Topic: td5 seats...now converted (Read 1096 times)

Daz800 · « **on:** February 01, 2007, 18:15:32 »

Has anyone fitted td5 (discovery) seats to a 90 and if so how did you do it.

I as as i have a spare set of front seats.

Darryl

Daz800 · « **Reply #1 on:** February 10, 2007, 17:57:48 »

For anyone intrested.

Yes Discovery 2 front seats fit a 90, if you make some plates.
I can post some photos tomorrow and if anyone is thinking of doing this seat change over i can let you know the plate size and drilling dimensions.

Darryl

Xtremeteam · « **Reply #2 on:** February 10, 2007, 18:04:27 »

yeh if you could,considered doing it to mine

Daz800 · « **Reply #3 on:** February 10, 2007, 18:41:01 »

Will post pics tomorrow.

Darryl

Daz800 · « **Reply #4 on:** February 11, 2007, 13:35:06 »

out of a 02 disco 2 and into my 90

Daz800 · « **Reply #5 on:** February 11, 2007, 13:56:39 »

Photos are attached in my gallery under seats

Plates are 6mm thick
you will need
4 off at 65mm x90mm
4 off at 65 x 140

holes are 7mm

from top of plate 10mm in
from side of plate 10mm

hole ctr is 40mm

when drilled i used old seats as template for new plates and i placed the plate so the smaller edge ( to hole) was on the outside face.

seat runner at front of seat is 25mm from top edge of plate

When i was happy i welded the sear runner to the plates

Note
smaller plates go to the front of the seat and if you are short in the leg you will be better off using counter sink screws instead of bolts (i used stainless) just remenber to countersink the hole before welding the plates to the runners

Daz

News:

AuthorTopic: td5 seats...now converted (Read 1096 times)

Daz800

td5 seats...now converted

Daz800

td5 seats...now converted

Xtremeteam

td5 seats...now converted

Daz800

td5 seats...now converted

Daz800

Here are my seats

Daz800

td5 seats...now converted