Removed ABS codes. Light still on

[john66]

Hi. I have removed all ABS error codes as it says on-(http://members.mud-club.com/library/?articleid=19) . I have removed sensor cleaned it and re-possitioned,checked all wires and all ok and error codes have not reterned but abs light is still on. What next ?
 (V8 1995 Disco)

   John

[Range Rover Blues]

Stupid questions forst, have you driven it yet? the light goes off at 5 mph.

Ok then did you replace the relay?

Have you re-checked the ECU for new faults?

If so then it's time to check out the wiring or replace the ECU.  You need access to the RAVE cd or similar for the test procedures as stipluated by LR.

I'll have a look later if I remember

[john66]

Yes i have driven it and it stayed on, when the wife gets home i will try swapping over the relay with one of the others. I did re-check the fault codes after driving and the had not come back.

[john66]

Many thanks Range Rover Blues,
It turned out to be the relay after all.
I did swap the relay over the other day, but this wasn't the root cause of the problem, and I didn't try this again after correcting the fault.
Thanks for the suggestion!
john.

[Daz800]

2nd relay problem this week.
Sunday the same thing happoned to my uncles saab.