AuthorTopic: Springs Back In!  (Read 732 times)

0 Members and 1 Guest are viewing this topic.

Offline Skibum346

  • Posts: 1975
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • T. A. N. S. T. A. A. F. L.
  • Referrals: 0
Springs Back In!
« on: September 29, 2007, 19:52:13 »
I'd not been off road since lifting my disco until I got to the Billing Bash. When I got home, I realised that the top of the rear springs was sitting just outside the seat.

I finally got round today to fitting a set of cones and getting the springs back in the right place!

Didn't take any pics I'm afraid but my one tip is... even if you have spring compressors... don't use them... halfway thorugh slowly winding one spring down I realisd that undoing the two bolts on the retaining bar at the bottom and the spring lifted off!  :oops:

Another tip... make sure it's well chocked when jacking... Mine rolled a little and the jack stand was looking a little precarious till I sorted things out. Must be my blonde day today!  :oops:  :oops:

Finally, don't buy air tools from Netto! I've already returned the air drill cuz the union wouldn't hold air. Today I got all excited about using the impact wrench and ratchet... the ratchet spat air from the handle like a fountain and I could hold the business end of the ratchet and stop it without too much trouble.  :x   I replcaed the cheapo drill I returned with a Clarke equivalent and it's like a pair of Nike trainers... it just does it! Moral of the story is... cheap's not always best! :roll:   :oops:  :oops:  :oops:

Offline clbarclay

  • Posts: 1615
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Springs Back In!
« Reply #1 on: September 29, 2007, 22:09:40 »
Clarke tools expensive??

I've seen the price of some of the air tools at work, some are £1000 a time :shock: It all depends how long you expect them to last for though.
Chris

Various range rovers from 1986 to 1988 in various states
Locost sports car based on mk2 escort - currently working on brakes, fuel and wiring

Offline Iain C

  • Posts: 272
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Springs Back In!
« Reply #2 on: September 30, 2007, 00:57:53 »
Well chocked?

I just found a groovy LR supplied chock thingy today next to my airbox...never knew it was there!!
1995 Discovery 300 Tdi...steering guard, diff guards, +2" full lift kit/ProComp 9000s, extended braided brake hoses, 265/75/16 MTs on Freestyles, Camel Cut, Team ME4 CB, Southdown snorkel, Defender A-bar and Wipac 4x4s, Forte treatment in anything that moves and a shiny new boot floor!

Offline discoverytdi

  • Posts: 37
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Springs Back In!
« Reply #3 on: September 30, 2007, 22:51:05 »
Prefer a mars bar myself. oops that kind of chock  :oops:
you cook your chips with it I run my truck on it. VEG OIL THE WAY FORWARD

Offline electricbluebadger

  • Posts: 305
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Springs Back In!
« Reply #4 on: September 30, 2007, 23:12:45 »
Pete (Scorpio on various forums) had a similar incident, didnt notice his dislocated spring top, got from Kirton to Birmingham before he smelt the burning rubber as the inside of his tyre was rubbed down to the carcass whilst towing a huge twin axle caravan...... very very lucky

Cheers Steve

Offline Skibum346

  • Posts: 1975
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • T. A. N. S. T. A. A. F. L.
  • Referrals: 0
Springs Back In!
« Reply #5 on: October 01, 2007, 08:40:26 »
Quote from: "electricbluebadger"
Pete (Scorpio on various forums) had a similar incident, didnt notice his dislocated spring top, got from Kirton to Birmingham before he smelt the burning rubber as the inside of his tyre was rubbed down to the carcass whilst towing a huge twin axle caravan...... very very lucky

Cheers Steve

I guess I was lucky... it was just the outside of the top coil that was dislocated... both sides... Was well away from the tyre.

Skibum

Offline Skibum346

  • Posts: 1975
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • T. A. N. S. T. A. A. F. L.
  • Referrals: 0
Springs Back In!
« Reply #6 on: October 01, 2007, 08:43:02 »
Quote from: "clbarclay"
Clarke tools expensive??

I've seen the price of some of the air tools at work, some are £1000 a time :shock: It all depends how long you expect them to last for though.


You have a point... but for the keen amatuer... Clarke is plnty good enough... and by comparison... they are twice the price of the NETTO stuff.

Course... if one of the £100 tools was to suddenly become a vailable... for peanuts... I might be tempted... not that I'm suggesting anything you understand!!!!  :lol:  :lol:

Skibum

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal