Pages: [1]   Go Down

AuthorTopic: Speedo  (Read 1893 times)

0 Members and 1 Guest are viewing this topic.

Offline rustprooflandyracer

  • Posts: 143
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Speedo
« on: July 16, 2006, 19:58:03 »
The speedo needle is jumping all over the place, looks like it is bouncing, used to be pretty accurate but now is reading about 5 - 8 mph under, so having to be careful in speed limit areas... Any suggestions to what it could be? I recently changed the transfer box oil seal could I altered the gear, in that there is play in there, maybe not doing the nut up tight enough, the one with the split pin going through? The mileometer and trip are working well, just the speedo needle bouncing. Hmm  :?:

Cheers
Logged
Matt

Land Rover 1983 88'' CSW, CP Parabolics (3 leaf rears), Recon Turner 2 1/4 diesel, BFG Mud terrains on silver mods (235/85/r16), Galvanised chassis, Midland CB fitted, Rock Sliders, Snorkel, Light Bar. Full NAS Lights, Powerflow Exhaust, Twin Hiclones... and some!

Disco 300TDI - BFG AT's, Light Bar... Work in progress!

Offline blackbob

  • Posts: 1264
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Speedo
« Reply #1 on: July 17, 2006, 08:04:14 »
sounds like a dodgy cable to me :)
Logged
love's mud and lpg and the wife
skype ekken3011

Offline denviks

  • Posts: 1219
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Speedo
« Reply #2 on: July 17, 2006, 08:13:25 »
as above mate....normally the sign of dodgy cable  :wink:  :wink:
Logged
cheers
dennis
more moves than a dad in a disco!!!!!!!!!!


im always @ www.plcuk.co.uk

Offline ian_s

  • Posts: 969
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Speedo
« Reply #3 on: July 17, 2006, 08:23:42 »
either a dodgy cable or that nut aint on tight enough
Logged
series 3 - 200tdi
Discovery V8

Offline Neil Jones

  • Posts: 203
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Speedo
« Reply #4 on: July 17, 2006, 19:07:12 »
I've still got to get around to sorting mine!!  Try taking it out of the back of the speedo and giving it all a good clean, failing that try a new cable, failing that you may need a new worm and gear into the transfer box.
Logged
The winter prepares the earth for the spring, so do afflictions sanctified prepare the soul for glory

Do not worry about tomorrow, for tomorrow will worry about itself

The greatest trick the devil ever pulled was convincing the world he didn't exist.

1972 SWB Diesel
Parabolic Suspension
Capstan winch
Overdrive
Inertia seat belts
LR90 Doors
BFG MT's
CD Player stereo (mounted above passenger)
Snorkel
Axle breathers.

Next on are rock/tree sliders and a new lick of paint!

Offline James.Harwood

  • Posts: 303
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Speedo
« Reply #5 on: July 18, 2006, 07:20:13 »
It could be the worm gear in the gearbox loose or aproaching knackered, probably easier to check the cable first though.
Logged

Offline muddyjames

  • Posts: 3867
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Speedo
« Reply #6 on: September 14, 2006, 18:31:29 »
My cable snapped then I replaced it and it was spot on then snapped again. Changed it again and it bounced around.

I was told that there is a fluid thingy in the back of the speedo that smoothes the bouncing to an acurate speedo and that could have burst or leeked.

Worth a look!
Logged
Rover 620i 223,000 miles on the clock :)
1995 300tdi auto ES Disco. Big Green Giant

Most expensive item for a Disco is????? a round piece of paper stuck on the windscreen!
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal
loading