AuthorTopic: Here we go ... the first of many problems I expect  (Read 737 times)

0 Members and 1 Guest are viewing this topic.

Offline SteveGoodz

  • Posts: 561
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Here we go ... the first of many problems I expect
« on: August 05, 2007, 16:09:31 »
Took the grandchildren to Weston-on-the-Mud yesterday and parked up on the beach. Thought it would be a bit of a laugh to select low box and diff lock ~ both totally unnecessary, I know ~ on the sand.

Problem? Transfer lever won't budge in any direction ~ can't get it out of high range/unlocked  :(

Where should I start looking first?
Regards

Steve G
"Paddy" a 1996 3.9 V8 ES Auto Discovery
A re-imported Japanese model running on LPG

Offline beast5680

  • Regional Rep
  • *
  • Posts: 2938
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • hailsham east sussex
  • Referrals: 0
Here we go ... the first of many problems I expect
« Reply #1 on: August 05, 2007, 16:24:02 »
i suspect the lever is seized in the top housing it sits in on the gearbox, i had the same on one of mine, you need to just lie under it first and check the linkage but if thats all correct your going to be taking the centre console out to get to the housing to unseize the lever shaft
Neal

let him that hath understanding reckon the number of the beast

He, who laughs last, laughs best. He who laughs at Chuck Norris dies.

Offline SteveGoodz

  • Posts: 561
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Here we go ... the first of many problems I expect
« Reply #2 on: August 05, 2007, 20:57:47 »
Quote from: "beast5680"
i suspect the lever is seized in the top housing it sits in on the gearbox, i had the same on one of mine, you need to just lie under it first and check the linkage but if thats all correct your going to be taking the centre console out to get to the housing to unseize the lever shaft


[!Expletive Deleted!]! It'll be just my luck to need the centre console out ~ I had it out on Friday to remove a handsfree car kit  :(

Anyone interested in a Nokia CARK-91 handsfree and Nokia 6310i phone?
Regards

Steve G
"Paddy" a 1996 3.9 V8 ES Auto Discovery
A re-imported Japanese model running on LPG

Offline jono

  • Posts: 35
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Here we go ... the first of many problems I expect
« Reply #3 on: August 06, 2007, 16:24:38 »
This can be a useful link when trying to free a stuck CDL.
Jono
"grep" - 1992 Discovery 200Tdi
Procomp 2" Lift, Steering Guard, QT Diff Guards, Safari Snorkel, Axle Breathers, Bearmach Rock Sliders, 6 x Spots, CB, 235/70/16 Amazon T/A's


Offline auf_wiedersehen_pet

  • Posts: 1179
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Here we go ... the first of many problems I expect
« Reply #4 on: August 08, 2007, 16:36:10 »
On the subject (almost). I used to own a Disco V8 which would never select diff lock - Hi/Lo was fine. Turns out it was retro fitted with a RR Viscous Box of tricks so it was working as intended.
Rob Steele

1995 Land Rover Discovery 300 TDi - Everyday Car (Ex Jap)
2007 Toyota Avensis 2.2 T-180 - Sensible Car (Ex TSB Bank)

Offline SteveGoodz

  • Posts: 561
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Here we go ... the first of many problems I expect
« Reply #5 on: August 08, 2007, 22:53:49 »
Quote from: "auf_wiedersehen_pet"
On the subject (almost). I used to own a Disco V8 which would never select diff lock - Hi/Lo was fine. Turns out it was retro fitted with a RR Viscous Box of tricks so it was working as intended.


Oohh! Hadn't thought of that one. Anyway I've added this to the list of additional jobs for my man to do ~ if you're really posh, get the butler to do it  :D .

The list is growing by the day  :(
Regards

Steve G
"Paddy" a 1996 3.9 V8 ES Auto Discovery
A re-imported Japanese model running on LPG

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal