Pages: [1]   Go Down

AuthorTopic: MOT ?  (Read 1238 times)

0 Members and 1 Guest are viewing this topic.

Offline andyhubbard

  • Posts: 788
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
MOT ?
« on: June 16, 2007, 20:59:39 »
Does the rear wheel arches near to the door shuts come under the MOT or not and would like confirmation before i commit to buy it,cheers Andy.
Logged

Offline hobbit

  • Posts: 4750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
MOT ?
« Reply #1 on: June 16, 2007, 21:06:31 »
In what way Andy?
Logged
Kev

'91 stretch Discovery 200 Tdi
Hybrid for running round (got to go now)
Srs 3 Lightweight petrol (got to go)
Srs 3 Lightweight petrol, runabout

Not every problem can be solved with duct tape, and it's exactly for those situations we have WD 40

Offline RichardM

  • Posts: 131
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
MOT ?
« Reply #2 on: June 16, 2007, 21:46:41 »
if they are corroded within X centimetres of the seat belt mounting then its a fail. Sorry, can't remember what X is
Logged
Richard Martin
Cardiff
1994 300Tdi Automatic

Offline driftwood

  • Posts: 421
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
MOT ?
« Reply #3 on: June 16, 2007, 21:50:34 »
http://www.motuk.co.uk/manual/contents.htm

http://www.motester.co.uk/cog.html

have a go with these, looks like 30cm :wink: someone will be able to confirm this
Logged

Offline andyhubbard

  • Posts: 788
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
MOT ?
« Reply #4 on: June 17, 2007, 08:10:02 »
If it is within 30cm then i think it would fail. Hi Kev-it's where you have the door seal that comes down and over the wheel arch and close to the rear seat so i assume it's close to the bottom seat belt mounting point.
Logged

Offline muddydisco

  • Posts: 307
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
MOT ?
« Reply #5 on: June 17, 2007, 08:35:18 »
Yes if it's within 30cm of a seat belt mounting or body mounting. Which it will be it will fail the test. :cry:
Logged
YOU BEND IT YOU MEND IT

Offline hobbit

  • Posts: 4750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
MOT ?
« Reply #6 on: June 17, 2007, 08:39:11 »
Sounds like it then, wern't sure if it was rot near a stress point or sharp edges protruding out at the side, as said either one will cause you grief

Looks like a bit of plating to be done then
Logged
Kev

'91 stretch Discovery 200 Tdi
Hybrid for running round (got to go now)
Srs 3 Lightweight petrol (got to go)
Srs 3 Lightweight petrol, runabout

Not every problem can be solved with duct tape, and it's exactly for those situations we have WD 40

Offline RichardM

  • Posts: 131
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
MOT ?
« Reply #7 on: June 17, 2007, 21:33:31 »
Quote from: "hobbit"
Sounds like it then, wern't sure if it was rot near a stress point or sharp edges protruding out at the side, as said either one will cause you grief

Looks like a bit of plating to be done then


I've just done the passenger side on mine this weekend.  It's quite straight forward, I spent more time stripping the trim out and painting and sealing after and re-assembling than I did making the plates and welding them in
Logged
Richard Martin
Cardiff
1994 300Tdi Automatic

Offline andyhubbard

  • Posts: 788
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
MOT ?
« Reply #8 on: June 17, 2007, 23:05:58 »
Thanks for the replies guys,think i will take it for the test and see what else may be there before i buy itcheers Andy.
Logged
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal