Pages: [1]   Go Down

AuthorTopic: Will TD6 wheels fit a P38 ?  (Read 2135 times)

0 Members and 1 Guest are viewing this topic.

Offline v8kenny

  • Posts: 694
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Will TD6 wheels fit a P38 ?
« on: November 27, 2006, 21:37:46 »
Hi Chaps
Have the chance of a set of 18" hurricane alloys and tyres from a 2003 TD6 range rover - would these wheels go straight on my 1996 4.6 HSE ?
I know they are fine size wise but not sure if the hubs or stud centres are the same or if the offset is different, maybe needing spacers - anyone fitted a set ?
Logged
The nice part of living in a small town is that when I don't know what I am doing, someone else does

Offline hairyasswelder

  • Posts: 1351
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • It's gonna cost ya
  • Referrals: 0
Will TD6 wheels fit a P38 ?
« Reply #1 on: November 27, 2006, 22:30:13 »
not fitted a set but they need spacers for the centre of the hub as far as i have been told, seen them available on e-bay for reference

Steve
Logged
'88 RR 3.5 efi, an on going project :o) evolving daily/slowly

Offline v8kenny

  • Posts: 694
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Will TD6 wheels fit a P38 ?
« Reply #2 on: November 27, 2006, 23:08:48 »
Thanks Steve
I had a feeling they would need something - don't fancy mucking about with spacers and I don't suppose they will be cheap
Maybe just wait on a set of 18" wheels for a P38 turning up - I ain't in any hurry    :wink:
Logged
The nice part of living in a small town is that when I don't know what I am doing, someone else does

Offline Xtremeteam

  • Regional Rep
  • *
  • Posts: 6476
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Its just the way i roll
    • lampeter, west wales
  • Referrals: 0
Will TD6 wheels fit a P38 ?
« Reply #3 on: November 27, 2006, 23:21:18 »
Quote from: "v8kenny"
Thanks Steve
I had a feeling they would need something - don't fancy mucking about with spacers and I don't suppose they will be cheap
Maybe just wait on a set of 18" wheels for a P38 turning up - I ain't in any hurry    :wink:


IIRC its a plastic spacer ring that goes over the centre of the hub just to centre the wheel,u also need to get a set of wheel nuts to match the TD6 wheels
Logged
Mike
I can Drive.. You can criticize..
I too can criticize like you.. but can you Drive like me??

Offline v8kenny

  • Posts: 694
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Will TD6 wheels fit a P38 ?
« Reply #4 on: November 27, 2006, 23:23:09 »
Cheers Mikee
Logged
The nice part of living in a small town is that when I don't know what I am doing, someone else does

Offline RR_Aero

  • Posts: 3
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Will TD6 wheels fit a P38 ?
« Reply #5 on: November 27, 2006, 23:40:22 »
Set of Spigot rings and nuts.
oh I mean, no they won;t fit, please pass on the details, thanks  :wink:
Logged

Offline v8kenny

  • Posts: 694
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Will TD6 wheels fit a P38 ?
« Reply #6 on: November 27, 2006, 23:49:46 »
Quote from: "RR_Aero"
Set of Spigot rings and nuts.
oh I mean, no they won;t fit, please pass on the details, thanks  :wink:

Well the guy wants £120 for a set of four with 255/60 bridgestones but your main problem would be they are in Glasgow !
PM me if you want the details - I'm not going to bother with them
Logged
The nice part of living in a small town is that when I don't know what I am doing, someone else does

Offline Xtremeteam

  • Regional Rep
  • *
  • Posts: 6476
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Its just the way i roll
    • lampeter, west wales
  • Referrals: 0
Will TD6 wheels fit a P38 ?
« Reply #7 on: November 27, 2006, 23:58:01 »
£120 for 4 rims & tyres?

i can make them fit my 90:D:D
Logged
Mike
I can Drive.. You can criticize..
I too can criticize like you.. but can you Drive like me??

Offline v8kenny

  • Posts: 694
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Will TD6 wheels fit a P38 ?
« Reply #8 on: November 28, 2006, 00:07:58 »
Quote from: "SmokeyNtheBandit"
£120 for 4 rims & tyres?

i can make them fit my 90:D:D

What ...........................................................and double it's value ??? :lol:
Logged
The nice part of living in a small town is that when I don't know what I am doing, someone else does

Offline bullfrog

  • Posts: 1009
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Will TD6 wheels fit a P38 ?
« Reply #9 on: November 28, 2006, 22:16:35 »
I know 18" hurricanes with tyres new for P38s are about £800 ish if that helps.
I think they came on vogues/HSEs
Logged

Offline v8kenny

  • Posts: 694
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Will TD6 wheels fit a P38 ?
« Reply #10 on: November 28, 2006, 22:34:09 »
Quote from: "bullfrog"
I know 18" hurricanes with tyres new for P38s are about £800 ish if that helps.
I think they came on vogues/HSEs

My HSE is a Jap import which is why I think it only has 16" alloys - the wheels and tyres are as new so I am in no real hurry to change unless a bargain comes up in 18" wheels
I'm afraid there is no way I'm going to chuck 800 odd quid at a set - I'll live with what I've got for the mo  :wink:
Logged
The nice part of living in a small town is that when I don't know what I am doing, someone else does
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal