Hellllooooo alllll...

[MaZzA]

Just got a 92 disco,love it to bits....made a great big heavy duty bumper for it already but need to fit some fatter tyres on it,,,right i know there is a sticky on tyres and i know there are a million posts on here about them,but that is the problem,i now have tyre sizes floating in front of my eyes and am so confused i think me pore little brain has finaly turned to cider!!!!!pic below shows the alloys i have(was gonna change them,but to good to get rid of really)whats the largest tyres i can fit on them,good stock springs,not gonna lift it,like it just the way it is,,(just need fatter tyres).
right thats over and done with,dont shoot the new boy,,,
thanks for reading this rubbish post all..... :roll:[/img]

[cardiff_gareth]

if you look at my aviator pic you'll see mine sitting on 245/70r16's.
Thats the biggest that will go before you have to mod the wheel arches.

[MaZzA]

not to worried about cutting the arches,front i think will be fine with the bumper i made,back i can cut if needs be.
thanks for the fast responce mate...

[cardiff_gareth]

no worries, if you don't mind a little cutting then the 245/75R16 is the next size up. These are a little fatter, you need to cut about 2" from the lower rear wheel arch, not much involved
Front wheel arches are not effected with this size.

[Littledan]

nice looking bumper that u got any pics from teh front??

dan

[Range Rover Blues]

If it's standard height I'd suggest 235/70 R16.  If you buy remoulds then you'll find a MT a little bigger than a road tyre the same size.

Shame you're so far mate or I'd offer to lend you some to try.

[BrumLee]

Just got a 92 disco,love it to bits....made a great big heavy duty bumper for it already

Hi MaZza,

Do you have any plans (dimensions) for your front bumper as I have a welder sitting in my shed dying to get fabricating  

[hairyasswelder]

Just got a 92 disco,love it to bits....made a great big heavy duty bumper for it already

Do you have any plans (dimensions) for your front bumper as I have a welder sitting in my shed dying to get fabricating  

Hope you left the heating on us welders dont like to get cold  :lol:  :lol:

Steve

[wing nut]

hi maz ,mines a similar bumper  ,

[Steven]

Yer tis good, certainly brilliant clearance there...

 8)

[MaZzA]

thanks all for the help,,and the offer to let me try some..gonna try and get some 245/75 to fit,,,worth a laugh....for dimensions,,i used 100x140x10 box for the front which i cut 800mm longthen used the same box to flair the sides but angled it in and up to go flush to the edges,then 25x50 box round the sides to finish it off,,,just made it up as i went along really!!!
more pics below....gonna put some recovery points either side of the number plate to finish it off...

[MaZzA]

nice job there wingnut by the way!!!!!! :D ,,oh and i used 130x12 flat to bolt to the chassis.....hope that helps,any probs give us a shout!!!

[Steven]

Now then MaZzA, those built in spot lights look awesome !  8)

[wing nut]

looks very well made .well done

[Littledan]

those spots do look a tad amazing!!

dan

[MaZzA]

thanks all,,my head is huge now!!!! :shock:
gonna make a steering guard next,been trying to find out where it bolts on to the chassis,anyone got any sizes that i can nick and photos if poss???