realy need help

[chady 4x4]

got 1.6 vitara had lotts done to it but realy whant to put 1.8 turbo diesel in it and i got told i would need a adapter plate but car'nt get one.

so if you can help me tar  :lol:

[wheelspinner]

Your best best is to find a dead FSO Caro van/pickup ? this has a pug 1.8 mated to a decent gearbox.

The vitara also came as a commercial van with pug TD engine mated to a gearbox could try and find a crashed one of these.

But apart from that i think Rhino Ray does a mega expensive conversion kit ....£1800...ouch.

Also look on difflock.com someone was doing a conversion with an LDV box.

Regards

Steve

[P.R.Howler]

I know its not a Pug,but, I am still thinking of putting a Sierra 1.8td motor in my 410,should be able to get whole car for £150/200,would save a lot of work too

[chady 4x4]

tar realy need help but its a ford 18t but can get hold of a pug 19t

[wheelspinner]

If you go on Difflock.com - Suzuki section and put a "iam fitting a ford diesel lump in an SJ advice please " type thread there are a couple of people who have done it and will help.
Shouldnt be to much trouble as you will just need the engine and box out of a Sierra/P100.Only trouble is these are heavy and the gearbox is fairly long

http://www.difflock.com/forum/viewtopic.php?t=3873&highlight=ford

http://www.difflock.com/forum/viewtopic.php?t=1663&highlight=ford
As i said before i know a couple of people who have done the Pug conversion using the box out of an LDV van.

http://www.difflock.com/forum/viewtopic.php?t=3353&highlight=ford

Regards

Steve