AuthorTopic: Alternator / Batterys and Radiator Help  (Read 1077 times)

0 Members and 1 Guest are viewing this topic.

ben_haynes

  • Guest
Alternator / Batterys and Radiator Help
« on: June 08, 2008, 20:53:21 »
Help Please 

Rangie 3.5 Carb'd V8 Auto


My alternator doesnt seem to be working Properly, when i drive the batterys and cables get hot, Very hot,

is it over charging the batterys???  or is it the batterys are cooked???

and what is the biggest output alternator i can put on ??


and also i think my Radiator cores are blocked causing here to overheat

is a 3.5 Efi or 3.9Efi rad bigger and will they fit to a 3.5 carb

Offline hairyasswelder

  • Posts: 1351
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • It's gonna cost ya
  • Referrals: 0
Re: Alternator / Batterys and Radiator Help
« Reply #1 on: June 15, 2008, 12:02:11 »
I run a 100a alt (off a 300tdi i think) as it only produces power when under load. 2 batteries and no problems. maybe yours thinks it is under load all the time?

The 3.5 efi rad is more efficient as when I put a carb model one on mine it ran hotter  :( I think it is a bit thicker but both will fit in the efi
'88 RR 3.5 efi, an on going project :o) evolving daily/slowly

ben_haynes

  • Guest
Re: Alternator / Batterys and Radiator Help
« Reply #2 on: June 15, 2008, 14:44:01 »
so the EFi one will fit my carb model

Offline hairyasswelder

  • Posts: 1351
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • It's gonna cost ya
  • Referrals: 0
Re: Alternator / Batterys and Radiator Help
« Reply #3 on: June 15, 2008, 22:54:18 »
so the EFi one will fit my carb model

You may lose the plastic cowling but it works the other way round.  I am still running a carb model rad on my efi.
I have also changed the header tank and bottom hose to a later model one to improve flow.
'88 RR 3.5 efi, an on going project :o) evolving daily/slowly

ben_haynes

  • Guest
Re: Alternator / Batterys and Radiator Help
« Reply #4 on: June 15, 2008, 23:00:03 »
i have electric fans in place any way so i dont have the plastic cowling to worry about

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal