Topic: rolling a 90 (Read 3752 times)

trickydicky · « **on:** March 09, 2008, 07:49:32 »

can anybody tell me what is the maximum angles landrover recomend that an early 90 can go to befor rolling. as my wife is convinced she is going to die every time we go over a small tuft of grass or pebble. thanks richard

diggerdog36 · « **Reply #1 on:** March 09, 2008, 08:27:10 »

Ive always been led to believe its 38degrees. Thats what the angle is at all the land rover dealers test route on site.

Guardian. · « **Reply #2 on:** March 09, 2008, 08:50:25 »

YOU CAN DEFINATELY GO OVER A LUMP IN THE ROAD, OR SOME PEBLES. :D
YOU WILL SOon find out where that angle is should you try hard enough

SteveG · « **Reply #3 on:** March 09, 2008, 09:19:31 »

Quote from: trickydicky on March 09, 2008, 07:49:32

can anybody tell me what is the maximum angles landrover recomend that an early 90 can go to befor rolling. as my wife is convinced she is going to die every time we go over a small tuft of grass or pebble. thanks richard

Just explain that the butt clenching she does over every bump is great for toning of the derrier and would take her 30 minutes in the gym to get the equivalent! ;) ;) ;)

adafish · « **Reply #4 on:** March 09, 2008, 09:19:45 »

bring ya mota long to where i teach..... www.forest4wd.co.uk she can have ago and learn the nice way.....only at jct 11 M42

TDi90 · « **Reply #5 on:** March 09, 2008, 09:24:59 »

er... :oops:
quite a lot i think :oops: :oops:

crazymac · « **Reply #6 on:** March 09, 2008, 11:33:45 »

Having had (as will have many on here) my various landy's at severe angles I would say that you will bottle out long before the landy goes over!!

Its not so much the angle either! you can drive a nice level angle and be not concerned, but the same angle with undulations and perhaps a bit of speed will take you over. I've rolled my trialer a few times and each time its not been the angle on its own, its been the lump in addition that has overbalanced me!

Range Rover Blues · « **Reply #7 on:** March 09, 2008, 19:49:07 »

And sliding sideways before coming to an abrupt halt.

I had the same problem, so I bought a land meter. Seeing it going into the red on every roundabout hasn't helped the cause though :-.

extreme90 · « **Reply #8 on:** March 09, 2008, 21:14:08 »

i dont take notice of what angle
it goes into itse side to graze as and when it see's fit :oops:
but when you cant stay on your seat is a good pointer you aint going much further before it topples :lol:

Muddy · « **Reply #9 on:** March 12, 2008, 20:18:22 »

What he says^^^^^^^^^^^^^^^^^

When you can feel yourself slipping out of the seat you are resonaly close, also you feel the topside getting very 'light'.

graham2306 · « **Reply #10 on:** March 12, 2008, 22:14:54 »

Not sure what it is for a 90, but I can tell you what it is for a series III

hairyasswelder · « **Reply #11 on:** March 13, 2008, 18:57:58 »

Quote from: graham2306 on March 12, 2008, 22:14:54

Not sure what it is for a 90, but I can tell you what it is for a series III

Was that a V8???? Alergic to water????? :lol: :lol: :lol:

Thought it was 45 degree but taken down to 38 for safety, steering uphill transfers weight too fast and will take you over too :shock: :shock:

graham2306 · « **Reply #12 on:** March 13, 2008, 22:17:28 »

Quote from: hairyasswelder on March 13, 2008, 18:57:58

Was that a V8???? Alergic to water????? :lol: :lol: :lol:

No it was a 2.25 Diesel! It was a trials section at Woolfox Quarry in an RTV trial. To miss the gate I had to put the drivers side wheels onto the bank and the ruts on the passenger side just pushed me further up the bank than I wanted to go. I think it was at 44.3 degrees when it went over :lol: :lol:

trickydicky · « **Reply #13 on:** March 14, 2008, 18:33:39 »

seeing that pic i think i would loos my bottle befor she went over

Muddy · « **Reply #14 on:** March 15, 2008, 20:00:20 »

Just remembered i have this pic when i was trying to roll my 90, the back wheel is just off the floor and i couldnt push it over, i ended up making a little ramp out of two breeze blocks and driving up it pretty fast to get it to go.

even then it went over extremly slowly.

Will

trickydicky · « **Reply #15 on:** March 15, 2008, 21:04:22 »

you are one crazzy mo fo

graham2306 · « **Reply #16 on:** March 15, 2008, 21:15:41 »

Quote from: Muddy on March 15, 2008, 20:00:20

Just remembered i have this pic when i was trying to roll my 90,
Will

Will I have to ask, WHY?

Graham

Range Rover Blues · « **Reply #17 on:** March 15, 2008, 22:59:59 »

Quote from: graham2306 on March 15, 2008, 21:15:41

Quote from: Muddy on March 15, 2008, 20:00:20
Just remembered i have this pic when i was trying to roll my 90,
Will

Will I have to ask, WHY?

Graham

Ditto :-k

trickydicky · « **Reply #18 on:** March 15, 2008, 23:30:19 »

i would never try to roll my little girl over i have had her about 11 months and i have spent 10 month fixing her she brakes an axle if i fart on her seats i wouldnt dear roll her

crazymac · « **Reply #19 on:** March 15, 2008, 23:34:37 »

I will confess to putting my 90 (V8 trialer) on its side on purpose!! It was easier to weld the chassis that way!!

Rasbo · « **Reply #20 on:** March 16, 2008, 09:45:08 »

unfortunatly cant find the pics, but i stuck my 90 on it back side last year. gf wont get in the car with me now

Saffy · « **Reply #21 on:** March 16, 2008, 10:24:03 »

Quote from: Rasbo on March 16, 2008, 09:45:08

i stuck my 90 on it back side last year. gf wont get in the car with me now

Great Tip ! :dance:

Muddy · « **Reply #22 on:** March 21, 2008, 15:40:39 »

I was doing it to see how far it took before it actualy went, i wanted to see how much it would take so that i knew in future when I was getting near the limit, i had the digger there with the strap to catch it so i did'nt mangle the bodywork.

Personaly i feel every offroad driver should know when their motor is going to go over its a useful thing to know, just like knowing how long it takes you to stop from 30mph or how wide your car is.

Will.

trickydicky · « **Reply #23 on:** March 21, 2008, 16:16:42 »

a good point well made can i borrow yer JCB

Rasbo · « **Reply #24 on:** March 21, 2008, 22:18:15 »

Quote

Great Tip ! :dance:

Get more pics now :lol:

Range Rover Blues · « **Reply #25 on:** March 22, 2008, 04:15:21 »

True that we should all know our limits, not sure I fancy trying that withou the JCB though.

I think I'll let cowardice sustain as my safeguard for now.

Muddy · « **Reply #26 on:** March 22, 2008, 19:09:10 »

Yes i wouldn't really want to try it without the digger, i have plonked it on its side since and i knew exactly what was happening, do my cage design the bodywork was fine but i still wouldnt try it purposefuly.
Will.

Mareng · « **Reply #27 on:** March 22, 2008, 19:47:58 »

Will, its worth remembering that once you have some shocks on, the amount of lean you get before you roll will reduce....

This is as far as I could safely take my 110 before I felt it was dangerous, the rear anti-roll bar was still on at the time though, and any further than this saw the back right wheel come off the ground.

Dave K · « **Reply #28 on:** March 22, 2008, 20:00:55 »

I know someone who has!

It's not big & it's not clever.
Don't let your Missus see this. [-X

Range Rover Blues · « **Reply #29 on:** March 23, 2008, 03:43:45 »

My sister's looked worse than that :-o

got to over 40 degrees on a 1 in 4 or worse hill before it went. Still scares me to think.

News:

AuthorTopic: rolling a 90 (Read 3752 times)

Guardian.