AuthorTopic: Sportrak and a clutch fitting centre  (Read 1338 times)

0 Members and 1 Guest are viewing this topic.

Offline MrTFWitt

  • Posts: 100
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Sportrak and a clutch fitting centre
« on: July 10, 2006, 16:13:10 »
I was feeling lazy so got a clutch fitting centre to do the clutch on my Sportrak.   Bill ended up at £300 and after 50 miles tops a knackered gearbox.

I'm not sure what other 4x4's are like in the gearbox dept, I've only sat in a Landie once never climbed under one with a spanner but a bit of manual reading reveals the Daihatsu has separate lubrication systems for gearbox and transfer box.  If you pull out the front prop the gearbox drains, if you pull out the rear prop the transfer box drains.

When I pulled the duff gearbox out the transfer box didnt leak anything but the gearbox did.
What I suspect has happened at the clutch centre is they pulled out the props, cursed and swore when oil went everywhere and refilled just the gearbox leaving the transfer box to disintegrate.

The hard part is proving it to the point where I get some redress.
As its an old car I would only want the cost of my scrapyard gearbox back and put the wasted Sunday afternoon down to experience.

What are my chances ?

<Note from Mod - please don't identify companies by name, cheers>

Ooops, sorry.  I keep forgetting about the litigation bit.
Watch out theres a tigger about!

Offline mytj

  • Posts: 89
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • www.myrubicon.co.uk
    • Billing, Northampton
  • Referrals: 0
Sportrak and a clutch fitting centre
« Reply #1 on: July 11, 2006, 20:15:53 »
hi, my clutch thrust bearing went on my jeep,And was told it would cost:£200 fitting + parts.
Took the gearbox out one day,Got the parts and fitted it the next day.
john 8)
Black 07 jeep wrangler jk rubicon.
  lots of photo's on my web site. www.myrubicon.co.uk

Below is a link to site with some great juggling
http://www.youtube.com/watch?v=vDBmXnGaxMI

when i was little i used to go fast down hills on go-carts made out of wood and pram wheels, i haven't changed, just the wheels are bigger!

Offline MrTFWitt

  • Posts: 100
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Sportrak and a clutch fitting centre
« Reply #2 on: July 12, 2006, 11:20:02 »
Yep I would say thats a failed thrust bearing.

I'm expecting to find something similar when I pull the duff 'box to bits.
Watch out theres a tigger about!

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal