AuthorTopic: help!  (Read 2650 times)

0 Members and 1 Guest are viewing this topic.

Offline paul.p

  • Posts: 143
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
help!
« on: January 02, 2008, 16:31:01 »
removed the egr on my 300tdi yesterday, now i've lost power, wont rev over 3000rpm, thought may be dodgy top hose but when checked it just now when rev it out of gear it chucks out black then white smoke and the top hose from intercooler expands? any ideas please??

Offline SteveGoodz

  • Posts: 561
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: help!
« Reply #1 on: January 02, 2008, 21:32:58 »
How exactly did you remove the EGR?

Might not even be related but I guess it is  :(
Regards

Steve G
"Paddy" a 1996 3.9 V8 ES Auto Discovery
A re-imported Japanese model running on LPG

Offline paul.p

  • Posts: 143
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: help!
« Reply #2 on: January 03, 2008, 16:50:47 »
i fitted a blanking plate and new top hose.... but tried putting the valve back on this eve to check if prob still there. it is, so its now back to standard but lose power at 2250rpm now.  :'( 

Offline J13 MUD

  • Posts: 28
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: help!
« Reply #3 on: January 03, 2008, 17:42:35 »
Have you checked the turbo hoses? I had one come off once which resulted in a similar loss of power, also check the short 90degree turbo hose, I have known these to split on the bend.

Good luck.

Jim
Offroad toy 1994 Disco 300 TDI, 2" Lift,       BFG Muds, Scorpion Winch bumpers, EPi 9 winch, Scorpion steering and Diff guards, Scorpion Rock and Tree sliders.

Offline The Fat Controller

  • Posts: 271
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: help!
« Reply #4 on: January 03, 2008, 22:04:57 »
i fitted a blanking plate and new top hose.... but tried putting the valve back on this eve to check if prob still there. it is, so its now back to standard but lose power at 2250rpm now.  :'( 
sounds like a lose of fuel or fuel restiction.check the trap in the fuel line just in front of the osr wheel.
BRIAN                                                              1987 Range Rover 6cyl turbo 5dr 5 speed(diesel)diesel.1988 Range Rover 3.5V8 vogue se(duck)lpg. car trailer(s c ruffy).  http://members.mud-club.com/profiles/The%20Fat%20Controller/gallery/duck  http://members.mud-club.com/profiles/The%20Fat%20Controller/gallery/diesel/0/264830-1121727056.
http://i18.photobucket.com/albums/b127/2406/RANGE%20ROVER/DSC00079.jpg

Offline SteveGoodz

  • Posts: 561
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: help!
« Reply #5 on: January 03, 2008, 22:50:03 »
To my mind the fact that the top intercooler hose expands when you accelerate then there is a partial blockage in the air system somewhere after the end of the top hose ~ from the air flow meter onwards. It sounds like the turbo is boosting the pressure but it can't all get into the engine so it's causing the hose to expand. Is that possible?

Have you removed the AFM and the hose that goes to the inlet manifold and checked it's clear?
Regards

Steve G
"Paddy" a 1996 3.9 V8 ES Auto Discovery
A re-imported Japanese model running on LPG

Offline stageonesimmo

  • Posts: 310
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Y'Arte Et Me Arte'ies
  • Referrals: 0
Re: help!
« Reply #6 on: January 04, 2008, 00:47:45 »
Air flow meter, 300 TDi?

How did you remove the EGR - it has electrical and vacuum connections which can screw with things if not dealt with at the time its removed.  Or did you just blank it off and if so, where - at the top hose or at the base of the valve (the best place for a number of reasons). Was everything OK before you removed the EGR?

The reason for me removing my EGR was a flat-spot at 2250 rpm same as yours - thats the point at which the EGR opens, boost drops as a result, flat-spot, simply put.  You arent going to get much boost stood still, if any with a worn turbo so any symptoms you get revving it on the drive outside are not going to be the same as when its actually pulling.  Best bet is to pull the hoses off as suggested and check for splits/delamination (more likely as splits will result in a clear whistling noise), if its all ok, bang it back together making sure the joints are all correctly sealed and try going for a drive to see what its like.

I can give you some ideas for dealing with the vac and electrical side of things later.........

Good luck with it
Son, life has a habit of kicking you in the ass and i only have vague recollections of when it wasn't kickin mine!

Offline Guyh2

  • Posts: 16
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: help!
« Reply #7 on: January 04, 2008, 11:53:10 »
removed the egr on my 300tdi yesterday, now i've lost power, wont rev over 3000rpm, thought may be dodgy top hose but when checked it just now when rev it out of gear it chucks out black then white smoke and the top hose from intercooler expands? any ideas please??

Is the white smoke really acrid - it burns nose & eyes?
If so then check your fuel filters, white smoke like that is usually down to injection timing - most commonly caused by fuel starvation.


Offline paul.p

  • Posts: 143
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: help!
« Reply #8 on: January 04, 2008, 17:11:36 »
its even worse to day, its all back to original, so guess was just sods law that happened at same time as removing the valve, when gets to 2250 rpm its like all power drops off, wont go at all, under that rpm it drives as normal though?? gonna check hoses and fuel filter 2moro, after that i'm clueless on diesels. it fuels just like run out of fuel but it aint, drop the rpm and its ok.....

Offline karlo

  • Posts: 848
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • TATA The New Green Oval!
    • Swadlincote, South Derbyshire
  • Referrals: 0
Re: help!
« Reply #9 on: January 04, 2008, 17:50:19 »
Silly question time, what's the air filter like?

Check for
collapsed turbo hose
blocked intercooler

I had a similar thing on mine turned out to be the air filter although it didn't look that bad!

Offline paul.p

  • Posts: 143
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: help!
« Reply #10 on: January 04, 2008, 19:43:40 »
i'll add hoses to check list....  :?

Offline SteveGoodz

  • Posts: 561
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: help!
« Reply #11 on: January 04, 2008, 21:43:50 »
Air flow meter, 300 TDi?

Oh yes, both of the 300Tdi's I've owned have had them.
Regards

Steve G
"Paddy" a 1996 3.9 V8 ES Auto Discovery
A re-imported Japanese model running on LPG

Offline stageonesimmo

  • Posts: 310
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Y'Arte Et Me Arte'ies
  • Referrals: 0
Re: help!
« Reply #12 on: January 04, 2008, 22:00:57 »
Not seen one of them before on any 300 TDi I've ever seen, still you never stop learning apparently.............
Son, life has a habit of kicking you in the ass and i only have vague recollections of when it wasn't kickin mine!

Guardian.

  • Guest
Re: help!
« Reply #13 on: January 04, 2008, 22:15:33 »
AIR FLOW meter?

Offline bilge rat

  • Posts: 726
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: help!
« Reply #14 on: January 04, 2008, 22:46:37 »
probably were auto 's.  might be worth considering you lift pump . iff you have recently fitted one and it was britpart still check it . .alan.....

Offline paul.p

  • Posts: 143
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: help!
« Reply #15 on: January 05, 2008, 14:48:48 »
ok so today, checked all the hoses, changed the fuel filter, changed the fuel lift pump and still no go....  its like the govener kicks in at 2250 as it holds back at same rpm every time... i really lost for ideas now.  :?

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: help!
« Reply #16 on: January 05, 2008, 16:48:43 »
removed the egr on my 300tdi yesterday, now i've lost power, wont rev over 3000rpm, thought may be dodgy top hose but when checked it just now when rev it out of gear it chucks out black then white smoke and the top hose from intercooler expands? any ideas please??

Is the white smoke really acrid - it burns nose & eyes?
If so then check your fuel filters, white smoke like that is usually down to injection timing - most commonly caused by fuel starvation.



Mine does exaclty that when is seems to have clogged a fuel filter.  I'm going through a record number of them at the moment too :evil:
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline stageonesimmo

  • Posts: 310
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Y'Arte Et Me Arte'ies
  • Referrals: 0
Re: help!
« Reply #17 on: January 05, 2008, 18:16:26 »
Any other symptoms like bad starting or stalling at lights etc?

Just seems odd that it shold start doing this as a result of taking the EGR off  :roll: - mind you, it IS a land rover   ;)...........
Son, life has a habit of kicking you in the ass and i only have vague recollections of when it wasn't kickin mine!

Offline paul.p

  • Posts: 143
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: help!
« Reply #18 on: January 05, 2008, 18:30:10 »
think prob just started at same time as taking the egr off as was same when i put it back just to rule it out. car has always started 1st time but now its not, about 4th try before it starts.

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: help!
« Reply #19 on: January 05, 2008, 18:46:17 »
Sounds like a fuel supply problem then.  If you've changed the filter and lift pump you need to look for a blockage or leak somewhere next.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline paul.p

  • Posts: 143
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: help!
« Reply #20 on: January 05, 2008, 19:22:15 »
is there a filter on pick up pipe in tank? can get to it without dropping tank? no leaks, checked that earlier.

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: help!
« Reply #21 on: January 05, 2008, 19:23:32 »
There should be a coarse mesh pickup filter, try blowing back through the fuel line, otherwise it's accesible through the boot floor.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Timbad

  • Guest
Re: help!
« Reply #22 on: January 05, 2008, 19:53:59 »
i had the same problem as you, a new fuel sedementer helped but my main problem was the turbo wastgate actuator arm had snapped (just under the manifold) Not saying it will cure you but worth a look :shock:

Offline Ja1983

  • Posts: 1082
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • This week I have mostly been fixing....
  • Referrals: 0
Re: help!
« Reply #23 on: January 06, 2008, 00:59:12 »
would suspect a blocked fuel line, remove at filter end and blow back with an air line, (take filler cap off first!) try running from a drum of derv by temporarily connecting a feed & return.. if its struggling with starting it could also be a leak along the line (when not running air is getting in, thus lines are empty after its stood overnight)

good luck!

It has been said that, given enough time, a million monkeys bashing at a million typewriters would eventually produce the complete works of Shakespeare. Thanks to the Saxo forums, we now know this to be wrong

No oil leek = No oil left!

Offline The Fat Controller

  • Posts: 271
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: help!
« Reply #24 on: January 06, 2008, 11:57:26 »
ok so today, checked all the hoses, changed the fuel filter, changed the fuel lift pump and still no go....  its like the govener kicks in at 2250 as it holds back at same rpm every time... i really lost for ideas now.  :?

but you still don't say if you've checked the trap infront of the osr wheel.this gunks up and resticts fuel flow especialy if it's never been looked at in 175000 miles.al you need is a 11mm ring spanner.this is simpler to check than trying to check the tank pick-up
BRIAN                                                              1987 Range Rover 6cyl turbo 5dr 5 speed(diesel)diesel.1988 Range Rover 3.5V8 vogue se(duck)lpg. car trailer(s c ruffy).  http://members.mud-club.com/profiles/The%20Fat%20Controller/gallery/duck  http://members.mud-club.com/profiles/The%20Fat%20Controller/gallery/diesel/0/264830-1121727056.
http://i18.photobucket.com/albums/b127/2406/RANGE%20ROVER/DSC00079.jpg

Offline paul.p

  • Posts: 143
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: help!
« Reply #25 on: January 06, 2008, 19:37:13 »
didnt know there is a trap there??   well i got it running today, the pick up in tank was clogged, but i'll check that trap as well. thanks everybody for the help.....

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal