Pages: [1]   Go Down

AuthorTopic: removing viscous fan  (Read 2528 times)

0 Members and 3 Guests are viewing this topic.

Offline saintsboy

  • Posts: 42
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
removing viscous fan
« on: February 07, 2008, 19:30:38 »
hi is there a cheaper way of removing the fan and replacing it with a electric one other than using a kenlowe or pacet one
i have heard a peugeot one fits with a switch but i want a automatic one so no switching as il prob forget
oh its for a 3.5 v8
thanks
Rob
Logged

Offline Evilgoat

  • Posts: 2786
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: removing viscous fan
« Reply #1 on: February 07, 2008, 19:47:49 »
B4 Audi A/C assist fan would fit easy enough I think (Audi 80/90/100) Main fan may be a bit too deep.

Will check silverlake next time I'm there.
Logged
I must confess the the activities of the UK governments for the past couple of years have been watched with frank admiration and amazement by Lord Vetinari. Outright theft as a policy had never occured to him.

-- (Terry Pratchett, alt.fan.pratchett)

EX HK Police Mitsubishi Pajero 2.8TD
Audi S2 Avant 360bhp
Transit LWB 2.5di (The Shed)

Offline hairyasswelder

  • Posts: 1351
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • It's gonna cost ya
  • Referrals: 0
Re: removing viscous fan
« Reply #2 on: February 07, 2008, 20:25:51 »
Quote from: saintsboy on February 07, 2008, 19:30:38
hi is there a cheaper way of removing the fan and replacing it with a electric one other than using a kenlowe or pacet one
i have heard a peugeot one fits with a switch but i want a automatic one so no switching as il prob forget
oh its for a 3.5 v8
thanks
Rob


Use the thermo switch and stat housing from the aircon model,  find a fan at the breakers and fabricate mounts  :D wire using relay  ;)
Logged
'88 RR 3.5 efi, an on going project :o) evolving daily/slowly

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: removing viscous fan
« Reply #3 on: February 08, 2008, 02:49:33 »
Cheapest way is, leave it alone.  Electric fans won't shift as much air abd don't save any fuel, certaily bnot enough to pay for themselves.
Logged
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline Skibum346

  • Posts: 1975
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • T. A. N. S. T. A. A. F. L.
  • Referrals: 0
Re: removing viscous fan
« Reply #4 on: February 08, 2008, 08:14:21 »
I'm nearly finished doing miune now. I've used a pair of air con fans from a scrap 1984 RRC along with the excellent X-Eng fan switch housing. I'm wiring each fan through a relay with a three position switch to control the fans (one position is automatic) and will have LED tell tales to see the state.

There are wiring diagrams on the X-Eng site that are pretty good and provide a niumber of different options.

Good luuck

Skibum

Logged

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: removing viscous fan
« Reply #5 on: February 08, 2008, 17:05:51 »
Quote from: Skibum346 on February 08, 2008, 08:14:21


There are wiring diagrams on the X-Eng site that are pretty good and provide a niumber of different options.


There are :-.  I'll have to look.
Logged
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline Ja1983

  • Posts: 1082
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • This week I have mostly been fixing....
  • Referrals: 0
Re: removing viscous fan
« Reply #6 on: February 08, 2008, 18:20:57 »
there is a cheaper way.....
dont bother...!

if it works well, leave it alone! :D :lol:

http://www.mud-club.com/forum/index.php/topic,55942.0.html
Logged

It has been said that, given enough time, a million monkeys bashing at a million typewriters would eventually produce the complete works of Shakespeare. Thanks to the Saxo forums, we now know this to be wrong

No oil leek = No oil left!

Offline Skibum346

  • Posts: 1975
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • T. A. N. S. T. A. A. F. L.
  • Referrals: 0
Re: removing viscous fan
« Reply #7 on: February 08, 2008, 18:35:00 »
Quote from: Range Rover Blues on February 08, 2008, 17:05:51
Quote from: Skibum346 on February 08, 2008, 08:14:21


There are wiring diagrams on the X-Eng site that are pretty good and provide a niumber of different options.


There are :-.  I'll have to look.

Go to the fan switch on their website and click on fitting instructions on the top right

Skibum
Logged

Offline hairyasswelder

  • Posts: 1351
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • It's gonna cost ya
  • Referrals: 0
Re: removing viscous fan
« Reply #8 on: February 08, 2008, 19:24:43 »
Quote from: Ja1983 on February 08, 2008, 18:20:57
if it works well, leave it alone! :D :lol:

It doesn't  :? :? :?
Logged
'88 RR 3.5 efi, an on going project :o) evolving daily/slowly

Offline lee celtic

  • Regional Rep
  • *
  • Posts: 2680
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: removing viscous fan
« Reply #9 on: February 08, 2008, 23:25:10 »
I did mine with a mondeo fan but it is a bit tight so I'm relpacing it with a vectra one on a switch ..

how can you forget to switch it on if the light on the dash is glowing :?
Logged
so many hills , so little time ....
discovery TD5
work in progress...lol

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: removing viscous fan
« Reply #10 on: February 08, 2008, 23:32:35 »
Quote from: Skibum346 on February 08, 2008, 18:35:00
Quote from: Range Rover Blues on February 08, 2008, 17:05:51
Quote from: Skibum346 on February 08, 2008, 08:14:21


There are wiring diagrams on the X-Eng site that are pretty good and provide a niumber of different options.


There are :-.  I'll have to look.

Go to the fan switch on their website and click on fitting instructions on the top right

Skibum

Looks like they have changed them since we spoke the other day ;)


Useful bit of kit their switch too.
Logged
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline Skibum346

  • Posts: 1975
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • T. A. N. S. T. A. A. F. L.
  • Referrals: 0
Re: removing viscous fan
« Reply #11 on: February 09, 2008, 01:13:22 »
Quote from: Range Rover Blues on February 08, 2008, 23:32:35
Quote from: Skibum346 on February 08, 2008, 18:35:00
Quote from: Range Rover Blues on February 08, 2008, 17:05:51
Quote from: Skibum346 on February 08, 2008, 08:14:21


There are wiring diagrams on the X-Eng site that are pretty good and provide a niumber of different options.


There are :-.  I'll have to look.

Go to the fan switch on their website and click on fitting instructions on the top right

Skibum

Looks like they have changed them since we spoke the other day ;)


Useful bit of kit their switch too.
Ye I emailed them and spoke to Si (?) who kindly gave me a drawing of the internals of the switch so I could better understand the process and he also decided it was time to update the diagrams.

I've been impressed with their helpfulness and the quality of the fan switch housing.

Skibum
Logged

Offline TDi90

  • Posts: 2712
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Rolly - Under Construction...
  • Referrals: 0
Re: removing viscous fan
« Reply #12 on: February 09, 2008, 07:32:54 »
yup his name is Si.
he is on here but more so on LR4x4.
R
Logged
TDi90
~The DFYTR Moderation Team~

Offline hrox

  • Posts: 118
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: removing viscous fan
« Reply #13 on: February 10, 2008, 18:32:09 »
well i not long replaced the viscous on my 300 tdi.  again one off a pug wired to a switch,  you can get the thermo kits on eblag for about £20 delivered.   

with me 300tdi i have not had to flick the fan on once at all and so far done bout 2000 miles including being stuck in stationary traffic for well over an hour along with some 400 mile motorway trips.  ive noticed a slight saving of 4 - 6 mpg around town and the constant starting and stopping the engine.   motorway i get about the same but notice a lot easier to over take without having to drop it a gear.

if its any help i found some v8 disco kenlowe fans (dual) for also around £20
Logged
Jamie, Shell & the Ankle Biters
--------------------------------------------------
1998 Disco 1
How much fun do you Have in yours???

Dont Steal, The Goverment Hates Competition!

Offline wizard

  • Posts: 1095
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Cardiff. In the land of our fathers, so i am told
  • Referrals: 0
Re: removing viscous fan
« Reply #14 on: February 10, 2008, 18:47:13 »
I have a few thermostats in my e bay shop, and diagrams on the web site.

http://stores.ebay.co.uk/Wizardbilt

http://www.wizardbilt.com/

Regards
wizard :twisted:
Logged
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal