Topic: talk to myself (Read 39664 times)

TULL · « **Reply #30 on:** March 29, 2007, 23:39:50 »

is this still going!, ive not been down here for ages

Stormin · « **Reply #31 on:** March 30, 2007, 21:13:44 »

Neither have I, but spotted your post so decided to take a peek.

Drift · « **Reply #32 on:** March 30, 2007, 21:23:55 »

2.8 dont bust that much

Manicminer · « **Reply #33 on:** March 30, 2007, 21:46:37 »

The 3.1 is pretty good too

I actually got my spanners out today and replaced the silencer box and rear tail pipe ready for an MOT next week. Haven't had to use them for months......

Drift · « **Reply #34 on:** March 31, 2007, 01:14:00 »

Quote from: "Manicminer"

The 3.1 is pretty good too

I actually got my spanners out today and replaced the silencer box and rear tail pipe ready for an MOT next week. Haven't had to use them for months......

Shhhhh they will talk about us

:lol: :lol:
The 2.8 and spanners dont talk to each other , thats why they wont break

:lol: :lol: :lol:

muddycarl · « **Reply #35 on:** June 30, 2007, 12:21:51 »

Quote from: "Drift"

Quote from: "Manicminer"
The 3.1 is pretty good too

I actually got my spanners out today and replaced the silencer box and rear tail pipe ready for an MOT next week. Haven't had to use them for months......

Shhhhh they will talk about us :lol: :lol:
The 2.8 and spanners dont talk to each other , thats why they wont break :lol: :lol: :lol:

errrrrr ...sorry guys ..

what are spanners :oops: :lol: :lol: :lol: :lol: :lol: :lol: :lol:

NiceBlueWellies · « **Reply #36 on:** December 21, 2007, 08:32:17 »

Aren't spanners the things that go "in the works"?

jonny ramrod · « **Reply #37 on:** December 21, 2007, 12:41:56 »

spanners are a landy drivers closest friends..... :lol:

666 · « **Reply #38 on:** December 21, 2007, 12:44:04 »

Quote from: "jonny ramrod"

spanners are a landy drivers closest friends..... :lol:

I thought it was duck tape and wd40 :shock: :lol: :lol:

Cheers

Mark

jonny ramrod · « **Reply #39 on:** December 21, 2007, 21:42:06 »

those as well mark....

and water proof trousers to wear when driving in the rain... :D

Drift · « **Reply #40 on:** December 22, 2007, 01:07:14 »

Dont forget the thermals and websco heaters :lol:

Stormin · « **Reply #41 on:** December 29, 2007, 20:24:25 »

Oi! My 90's lasted a lot longer than my Trooper did. Terminal chassis rot. :roll: Tho' the engnes still going strong IN my 90. :D I did have to replace head gasket earlier this year. :(

TULL · « **Reply #42 on:** February 27, 2008, 01:22:39 »

this post is still here! :-.

666 · « **Reply #43 on:** February 27, 2008, 08:27:33 »

Its still here, i think everyone is still waiting for one of our Isuzu engines to break

Cheers

Mark

SSteve · « **Reply #44 on:** February 28, 2008, 03:41:12 »

haven't killed mine yet and I've been trying!

Guardian. · « **Reply #45 on:** March 05, 2008, 20:53:56 »

hi suzi boyz, we are building a load of custom stuff for a swb suzy trooper at the moment, front and rear bumpers with detachable winch trays, and rocksliders, its gonna look kinda cooooooooool!

Drift · « **Reply #46 on:** March 05, 2008, 23:47:52 »

I would be interested in a non winch bumper in a couple of months for a lwb frontera ;)

Something double tubed with spot light fittings

Should I start saving ? :lol:

Guardian. · « **Reply #47 on:** March 06, 2008, 22:49:14 »

to be honest this is a real nightmare, i had far to much work on to do one off work , its megga time consuming, so unless business goes <naughty> up, i will not be doing any others im afraid.
only did this as i promised i would do it ages ago, and dont like to go back on what i say.
its a shame as its a bit more fun doing different stuff, but have to concentrate on what we do really!
looking for another engineer at the moment, if that works out and i can free up some time myself, then i will go back into one offs again, but at the moment struggling to find someone who can weld.

666 · « **Reply #48 on:** March 11, 2008, 10:09:44 »

Quote from: Guardian. on March 06, 2008, 22:49:14

to be honest this is a real nightmare, i had far to much work on to do one off work , its megga time consuming, so unless business goes tits up, i will not be doing any others im afraid.
only did this as i promised i would do it ages ago, and dont like to go back on what i say.
its a shame as its a bit more fun doing different stuff, but have to concentrate on what we do really!
looking for another engineer at the moment, if that works out and i can free up some time myself, then i will go back into one offs again, but at the moment struggling to find someone who can weld.

Shame im so far away, could have done some weekend work for you :roll:

Cheers

Mark

NiceBlueWellies · « **Reply #49 on:** April 18, 2008, 10:26:48 »

Blooming heck, for want of a better phrase, I've been away for yonks, and this is still going!!!!!!!!!!!!!!!!!!!!!!!!

Hi everyone. I'm back. :lol:

How you doin? ;)

666 · « **Reply #50 on:** April 18, 2008, 11:45:54 »

Think we are all still here, just not broken down yet :P

Cheers

Mark

Manicminer · « **Reply #51 on:** April 18, 2008, 20:13:28 »

Hi NBW. It's been a long time.

Sold mine a couple of weeks ago. Had my moneys worth out of it ;)

sweeney · « **Reply #52 on:** June 28, 2008, 20:46:15 »

Hello everyone,
a newbie here,got my first 4x4 a couple of months back and i love it and so do the 3 kids and mrs.
it looks like a beast,loads of room,leather,full electrics built to last what more could i ask for. [don't mention fuel prices]

its not that thirsty,my last car was a petrol audi a4,1.8 turbo and i reckon the monterey is a little better on mpg,

speak with u guys soon, :-$ :-$ ( i'm whispering as its very quiet on here ) :-$ :-$

mark. :D

NiceBlueWellies · « **Reply #53 on:** October 21, 2008, 16:38:53 »

I can hear the tumble weed, lol. :shock: :shock:

666 · « **Reply #54 on:** October 21, 2008, 23:37:58 »

Quote from: NiceBlueWellies on October 21, 2008, 16:38:53

I can hear the tumble weed, lol. :shock: :shock:

Hear it?? Im sick of falling over it :lol: :lol: :lol:

Cheers

Mark

ps, still not broken down

NiceBlueWellies · « **Reply #55 on:** November 25, 2008, 11:10:02 »

You broken down yet Mark? :lol:

666 · « **Reply #56 on:** November 25, 2008, 15:20:34 »

Quote from: NiceBlueWellies on November 25, 2008, 11:10:02

You broken down yet Mark? :lol:

Still plodding on, apart from a dodgy wheel bearing on the toyota axle :roll: :roll:

NiceBlueWellies · « **Reply #57 on:** November 25, 2008, 16:38:14 »

You best get that changed then. You don't want it welding itself on!!!! 8-[

666 · « **Reply #58 on:** November 25, 2008, 18:48:00 »

Quote from: NiceBlueWellies on November 25, 2008, 16:38:14

You best get that changed then. You don't want it welding itself on!!!! 8-[

loads of time to sort that out, just bought myself a new toy of ebay!
Previous owner drowned it and ended up putting a con rod through the sump!

Just looking for a replacement engine and then taking my LWB off the road for a while for a bit of TLC (mainly replacing a front axle and loads of panels)

My new toy................................................

NiceBlueWellies · « **Reply #59 on:** November 25, 2008, 21:25:17 »

Not much to do there then :D

Good luck

News:

AuthorTopic: talk to myself (Read 39664 times)

Drift

Drift

Drift

Guardian.

Drift

Guardian.