Pages: [1]   Go Down

AuthorTopic: Who knows anything about V8?  (Read 1588 times)

0 Members and 1 Guest are viewing this topic.

Offline BigSi

  • Posts: 340
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Who knows anything about V8?
« on: December 26, 2007, 14:13:17 »
This is driving me nuts! Bought a new distributor (module on side) for the correct year (1986) and engine (3.5 efi), only for the garage to tell me that it would not fit (PAS bracket in the way). I also bought a new starter motor, again for the correct year and engine, only to find that when offering the new unit up, the old unit is much bigger? I assumed that the larger starter motors were only fitted on pre efi engines?  :shock:  :shock:  :shock:  :shock:


PS: Im starting to wonder if it's a carb unit retro-fitted with an efi system?
Logged
“I am an expert of electricity. My father occupied the chair of applied electricity at the state prison.”

ben_haynes

  • Guest
Who knows anything about V8?
« Reply #1 on: December 26, 2007, 14:31:57 »
dont know about the Distributer but i guess it should fit they are not trying hard enough

but the starter is a straight swap large and small fit unless you have tubular manifolds then it is a bit tighter but fits still
Logged

Offline BigSi

  • Posts: 340
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Who knows anything about V8?
« Reply #2 on: December 26, 2007, 15:21:51 »
Cool. I was worried that I had bought the wrong unit (tomorrows job).

I also managed to uncover the engine number (wasn't a wasted day!), and it is the right engine.  :D  :D  :D  :D

As for the Distributer, I might get another garage to look at it. I would have a go myself, but don't want to mess the settings up.

PS: which side of the engine is your alternator (looking from the front)?
Logged
“I am an expert of electricity. My father occupied the chair of applied electricity at the state prison.”

Offline hairyasswelder

  • Posts: 1351
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • It's gonna cost ya
  • Referrals: 0
Who knows anything about V8?
« Reply #3 on: December 26, 2007, 16:37:43 »
88 efi RR
<<<<<
mine is on the top right as you look into the engine bay from the front
Logged
'88 RR 3.5 efi, an on going project :o) evolving daily/slowly

Offline Bowie

  • Posts: 204
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Who knows anything about V8?
« Reply #4 on: December 26, 2007, 17:53:29 »
Mines on the top right too...

If the PAS bracket is in the way it sounds like they are putting the dizzy in in the wrong position, 'normally' it sits behind the PAS bracket...

This is assuming you have the crank pulley leading to the PAS pump on one belt, then another belt from the PAS pump to the alternator.

HTH.

Bowie.
Logged
1980 SIII Lightweight 2.25 Petrol - completely standard.
1991 Range Rover Vogue SE 3.9 V8 - now on LPG (sorted!), 2" lift, mud tyres, and more to come...

ben_haynes

  • Guest
Who knows anything about V8?
« Reply #5 on: December 26, 2007, 18:16:17 »
mine is the same as yours and thats on a carb disco and raro
Logged

Offline jjsaul

  • Posts: 1534
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Leeds, West Yorks
  • Referrals: 0
Who knows anything about V8?
« Reply #6 on: December 27, 2007, 00:33:19 »
i think the efi system came in on 86 so you could well have a collection of bits from efi and pre efi...land rover were excellent at doing stupid things like that on changeover models
Logged
James

...lovin dirty days out...

1983 OneTen V8 Station Wagon 3.5 (LPG)
1972 Range Rover V8
1992 Range Rover 4.6 (LPG)
1978 Range Rover Carmichael Commando 6x4
1972 Range Rover - Major project, FOR SALE
1976 Range Rover - Less of a project, FOR SALE
Previously: Range Rovers 1988, 1990 and others...
2005 Volvo V70 T5 SE (LPG) - daily driver

Offline barriesheene

  • Posts: 139
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Who knows anything about V8?
« Reply #7 on: January 05, 2008, 16:14:18 »
Hope these help, just changed mine  :afro:






Logged
CBR900RR FIREBLADE ( urban tiger GGRRRRRR !!!!!) SOLD needed money to fix the rangie
2.5 PAJERO LWB EXCEED
AVONDALE MAYFLY SOLD needed money to fix the rangie
RANGEROVER 3.9 V8 STRAIGHT THROUGH EXHAUST AND VERY MUDDY :) makes me laugh everytime i rev it

Offline BigSi

  • Posts: 340
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Who knows anything about V8?
« Reply #8 on: January 05, 2008, 18:18:10 »
Thanks for the pics. Will check them against mine when it comes back from the garage!
Logged
“I am an expert of electricity. My father occupied the chair of applied electricity at the state prison.”

Offline Lucy1978

  • Posts: 516
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Who knows anything about V8?
« Reply #9 on: January 07, 2008, 12:29:30 »
there's a good forum dedicated to v8s if you get stuck it's on here http://www.v8-org.co.ukhttp://www.v-8.org.uk
Logged
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal