AuthorTopic: 1 inch lift  (Read 2631 times)

0 Members and 1 Guest are viewing this topic.

Offline needbeer

  • Posts: 146
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
1 inch lift
« on: September 24, 2006, 13:21:28 »
hi im thinking of lifting my disco by an inch or so could i get a way with useing my old shocks and front prop ? and leaving the antiroll bars on can any one help thanks shaun
shaun
 300 tdi disco with a few toys
 needbeer@northants4x4.com
 1970 series 2a with 2.5 td

Guardian.

  • Guest
1 inch lift
« Reply #1 on: September 24, 2006, 13:43:06 »
yes thats all ok, if your only lifting 1 or 2 inches, although you may find things such as props or axles start rumbling if they are getting worn as you are changing how they work and worn into. i have lifted a defender 4inches with just new spring bottom plates i made, and dropped the standard shocks , even at this everything else was fine, however, i didnot use it offroad like a lot of youlot do and that makes quite a difference as nothing is really getting stressed that much on road compared to the power or torque going through the components when off roading.

Offline landroverkeith

  • Moderator
  • ***
  • Posts: 2400
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
  • Wilby
    • wilby, northants
  • Referrals: 0
1 inch lift
« Reply #2 on: September 24, 2006, 15:17:09 »
im gona use a set of wizards 1" spacers on mine i already have the bits needed just waiting to get the new house so i can do it on the drive with a bit of help from a realllly realllllllly nice guy ;) that i hope is watching lol plenty of tea and sarnys too ...
2004 D2 TD5 es Premium - R99 MUD
1965 Series 2a 88" V8 "rag top"          
2000 TD5 Es - W99 MUD
Sankey Trailer
        
 

Offline gtomo2

  • Posts: 1924
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
1 inch lift
« Reply #3 on: September 24, 2006, 20:04:55 »
got a 1 inch lift on mine only thing i changed was the springs for the new ones and took the rear antiroll bar off
Mr Graeme Thomas (tomo)
300 TDi Discovery - So i can go fording
Stop laughing put the camera down AND PASS ME THE TOW ROPE !! PLEASE

Offline way2deep

  • Posts: 850
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
lift
« Reply #4 on: September 26, 2006, 00:35:35 »
body lift it mate ....ya got no problem with props / drivetrain then  :D  :D
robbie
200 tdi rangie  1989  4dr

Offline Xtremeteam

  • Regional Rep
  • *
  • Posts: 6476
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Its just the way i roll
    • lampeter, west wales
  • Referrals: 0
Re: lift
« Reply #5 on: September 26, 2006, 07:42:15 »
Quote from: "way2deep"
body lift it mate ....ya got no problem with props / drivetrain then  :D  :D

go stand in the corner  :lol:
Mike
I can Drive.. You can criticize..
I too can criticize like you.. but can you Drive like me??


Offline Mace

  • Posts: 968
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
1 inch lift
« Reply #6 on: September 26, 2006, 11:20:25 »
I did a 1" lift on mine too. Rear anti-roll bar 'flips' when off road and the front prop shaft U/J (transfer box end) only lasts around 4000 miles.
Mace

"What a waste! What a waste! But the world don't mind"

Discovery 300Tdi 3dr

gords

  • Guest
1 inch lift
« Reply #7 on: September 26, 2006, 12:34:53 »
Quote from: "Mace"
Rear anti-roll bar 'flips' when off road

You just need to add 1" spacers underneath the anti-rollbar mounts.

Offline Mace

  • Posts: 968
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
1 inch lift
« Reply #8 on: September 26, 2006, 12:40:49 »
Quote from: "gords"
Quote from: "Mace"
Rear anti-roll bar 'flips' when off road

You just need to add 1" spacers underneath the anti-rollbar mounts.


and you just need to change the front prop for a double-carden type along with the transfer box output flange :-)
Mace

"What a waste! What a waste! But the world don't mind"

Discovery 300Tdi 3dr

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal