AuthorTopic: Disco 1 tow bar - can it go ????  (Read 866 times)

0 Members and 2 Guests are viewing this topic.

Offline davidjmiller

  • Posts: 252
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Disco 1 tow bar - can it go ????
« on: April 09, 2008, 20:15:29 »
Can I get rid of the tow bar on my disco 1 to stop it dragging??? Of course, I would still need recovery points - what's the best way?????

Thanks,

David

p.s. i don't tow and don't intend to !!!
1986 110 coniston green LPG-powered 3.5LV8   --- gone, gone, gone. Replaced by 300Tdi auto DISCO

Offline Disco_Stu

  • Posts: 402
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Any chance of a tow...?
  • Referrals: 0
Re: Disco 1 tow bar - can it go ????
« Reply #1 on: April 09, 2008, 20:22:28 »
Yes, remove it. Pretty straight forward, 2 nuts are tricky to reach up inside the rear bumper but not too hard if you take your time. Did mine in 20 mins, that included fitting the JATE rings I bought on eblag as recovery points. Plenty of penetrating oil on towbar bolts is a good thing...

Stu.
1994 300Tdi Disco    


Snorkel now complete.... http://forum.difflock.com/viewtopic.php?t=1906&highlight=



Offline russ3120

  • Posts: 93
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Disco 1 tow bar - can it go ????
« Reply #2 on: April 09, 2008, 20:31:31 »
I have removed mine, replaced it with a 10mm thick plated, which has 3 holes in it
2 are used to bolted it to the rear cross member, where the tow bracket was bolted and the other hole is about 30mm, to fit a shackle to

PM your email if you want pics




Russ

Offline Disco_Stu

  • Posts: 402
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Any chance of a tow...?
  • Referrals: 0
Re: Disco 1 tow bar - can it go ????
« Reply #3 on: April 09, 2008, 21:05:46 »
Any chance you can just post your pics here Russ?
1994 300Tdi Disco    


Snorkel now complete.... http://forum.difflock.com/viewtopic.php?t=1906&highlight=



Offline russ3120

  • Posts: 93
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0

Offline russ3120

  • Posts: 93
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Disco 1 tow bar - can it go ????
« Reply #5 on: April 09, 2008, 21:48:16 »
I can`t seem to post pics, either i IS A FICKY or something

Offline russ3120

  • Posts: 93
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Disco 1 tow bar - can it go ????
« Reply #6 on: April 09, 2008, 21:55:14 »

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: Disco 1 tow bar - can it go ????
« Reply #7 on: April 10, 2008, 00:16:29 »
Just remeber that the towbar has been protecting you fuel tank from damage so far.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline davidjmiller

  • Posts: 252
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Disco 1 tow bar - can it go ????
« Reply #8 on: April 10, 2008, 07:00:07 »
Just remeber that the towbar has been protecting you fuel tank from damage so far.

Yep, good point. Tank gaurd required as well then.

David
1986 110 coniston green LPG-powered 3.5LV8   --- gone, gone, gone. Replaced by 300Tdi auto DISCO

Offline clover

  • Posts: 550
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Clover
  • Referrals: 0
Re: Disco 1 tow bar - can it go ????
« Reply #9 on: April 10, 2008, 16:39:21 »
I fitted a detachable tow mount from Disco parts. That way i kept the tow bar option and they will sell you a shackle mount that you can fit when not using the drop plate.
1996 Discovery 300TDi Affectionately known as Clover. 
Cooper Discover STT 33/12.50/R15, a 2" body lift off chassis. H/D springs with 50mm platform spacers on the rear. Nothing on the front as they foul the shocks :-) 11" travel rough country shocks and mountings with dislocating spring cones,  adjusted wheel arches, safari snorkel. H/D rear bumper, demountable drop plate,. H/D steering guard, QT diff guards.
tree sliders, Split charge running twin Optima's, spotlight bar with 4 whoppers on it, H/D winch bumper, 12,000lbs winch,  A bar with 2 50w mini spotlights, brownchurch full length roof rack. 2 work lights.CB,
Fine English engineering modified to work!

Offline bilge rat

  • Posts: 726
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Disco 1 tow bar - can it go ????
« Reply #10 on: April 10, 2008, 19:54:35 »
yeah i got one of those, o.k and reasnable price..alan...

Offline Chris Putt

  • Posts: 366
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Disco 1 tow bar - can it go ????
« Reply #11 on: April 12, 2008, 18:26:00 »
I have cut the disco towbar down so the drop plate retaining arms JUST clear the tank, this way I have the best of both worlds, the arms still protect the exposed rear edge of the tank, and the drop plate no longer acts as a plough!

Looking at making up a piece of plate to bolt between the two arms and bent up a bit to give marginally better protection too!

Chris
'Its Gripped'
'Its sorted!'
'Lets Offroad!'

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: Disco 1 tow bar - can it go ????
« Reply #12 on: April 12, 2008, 18:42:54 »
I've seen that done on comp trial motors as you get a good strong recovery and tank protection too.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline crazymac

  • Posts: 1891
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Disco 1 tow bar - can it go ????
« Reply #13 on: April 12, 2008, 20:18:14 »
I removed mine and fitted a Guardian tank guard which takes a drop plate as required!

I HAVE THE BODY OF A GOD

shame its Budda!!

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal