Front fog light switch - Please?

[bambamjj]

Hi

Just purchased original landrover front fog light switch to enable me to wire in front spotlights as the original was a large plastic toggle switch with 3 pins screwed in to dash.

Does anyone know what the wiring is for this switch, it has 5 pins i need to know the following, earth, power in & power out (to spots) it has been wired in previously so that the power in comes from the activation of the main beam.

[mentalmoshio sophs V8i]

id forgot using land rover wiring looms just use a ring wiring kit for a tenner and save future problem.

[bambamjj]

its not the loom im using just want to use the switch so all fits in nicely with the dash

[karlo]

1 will be earth, 1 power in, 1 power out, 1 illumination, 1 unused iirc

[bambamjj]

thanks  :D, But

what number will be earth
what number will be volt in
what number will be volt out
what number will be illumination

[karlo]

I think it works like this

Pin
5 - earth
4 - Power Out
3 - unused
2 - illumination
1 - Power in

BUT I've not tried it yet so you will need to test it.

[SteveGoodz]

I think it works like this

Pin
5 - earth
4 - Power Out
3 - unused
2 - illumination
1 - Power in

BUT I've not tried it yet so you will need to test it.

That's what RAVE says it is ... so it's probably wrong  :dance:

[karlo]

I think it works like this

Pin
5 - earth
4 - Power Out
3 - unused
2 - illumination
1 - Power in

BUT I've not tried it yet so you will need to test it.

I couldn't find it on rave  :doh: I trawled the net and played with my metre  :shock:

That's what RAVE says it is ... so it's probably wrong  :dance:

[SteveGoodz]

I couldn't find it on rave  :doh: I trawled the net and played with my metre  :shock:

Now that's just boasting   :-#

[diggerdog36]

I couldn't find it on rave  :doh: I trawled the net and played with my metre  :shock:

Now that's just boasting   :-#

:clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: