OK, this is getting a tad annoying now. A few weeks before the birthday bash i had to change my steering box as it failed the MOT due to leaking, this was from the usual place, at the bottom where the drop-arm connects. I swapped it out for another box, and all was well, no leaks, steering was better all was fine.
After the Birthday bash, i noticed a considerable amount of steering fluid under the Disco. When i checked it looked to be coming from between the box and where in mounts to the chassis. I swapped the box over for the original, checked all connections, added some stop leak, and this one is now leaking in the same place.
As far as i can see the connectors are all tight, and the pipes are not leaking. there is no fluid in site from the top of the box, but once again, when looked at from underneath, it looks to be leaking from between the box and the chassis, where it is bolted.
Any Suggestions?
Cheers for now,
Andy