Pages: [1]   Go Down

AuthorTopic: If it aint broke, Keep fixing it!  (Read 1585 times)

0 Members and 1 Guest are viewing this topic.

Offline Berrtie

  • Posts: 8
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
If it aint broke, Keep fixing it!
« on: January 17, 2007, 14:28:04 »
Hey guys, I got a slight...well not a problem, YET, but Im worried it might be in the future.
   So heres the story. I was changing the rear brakes on my Samurai and all went well. I put it in gear and drove it while it was jacked up (2wd ofcourse!) Put it in neutral, left the Engine running, and the wheels started spinning as if it was in gear!
My question to you guys is:
1) Should this be happening?
2) what would cause this?

Im no Mechanic, and thought you guys could help me out with this?
Logged

Offline Boggert

  • Posts: 1408
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
If it aint broke, Keep fixing it!
« Reply #1 on: January 17, 2007, 17:02:42 »
I'm sure this is normal, I remember having a mini that did the same thing, I could stop the whels by hand, However I'm no expert.
Logged
If want to walk it walk it, if you want to ride it ride it just leave me alone to drive it!

"Save The Cheer leader, save the world"

Offline V8MoneyPit

  • Moderator
  • ***
  • Posts: 5077
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
If it aint broke, Keep fixing it!
« Reply #2 on: January 17, 2007, 17:34:22 »
Yes, with no resistance (the ground!) the bearings will still drag the output shaft of the gearbox round. Shouldn't be a problem....... hopefully!
Logged
Rgds
Steve

"Reality is wrong. Dreams are for real."

Land Rover build:
www.daisythediesel.com

Photos (my other passion and weakness):
http://www.flickr.com/photos/v8moneypit/

Offline fudge

  • Posts: 567
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Green Oval Recovery... Chl 30 Shout Help Im Stuck!
  • Referrals: 0
If it aint broke, Keep fixing it!
« Reply #3 on: January 17, 2007, 19:56:10 »
If its a 413 sammy in metallic blue its well and truly sha66ed and you need to sell it to me NOW for £ 50......

If its not.....

Then its as Steve said above and perfectly normal! :wink:
Logged

Offline rollazuki

  • Posts: 869
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
If it aint broke, Keep fixing it!
« Reply #4 on: January 17, 2007, 22:50:13 »
yeah, just drag thru the gears/bearings etc. as long as when U turn the motor off you can still spin the transmission by hand(ie its not locked up)
Logged
Go on....cut me in half........it says SUZUKI all the way thru the middle!!


Offline Berrtie

  • Posts: 8
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
If it aint broke, Keep fixing it!
« Reply #5 on: January 18, 2007, 13:48:27 »
Thanks everyone! You've put my mind at rest
Logged

Offline Popeye

  • Posts: 349
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
If it aint broke, Keep fixing it!
« Reply #6 on: January 18, 2007, 23:29:07 »
Mine does it as well, its not a problem
Logged
Gary
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal