AuthorTopic: spot lamp on stock wiring  (Read 769 times)

0 Members and 1 Guest are viewing this topic.

Offline SnakeLogic

  • Posts: 142
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
spot lamp on stock wiring
« on: November 02, 2006, 23:40:48 »
Hi all.

My question today is this:

If I were to run a roof mounted, rear facing spot lamp (I've got one lying around) off the wiring for the auxiliary back up lights (the ones that activate off the dash panel) WOULD the wiring/fuse be able to handle the draw, or would I just start a fire?

If I had to rewire the whole thing, I'd likely not do it.  In my past experiences with other vehicles, I've learned that car electrics is one part skill and two parts black magic.

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
spot lamp on stock wiring
« Reply #1 on: November 03, 2006, 01:56:22 »
Combination of knowledge and skill, with a bit of logic and common sense added to taste.

Don't run a spot lamps from your reversing lights, use a relay and power from the battery.  You might find a wire behind the RHS rear lamps cluster for the 12S provison for a tow bar, you'll also find provision for a reversing lamp feed to the same.  Hey presto, half the job done for you.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal