Forum back online. Please post!
0 Members and 1 Guest are viewing this topic.
If i want to change a 3.5EFi to a 3.9EFi...what do i need to change?I know i need to change the front part of the exhaust, and the gbox crossmember...what else needs modifying?I will be fitting LPG as well.CheersJames
cheers stevesee my thread 'ooops i killed it' and you will see why i need an engine!
(I'm not sure about the 8%, that's about 5 BHP)
For the money, use a 3.5, upgrade the cam and heads if you really need the extra horses then you Just dont put a diesel engine in it :lol: :lol: :lol: :lol:Steve
Even with the carbs it's worth fitting an EFi engine, or at least the heads/exhaust. The EFi only really adds reliability.The hot -wire system is easy to fit if you get the wiring loom with it, without it I wouldn't bother.
Quote from: "Range Rover Blues"Even with the carbs it's worth fitting an EFi engine, or at least the heads/exhaust. The EFi only really adds reliability.The hot -wire system is easy to fit if you get the wiring loom with it, without it I wouldn't bother.The EFI cam will give it a little help too I think :D As for reliability, is there that much of a gain against early flapper system with LPG or is it just 6 of one 1/2 dozen of other?? I know the hotwire is better but with all the mods etc. (old ground)Steve
TBH when the new engine goes in the LPG will get binned, it's running badly at the oment. Whether I bother fitting another sytem or not depends on how much I use the car.