Pages: [1]   Go Down

AuthorTopic: Drive Flanges  (Read 746 times)

0 Members and 1 Guest are viewing this topic.

Offline Lewis Bernard

  • Posts: 32
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Drive Flanges
« on: September 07, 2007, 11:41:34 »
Hi,

does anybody know the torque settings for the drive flanges from each end of the transfer box, and from both the front and rear diff? Disco 300tdi (1998). Changed all my UJ's, noticed oil leaking form the transfer box all over my handbrake (so thats why it didn't hold on hills!) and both diffs had little trickles coming out. Replaced the seals, but nothing in the haynes manual of confusion about the correct torque settings.

Cheers guys.
Logged

Offline chris9119

  • Posts: 1400
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • The New Big Boy, Gert...
    • Lordswood, Kent
  • Referrals: 0
Drive Flanges
« Reply #1 on: September 07, 2007, 16:42:28 »
I always find that kin tight is ok......, fkin tight is usually to much

In other words, I don't know, but someone else will be along shortly......, yes, I know your names not shortly :lol:  :lol:
Logged
Chris
Si hoc adfixum in obice legere potes, et liberaliter educatus et nimis propinquus ades

http://members.mud-club.com/profiles/chris9119/gallery

Mud-Clubbers do it on channel 30





Offline Lewis Bernard

  • Posts: 32
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Drive Flanges
« Reply #2 on: September 07, 2007, 17:05:41 »
kin tight being around 100NM!!!???
Logged

Offline clbarclay

  • Posts: 1615
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Drive Flanges
« Reply #3 on: September 07, 2007, 17:32:00 »
Whoops

Got confused about which part you were on about :oops:
Logged
Chris

Various range rovers from 1986 to 1988 in various states
Locost sports car based on mk2 escort - currently working on brakes, fuel and wiring

Offline hobbit

  • Posts: 4750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Drive Flanges
« Reply #4 on: September 08, 2007, 00:39:49 »
Well looking at the manual for an LT230Q transfer box

It says 162Nm or 120 foot/pounds

Don't know if that is what you have or not though, but it should give you a ball-park figure to work from
Logged
Kev

'91 stretch Discovery 200 Tdi
Hybrid for running round (got to go now)
Srs 3 Lightweight petrol (got to go)
Srs 3 Lightweight petrol, runabout

Not every problem can be solved with duct tape, and it's exactly for those situations we have WD 40

Offline Lewis Bernard

  • Posts: 32
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Drive Flanges
« Reply #5 on: September 10, 2007, 19:57:39 »
all sorted, cheers for your help guys!
Logged
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal