Pages: [1]   Go Down

AuthorTopic: Overdrive fitting problem  (Read 1580 times)

0 Members and 1 Guest are viewing this topic.

Offline harryhedgehog

  • Posts: 62
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Overdrive fitting problem
« on: January 17, 2008, 20:02:23 »
Hi, Can anyone help?

Right I have overdrive in place but I have approx. 10mm gap between mating faces.

Fairey instructions recommend starting / flicking starter in first with transfer box in neutral and pulling overdrive lever back. Then it should slide in to place.

But it does not.

Clutch sleeve fitted as per diagram with needle rollers towards transfer box and outer splines towards overdrive.

The mainshaft lock nut appears to be in a smilar position to what it was before stripping it down.

I assume the problem aliging the outer splines on the clutch sleeve with their mating internal splines in the overdrive?

Any suggestions? - Have I fitted something wrong?
Logged
1983 SWB 2.25 Petrol S3 Truck Cab

Leaf-Sprung Land-Rover Forum    Land Rover S3C Forum

Offline TBM

  • Posts: 179
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Overdrive fitting problem
« Reply #1 on: January 17, 2008, 20:07:00 »
Have you trimmed down the lugs on the lock nut washer?
Logged

Offline Devon-Rover

  • Posts: 748
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Tavistock
  • Referrals: 0
Re: Overdrive fitting problem
« Reply #2 on: January 17, 2008, 21:03:31 »
Ditto TBM. Sounds like that is your hindrence.
Logged
Rowan.

"Jemima" 2.25 Petrol SWB, ACR rear Silencer, 235/85 Macho's, MAP Capstan & HD Bumper, Tweeked suspension, CB, Light Bar.
"Baker" 2.6 Petrol LWB (former Tow Truck)
"Lizi" 4.2 V8i Discovery, Gone but not forgotten.
"Kate" 1985 Ninety 4.2 V8 Auto, Stainless exhaust, Ashcroft Tunnel, Mud console, Polmar Venus CB, HD Steering bars, Terrafirma Steering damper, D44 Winch Bumper, Superwinch EP9.5, Superwinch Wireless controls, QT Diff Guards. 'More toys to come'


Vorsprung Duch Ducktape. My website Searle Safari Info source.

Offline harryhedgehog

  • Posts: 62
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Overdrive fitting problem
« Reply #3 on: January 17, 2008, 22:15:45 »
Hi Spot on TBM, now all back together and luckily 99% sure there's no spare nuts & bolts kicking around  :lol:
Logged
1983 SWB 2.25 Petrol S3 Truck Cab

Leaf-Sprung Land-Rover Forum    Land Rover S3C Forum
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal