AuthorTopic: Please Help, BF Goodrich Tyers?????!!!!!!  (Read 819 times)

0 Members and 2 Guests are viewing this topic.

Offline bobtailed disco

  • Posts: 452
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Please Help, BF Goodrich Tyers?????!!!!!!
« on: March 18, 2008, 20:11:20 »
I have got a 1994 v8 disco with a 2inch lift, anyone no the best tyre size to put on it?? (well what will fit with no chopping). Also anyone know what kind of milage you get out of the bf goodrich ATs and the bf goodrich MTs, I can't decide which ones to go for, Cheers rob

Offline auf_wiedersehen_pet

  • Posts: 1179
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Please Help, BF Goodrich Tyers?????!!!!!!
« Reply #1 on: March 18, 2008, 20:27:33 »
Also anyone know what kind of milage you get out of the bf goodrich ATs and the bf goodrich MTs

Lots.

I've had my 235/85s on my RRC 2003-2007, switched them to my Disco 2007-2008 and plan to move them to my Series 1 soon. They've done 25k at least with no signs of wear. I will put BFG ATs on the Disco to replace them. Only reason for swap is changing from 16" Modulars to 17" Alloys.

Rob Steele

1995 Land Rover Discovery 300 TDi - Everyday Car (Ex Jap)
2007 Toyota Avensis 2.2 T-180 - Sensible Car (Ex TSB Bank)

Offline clover

  • Posts: 550
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Clover
  • Referrals: 0
Re: Please Help, BF Goodrich Tyers?????!!!!!!
« Reply #2 on: March 18, 2008, 20:37:16 »
I beg to differ...

235/85 R 16 will require at least a camel chop on the rear arches.

I would go for a full chop to be on the safe side if you do anything more arduous than normal road use with 235/85. Also if you are using defender type modulars you should do a complete chop as I am led to believe that the wheel offset is different for Defender wheels and leads to rubbing (read cutting) of your tyres on the arch's with 235/85's on a Disco or Rangie

BFG muds should give you good mileage. Not as much as AT's  - just depends how much work you do in the brown stuff...

« Last Edit: March 18, 2008, 20:41:24 by discopinky »
1996 Discovery 300TDi Affectionately known as Clover. 
Cooper Discover STT 33/12.50/R15, a 2" body lift off chassis. H/D springs with 50mm platform spacers on the rear. Nothing on the front as they foul the shocks :-) 11" travel rough country shocks and mountings with dislocating spring cones,  adjusted wheel arches, safari snorkel. H/D rear bumper, demountable drop plate,. H/D steering guard, QT diff guards.
tree sliders, Split charge running twin Optima's, spotlight bar with 4 whoppers on it, H/D winch bumper, 12,000lbs winch,  A bar with 2 50w mini spotlights, brownchurch full length roof rack. 2 work lights.CB,
Fine English engineering modified to work!

Offline auf_wiedersehen_pet

  • Posts: 1179
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Please Help, BF Goodrich Tyers?????!!!!!!
« Reply #3 on: March 18, 2008, 20:40:58 »
Sorry all for the confusion - forgot to say that my Disco has 4" lift. Very tiny rub when flexing.
Rob Steele

1995 Land Rover Discovery 300 TDi - Everyday Car (Ex Jap)
2007 Toyota Avensis 2.2 T-180 - Sensible Car (Ex TSB Bank)

Offline clbarclay

  • Posts: 1615
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Please Help, BF Goodrich Tyers?????!!!!!!
« Reply #4 on: March 18, 2008, 20:54:52 »
I would recomend fitting a minimum 32" high tyres (eg 235/85R16 or 265/75R16 etc) if possible for off roading. These are standard size on most 90s, resulting in a lot of the ruts ending up accordingly deep.

A simple camel cut at the back of the rear aches can be very subtle and still allow enough room for a 235/85.


MT or AT?
That depends what your planning on doing. For greenlaning and pay and plays then AT is perfectly adiquate. Having said that you can end up wanting more, I started on ATs (reatread copy of BFGs), then got some BFG MTs, then I wanted more clearance under the diffs and more 'bite' so moved to SATs (which are a pig on the raod). I now have super swampers, not that I 'need' them, just natural progression.
« Last Edit: March 18, 2008, 21:01:31 by clbarclay »
Chris

Various range rovers from 1986 to 1988 in various states
Locost sports car based on mk2 escort - currently working on brakes, fuel and wiring

Offline bobtailed disco

  • Posts: 452
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Please Help, BF Goodrich Tyers?????!!!!!!
« Reply #5 on: March 18, 2008, 21:03:46 »
I would recomend fitting a minimum 32" high tyres (eg 235/85R16 or 265/75R16 etc) if possible for off roading. These are standard size on most 90s, resulting in a lot of the ruts ending up accordingly deep.

A simple camel cut at the back of the rear aches can be very subtle and still allow enough room for a 235/85.
i would like the bfg muds but am concered about the mileage and am still interested in getting ATs but just don't know enough as yet to make a decision. I am going to be using them for serious off-roading and greenlaning so any advice on that would be a great help, cheers.
« Last Edit: March 18, 2008, 21:05:59 by bobtailed disco »

Offline clover

  • Posts: 550
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Clover
  • Referrals: 0
Re: Please Help, BF Goodrich Tyers?????!!!!!!
« Reply #6 on: March 18, 2008, 22:20:58 »
Hi

I can't see any reason why you would not get upwards of 20K out of BFG MT's. You would probably get a lot more.

I think from what you are saying you should go MT's for sure. If you get AT's you will probably regret it.

You could also consider the Cooper STT's as some rate these as being good in the mud also and hard wearing.
1996 Discovery 300TDi Affectionately known as Clover. 
Cooper Discover STT 33/12.50/R15, a 2" body lift off chassis. H/D springs with 50mm platform spacers on the rear. Nothing on the front as they foul the shocks :-) 11" travel rough country shocks and mountings with dislocating spring cones,  adjusted wheel arches, safari snorkel. H/D rear bumper, demountable drop plate,. H/D steering guard, QT diff guards.
tree sliders, Split charge running twin Optima's, spotlight bar with 4 whoppers on it, H/D winch bumper, 12,000lbs winch,  A bar with 2 50w mini spotlights, brownchurch full length roof rack. 2 work lights.CB,
Fine English engineering modified to work!

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: Please Help, BF Goodrich Tyers?????!!!!!!
« Reply #7 on: March 19, 2008, 01:48:02 »
235/85 will fit a 2" lifted RRC no problems.  On  disco you will need the slightest cut at the back, or to tub the bottom of the arch slightly.  if you don't do it, the tyres will do it for you :lol:

A/T are damn good but given how the hadling will change anyway I'd say why not go for M/T
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline Hightower

  • Moderator
  • ***
  • Posts: 1112
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Please Help, BF Goodrich Tyers?????!!!!!!
« Reply #8 on: March 19, 2008, 13:06:16 »
I run BFG 265/75R16 MTR's on my D2.  They have been fitted now for nearly 3 years and still have plenty of tread left.  The outer edges are a bit scuffed and rounded but that is down to the weight of the car and the way I throw it around corners.  Noise form the MTR's is not intrusive and the handling is not bad at all.

When they wear out I will be swapping them for BFG AT's only because I am changing to 18" rims and they don't do an MTR in that size :(
Simon
1998 Disco Series II Td5 - Not standard
1972 88" Series 3 - The project

Macmillan 4x4 UK Challenge
1st Overall - 2011, 2010, 2009, 2008, 2006, 2005
3rd Overall - 2007

Offline CNorman

  • Posts: 172
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Please Help, BF Goodrich Tyers?????!!!!!!
« Reply #9 on: March 19, 2008, 13:11:19 »
I had my 300tdi Disco on BFGoodrich muds and drove miles on them! They were quiet, smooth and the handling on dry roads was exactly the same as on road tyres.

The only time you would notice the Muds is on very wet, glossy, roads and even then you would know you were going to fast!

I would buy the mud terrains all day long. When my AT2's have finished on my GV i will change to MT's on that and it is my daily driver to work etc.

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal