Pages: [1]   Go Down

AuthorTopic: TDI INTERCOOLER PIPE SIZE  (Read 1792 times)

0 Members and 1 Guest are viewing this topic.

Offline bambamjj

  • Posts: 362
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
TDI INTERCOOLER PIPE SIZE
« on: August 15, 2008, 07:46:27 »
As above does any one know the O/D of the intercooler pipes, gonna look on ebay see if i can get larger intercooler from another vehicle.

Dont have mine at moment so cant measure

or has anyone used one of these

http://cgi.ebay.co.uk/LAND-ROVER-300-tdi-INTERCOOLER-full-size_W0QQitemZ280255810838QQcmdZViewItem?hash=item280255810838&_trkparms=72%3A1121%7C39%3A1%7C66%3A2%7C65%3A12%7C240%3A1318&_trksid=p3286.c0.m14&timeout=1218783026965&bcsi_scan_CEBC8EEF1B349918=I879xcH/jTNygbMO3PwG4iQAAACq87UG

regards
« Last Edit: August 15, 2008, 07:58:11 by bambamjj »
Logged
P reg 300 tdi Discovery, very slow, sluggish and standard but i am working on it.......

SOLD - Gutted
94 V8 Discovery 200 in Black
2" pro-comp lift
Spots
Diff Guards

Offline Disco-Ron

  • Posts: 1048
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: TDI INTERCOOLER PIPE SIZE
« Reply #1 on: August 15, 2008, 22:44:05 »
Loos identical from what i can see, to the allisport one i have on mine..... damn site cheaper!!
Logged
gone from 200tdi.... to 300tdi... still with loads done to it, in fact, even more than the last truck...LOL!!!

Offline bambamjj

  • Posts: 362
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: TDI INTERCOOLER PIPE SIZE
« Reply #2 on: August 16, 2008, 07:49:21 »
Disco ron, was it easy to fit, did you actually notice a difference, i assume it sits fully in front of exisitng radiator.
Logged
P reg 300 tdi Discovery, very slow, sluggish and standard but i am working on it.......

SOLD - Gutted
94 V8 Discovery 200 in Black
2" pro-comp lift
Spots
Diff Guards

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: TDI INTERCOOLER PIPE SIZE
« Reply #3 on: August 16, 2008, 15:26:06 »
I bought one htat had been made for a Disco and it wouldn't fit the RRC, I had to have it modyfied which took ages.

Did I notice a difference, not really but then I hadn't tweaked the pump (it had already been done) so I was more interested in making less smoke.
Logged
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline Disco-Ron

  • Posts: 1048
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: TDI INTERCOOLER PIPE SIZE
« Reply #4 on: August 16, 2008, 19:07:47 »
Allisprt fitted mine for me, and did the magic on the pump at the same time.... didn't notice the difference immediately, but after driving it for about 50 miles it twigged that it was different..... MUCH more torque, and loads better acceleration...... i've since de-catted it, and done away with the centre silencer, so i'm hoping it'll be even better now......
Logged
gone from 200tdi.... to 300tdi... still with loads done to it, in fact, even more than the last truck...LOL!!!

Offline Disco_Stu

  • Posts: 402
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Any chance of a tow...?
  • Referrals: 0
Re: TDI INTERCOOLER PIPE SIZE
« Reply #5 on: August 17, 2008, 11:24:06 »
Quote from: bambamjj on August 15, 2008, 07:46:27
As above does any one know the O/D of the intercooler pipes


Intercooler pipes in my 1994 300tdi are 60-61.5mm O/D at vairious places along their length and no closer than 50mm to their joints to the intercooler/inlet manifold. These are 14 year old hoses which are a little blown but not bulging too badly. Wall section appears to be about 4-5mm. As close as I can get without removing the hose, the intercooler outlet and inlet manifold/plenum inlet measure 53mm O/D.

That said, I think 60mm silicone hoses should do just fine. Might be a tight fit if they have 5mm walls but a bit of fairy and they'll go :)

Stu.
« Last Edit: August 17, 2008, 11:25:47 by Disco_Stu »
Logged
1994 300Tdi Disco    


Snorkel now complete.... http://forum.difflock.com/viewtopic.php?t=1906&highlight=


Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal