AuthorTopic: Oil for gearbox and transfer box etc  (Read 1870 times)

0 Members and 1 Guest are viewing this topic.

Offline tjsj

  • Posts: 266
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Oil for gearbox and transfer box etc
« on: August 02, 2007, 12:25:10 »
My mate has a series 2 and needs to know what kind of oil to put in the diffs and the gearbox and transfer box. I thought it was EP90 in diffs and transfer box then ATF in the gearbox?
Tom

G-reg Disco 200tdi
3 inch pro-comp suspension lift
nice set of new machos

WANTED: Cheap snorkel, doesn't really matter what it looks like, just as long as I can do some wading!!!

Offline James.Harwood

  • Posts: 303
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Oil for gearbox and transfer box etc
« Reply #1 on: August 02, 2007, 19:37:10 »
EP90 in axles all gearboxes swivel joints stearing relay and box.

EP80 or 80W90 is not suitable and shouldn't be used

Offline S188

  • Posts: 189
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Oil for gearbox and transfer box etc
« Reply #2 on: August 03, 2007, 00:56:11 »
80W90 is fine in a series 'box, slightly nicer when the box is cold, acts just like EP90 when warm.  The thing to watch for is GL4 spec, you need it for the main box.  Alot of modern oils are GL5 but thats not good for yellow metals - I think its only the main box that contains them.  Transferbox and axles aren't fussy.  Anythings much better than nothing so regular level checks are the most important thing.
Glen
1956 88" Station Wagon
1992 VW Transporter Syncro
19** assorted broken machinery

Offline Pete

  • Posts: 248
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 1
Oil for gearbox and transfer box etc
« Reply #3 on: August 03, 2007, 18:21:04 »
Whatever you do.
 Don't put ATF in a series box, it will kill it.
 Pete.

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Oil for gearbox and transfer box etc
« Reply #4 on: August 05, 2007, 00:16:11 »
Quote from: "S188"
The thing to watch for is GL4 spec, you need it for the main box.  Alot of modern oils are GL5 but thats not good for yellow metals - I think its only the main box that contains them.  Transferbox and axles aren't fussy.  Anythings much better than nothing so regular level checks are the most important thing.


Didn't know that, can you elaborate?

I did notice that Halfrauds went back to GL4 recently.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline tomarse

  • Posts: 260
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Oil for gearbox and transfer box etc
« Reply #5 on: August 05, 2007, 12:04:22 »
Quote from: "tjsj"
My mate has a series 2 and needs to know what kind of oil to put in the diffs and the gearbox and transfer box. I thought it was EP90 in diffs and transfer box then ATF in the gearbox?


all you need to run a series is EP90 and engine oil :)

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal