:18:13 »

Quote from: "M Thomas"

http://www.innovation-engineering.co.uk/winches.htm

http://www.britgroup.ro/html/accessories/h8pn.htm

http://www.winchwarehouse.co.uk/winches/commercial.html

Thanks I will take a look.

Paul

paul_humphreys · « **Reply #13 on:** April 07, 2006, 22:19:12 »

Quote from: "gtomo2"

looks like the ones fitted to a army command 110 if so dont know what model it is but i do know it will pull out a loaded army truck (about 7 ton) boged down to its axles as i did it once had to tie the l/r to a couple of trees to stop it moving. :shock:

As long as It will pull my 110 out when I get it stuck! :lol:

Paul

paul_humphreys · « **Reply #14 on:** April 07, 2006, 23:20:25 »

I have been told it looks like a Superwinch 525 but I carnt find anything out about it.

Paul

Xtremeteam · « **Reply #15 on:** April 08, 2006, 13:32:38 »

my mate has 1 on his challange truck,if you phone superwinch they wont know anything about them as its pre computerisation,AFAIK its about 25 years old +,with a slight adjustment on the slipper clutch it will pull 5 tons + in faster than a 8274 will free spool out,

paul_humphreys · « **Reply #16 on:** April 08, 2006, 20:43:51 »

Quote from: "RedlineMike"

my mate has 1 on his challange truck,if you phone superwinch they wont know anything about them as its pre computerisation,AFAIK its about 25 years old +,with a slight adjustment on the slipper clutch it will pull 5 tons + in faster than a 8274 will free spool out,

Thanks Mike. How do you adjust the slipper clutch?

Paul

Xtremeteam · « **Reply #17 on:** April 08, 2006, 20:44:59 »

i aint gonna tell you for your own safety,mates got his screwed right up which aint good for the winch & also can over load the rope/wire

JIM 2B · « **Reply #18 on:** April 08, 2006, 21:23:03 »

Hi its a Fairey winch ive have one exactly the same on the front of my forward control, it now runs off the pto from a series box via shafts along the side of the sump using two uj joints, it used to run on hydraulics but the motor part packed in! and im still looking for a replacement! but the shaft drive works just as well, it is very strong winch and would pull a 110 out of the sticky stuff no problem mate.

The plate on top says;

Min cable 8mm. Mine has 13mm cable, 100ft long fitted..

Sheer pin 45 lb ft. this can be changed to suite cable diameter, and saftey in use but its a pain to fit.

Working load 5000 kg.

Theres an additional SWL plate fitted from company who used it to protect over use by employees!

750 kg straight from drum at 30 degrees.

1200 kg straight from drum vertical.

I also have a fitting and use manual for it.
hope this helps..

JIM 2B · « **Reply #19 on:** April 08, 2006, 21:31:06 »

Found site with manual;

http://www.fourfold.ca/LR_FAQ/Series/MANUAL_LRDrumwinch_6920.html

paul_humphreys · « **Reply #20 on:** April 08, 2006, 22:11:48 »

Quote from: "JIM 2B"

Found site with manual;

http://www.fourfold.ca/LR_FAQ/Series/MANUAL_LRDrumwinch_6920.html

Thanks for that. It looks just like mine, other than mine been hydraulic.

Mike, thats ok. I was not planning to do it, just wanted to know how. It will only get used about 4-5 times a year.

Paul

News:

AuthorTopic: What winch is this? (Read 4862 times)