radius arms re welding advise

[jamesey]

i will need my radius arms rewelding after i have lifted my jimny but where would do it and know what i mean near me in in  the derbyshire area

[wrecker]

what about your local welding firm,if you tell them what you want done,or show them i think it would be ok :)

[generation-x]

james wot sort of lift have you got to have to re-weld ur radius arms?

id be a bit warey of welding a major suspension component but maybe its me

simon

[jamesey]

i have the full kit from explorer uk  2" springs and pro comp shocks , extended brake hoses  , will i need the correction bars altering

[generation-x]

james drop onto my website we have a few jimny guys who will be
able to advise you better than me
but id say u dont have to with the 2" kit

simon

[jamesey]

will do cheers

[glaggs]

You shouldn't have to worry about the rear radius arms with a 2" lift. I've had no trouble with Mine. I did mod the front axel as discribed on a thread on Mu club to counter the lift effects on steering at the front and having bent 4 front arms my fronts are now reinforced with lengths of angle 'iron'. so far with no ill effects. I'd leave the rears if it was me. You may have to look at modding the bottom shock mounts, I run pro-comps up-side down and it seems to work as they are gas filled. Run them the right way up and they catch on the spring mounts.