too bigger tyre for my wheel carrier

[mentalmoshio sophs V8i]

ive just found my insa special trak 265 wont fit on the wheel carrier  :doh: i was wondering would it be worth making raised nut plate to solve the problem

how ever i do have a wizard jack mount on there and was wondering un doing the nut on it every time the mud tyres go on roughly every 6 weeks . would wear the threads out.

i also plan to weld the jack holder to the carrier. ( the twin nut idea was not on there enough for my liking plus i dont want another claim on the insurance  :doh: )

would it be better to use a 90/110 wheel carrier on the roofrack or disco one .

i did think about a d44 one but  the price puts me off

tell me what u think

david p

[Paul]

If it's just to give you more room from the bottom of the tyre to the bumper... you can remove the carrier, move it up and re-drill it  ;)

[mentalmoshio sophs V8i]

its not in the best state high up on the mounts paul soz forgot to mention that bit

oh what bolt size are they i was thinking theywere about m16

[Paul]

Time to start saving for a D44 one then  :)

[Disco Matt]

My Wizardbilt jack carrier only goes on when I'm out laning, the rest of the time the back part is left on with the wheel cover over the top and the front part is in the boot. It doesn't seem to be damaging the threads so far.

[wheels244]

Cut down both sides with grinder.
Move up to required height - reweld, then plate bottom gap at front and top gap at rear for strength.
I did this to get my Grizzly on the back, worked a treat.
I've got some pictures somewhere if you want them.
What are the Special Traks like on the road ?

[mentalmoshio sophs V8i]

on the road well , funny enough i was chatting to mike from the extreme team early he spun his once on a rounabout.

as for me there quite noisy . roughly radio at 10 with loud function off to not hear them at all. they do judder under braking abit. speed wise 60 ish and over takes some holding.

much improvement over grizzlys. steering lock is a bit of a problem use lose roughly 1/2 a turn on the lock.

mine runs with anti roll bar still on

[meader]

are you sure because imrunning 265/75/16 grizzlys and my spare is an insa turbo on the back door if it does not fit your door then something is very wrong and if you still have problems you may have to lower the the rear bumper very slightly not that i had to

[mentalmoshio sophs V8i]

lower the bumper , wat with different brackets made

[thermidorthelobster]

Moved mine up one hole, ground out the top of the bracket so it didn't clash, and drilled new holes at the bottom.  Worked a treat.  IIRC you can flip them upside down and redrill the centre hole, but can't remember why I didn't do that.

[wheels244]

Found a picture

I had to slot the bottom of it as well to fit the wheel over.

[karlo]

Later (300's) disco's have spacers behind the carrier and 265/75/16 go straight on.

[windowlicker]

Found a picture

I had to slot the bottom of it as well to fit the wheel over.

thats how i did mine but i had to buy a new one first which was £50 as my old one was rotten i then found d4x4 do one allready lifted for the same money :-o

[mentalmoshio sophs V8i]

Later (300's) disco's have spacers behind the carrier and 265/75/16 go straight on.

could see it not touching the back of the door but how does it lift it up ?

[Jake]

I had a D44 one 3 years ago
Nice and strong and bolt's straight on

Foolishly i sold it a while back
I will be buying another though
 :D

[karlo]

Later (300's) disco's have spacers behind the carrier and 265/75/16 go straight on.

could see it not touching the back of the door but how does it lift it up ?

I was told I would have to alter my carrier even with the spacers but its OK, I have had the bumper undone so its bolts are at the bottom of the bolt hole.

[stuvy]

I have 33" x 12.50" sitting on my back door, the only problem i have is.... nothing! it does slam some times!!!

[mentalmoshio sophs V8i]

im going down the higher plate option just wonder what m size in bolts 27 mm nut goes onto. :-k

[insa-disco]

my mate has a 35 inch mud terrain tyre on the back of his disco, i dont know if hes altered the brackets  or not, all i know is that he has to  let the tyre down to fit it on the door but he has an on board  compressor so its not a problem for him