need another plus 2 of lift but which would u take it up.

[J B]

drive onto 4 of these for a instant and spectaclier 7" lift  8)

[redhand]

Fit a flying bridge. it worked for hammond and his cruiser.

[extreme90]

no am sorry, but these are the babys, as on show underneath mark evans landy

the " extreme ramps " are made from unique extremely rare angle iron which goes through a chemical dip process which makes these ramps truely extreme
theres no bendin these ramps, there far superior to other " cheaper brands "
they come in a choice of extreme powdercoat colour like extreme orange for example

all for the cheap price of 600 quid
lmao
mike ( xtremeteam will get this along with a few others  :lol: )
dan

[Guardian.]

YOU LOT ARE FUNNY :lol:  :lol:  :lol:

[mentalmoshio sophs V8i]

drive onto 4 of these for a instant and spectaclier 7" lift  8)

where sells they for 4x4 tyres

[Disco Matt]

Try a commercial vehicle specialist - someone must make wider ones.

I do like that side exit exhaust. Was it a one-off custom build or does someone sell them?

[mentalmoshio sophs V8i]

steveo?

hi matt custom fit jobby id say around 250 quid to make . according to some members on haveing 4 exhuast pipes make u a chav. thats not gonna sit well with thrasher and a few fellow je people is it.

all i say go for it its ur truck at the end of the day plus quads sound great

[Steven]

Is that your truck Steveo?

[Gav_T]

Yeah come on!

Is it you discovery steveo4.0v816vtwinturbo10millionbhpquadexhaustwannabechavthatshouldbedrivingaricerocketoracorsa ????

Gav.

[pux]

mentalwhateveryournameis.........yes it may upset some je owners on my comment about yours looking like a chav mobile exhaust but from what i have seen most of thiers look really nice where as urs looks like you have accidently back in to ripspeed in halfords :roll:

[treeman]

 :lol:  :lol:  :lol:  :lol: if i laugh anymore im gonna end up in a&e  :lol:  :lol:  :lol:  :clap:

[stuvy]

quote
Is it you discovery steveo4.0v816vtwinturbo10millionbhpquadexhaustwannabechavthatshouldbedrivingaricerocketoracorsa ????

Gav.
[/quote]

Is that your truck Steveo?

lol thats all i can say chaps!!

[muddydisco]

Well just brought this baby

Going rip the 300 out and put a v8. :P

UNDERBODY GUARDS,HEADLIGHT GAURDS, 2INCH LIFT, 265/75/16 MACHOS, TUBLAR WINCH BUMPER WITH GS8000 WINCH, CHEQUERPLATE , QUAD 4 INCH EXHUAST, ROOF RACK, ROOF LIGHTS , ANGEL EYE AND BLUE HEADLIGHTS AND FOGS. LOAD BARS, PERFORMANCE ENGINE PARTS, REAR WORK. LIGHT, FREESTYLE ALLOYS WITH 235/85/16 ROAD TYRES, CD PLAYER, DIGITAL TELE , HARD DRIVE MUSIC CENTRE .  REAR LADDER.LOADS OF BODY GRAPHICS

SELL IT FOR PEANUTS

[Jeff J J]

This is ones of the blokes in the Discovery Owners Club did he put Uni Mog axle's on it thats some hight. Jeff

[L90OOK]

Well just brought this baby

Going rip the 300 out and put a v8. :P

UNDERBODY GUARDS,HEADLIGHT GAURDS, 2INCH LIFT, 265/75/16 MACHOS, TUBLAR WINCH BUMPER WITH GS8000 WINCH, CHEQUERPLATE , QUAD 4 INCH EXHUAST, ROOF RACK, ROOF LIGHTS , ANGEL EYE AND BLUE HEADLIGHTS AND FOGS. LOAD BARS, PERFORMANCE ENGINE PARTS, REAR WORK. LIGHT, FREESTYLE ALLOYS WITH 235/85/16 ROAD TYRES, CD PLAYER, DIGITAL TELE , HARD DRIVE MUSIC CENTRE .  REAR LADDER.LOADS OF BODY GRAPHICS

SELL IT FOR PEANUTS

PMSL  :joker: ....you forgot the ugly bolt ons  :scold: :lol:

[Guardian.]

his typing is worse than mine.

[stageonesimmo]

steveo?

hi matt custom fit jobby id say around 250 quid to make . according to some members on haveing 4 exhuast pipes make u a chav. thats not gonna sit well with thrasher and a few fellow je people is it.

all i say go for it its ur truck at the end of the day plus quads sound great

You'd have to be talking about quad bikes then cos that's not a quad exhaust now is it?  Bungin a halfrauds special on the last 4 inches of 1 pipe does not magically make it 2 all the back down the truck now does it and it wont do a hell of a lot about changing teh sound either - Plus, whats the other silencer looking thing for at the top of the picture, looks like an overly complicated set-up to me and very restrictive with it I'd reckon.....

Oh and to get back on topic, I'm with extended bump-stops as well - with my limited knowledge of suspension geometry, I'd reckon you need them anyway eventually?

[POTASH]

that just needs some neon lights underneath :doh:

[davidlandy]

in the twin exhaust piccy what it that large stainless cylinder on the rear cross member?

[stageonesimmo]

Thats what I asked and looking at it again I'm convinced its another silencer - but why is beyond me!  :roll:

[Disco Matt]

I thought it was a rather odd tubular rear bumper?

[corrosiverob]

cant stop laughing  :lol: :lol: :lol:

[wizard]

steveo?

hi matt custom fit jobby id say around 250 quid to make . according to some members on haveing 4 exhuast pipes make u a chav. thats not gonna sit well with thrasher and a few fellow je people is it.

all i say go for it its ur truck at the end of the day plus quads sound great

You'd have to be talking about quad bikes then cos that's not a quad exhaust now is it?  Bungin a halfrauds special on the last 4 inches of 1 pipe does not magically make it 2 all the back down the truck now does it and it wont do a hell of a lot about changing teh sound either - Plus, whats the other silencer looking thing for at the top of the picture, looks like an overly complicated set-up to me and very restrictive with it I'd reckon.....

Oh and to get back on topic, I'm with extended bump-stops as well - with my limited knowledge of suspension geometry, I'd reckon you need them anyway eventually?

I dunno who actually owns this Disco but DAM THATS NASTY. If you are going to put that much effort into a twin exhaust system then get it done properly, not by a quick fit apprentice.
I doubt it will last long once you get it off road.

wizard :twisted:

[Disco Matt]

Yes - looking at it again there is one thing puzzling me - why does it cross behind the back axle like that rather than just coming out on the left hand side as per usual? Just seems unneccesary pipework to me!

[stuntman]

It looks like that thicker pipe on the left of the picture is a 'T' peice with splits the exhaust into 2 a left and right bank which finishes up with the fake twins at either side on those particularly nasty outlet plates.

I'm not knocking the owner of the vehicle, maybe he didn't know the level of workmanship he would end up with but it is quite poor, that T piece would majorly effect the backpressure in a negative way.

I really hope he never paid too much for that, as a decent exhaust manufacturer would have tuned the exhaust for his requirements. That exhaust could feasably be attched to a tdi! Sorry but it gets the  :clap: :clap: :clap: :clap: Slow clap award.

Andi

[mentalmoshio sophs V8i]

Is that your truck Steveo?

HERE MINE..............

the black one isnt mine got it , saw it a while back for sale . its not really my cup of tea but its a crazy set up

[corrosiverob]

Is the missus holding it up or is she stuck??

What happens when you go off roading? friend of mine fitted a cherry bomb  lost it on the first outing!

[mentalmoshio sophs V8i]

no problems yet with it .   :dance:

besides my money on the ends caps being ripped off

[mentalmoshio sophs V8i]

in the twin exhaust piccy what it that large stainless cylinder on the rear cross member?

its a rear bumper 

[Gav_T]

Does the pikey bloke have to go everywhere holding the other chav cannon?

Gav.