Topic: Tonight my exhaust back box fell off....Fixed update...side exit (Read 15646 times)

davidlandy · « **Reply #30 on:** November 07, 2008, 16:19:45 »

can you not see why Mr d ?

wrecker · « **Reply #31 on:** November 07, 2008, 18:50:42 »

i think its the same guy mate,

talking to himself [-X :roll:

davidlandy · « **Reply #32 on:** November 07, 2008, 20:43:05 »

Quote from: wrecker on November 07, 2008, 18:50:42

talking to himself [-X :roll:

oh,

first sign of madness apparently. :roll:

J.D. · « **Reply #33 on:** November 09, 2008, 10:49:38 »

Im assuming as it now says GUEST under his old username that he has been removed?

Range Rover Blues · « **Reply #34 on:** November 09, 2008, 16:44:17 »

Or left, or let his membership lapse.

TBH, I'm beginning to get sick of how bitchy this club has become myself.

Just my opinion I hasten to add, nothing more :roll:

lee celtic · « **Reply #35 on:** November 09, 2008, 17:35:32 »

right then.

back on topic ...

I have heard that a few people have used a tax disc holder as a finisher around the side exit exhaust ..

Two questions .

1 , Has anyone used a steel one and did it react with the ali causing white fur .

2 , Is the hole in the disc holder the same size as the origional pipe or do I need to reduce the pipe size to get it through.

Jeff J J · « **Reply #36 on:** November 09, 2008, 22:16:17 »

This snaps me every time a topic comes up that i could do with answers to people come on and start ranting about nothing :x. Lets get back to the topic :lol:. Jeff

lee celtic · « **Reply #37 on:** November 09, 2008, 22:22:25 »

:off topic: Jeff

:lol: :lol: :lol:

boss · « **Reply #38 on:** November 09, 2008, 23:27:51 »

lee, oxidisation will always occour when you mate up alli with steel. i am using the D44 stainless ring for the finisher with silicone behind it to try to provent it a little but there isnt really a way of stopping it, it will eventually get through.

andrew2986 · « **Reply #39 on:** November 10, 2008, 07:50:13 »

Hi,
Im using an old scorpion racing trim piece mounted on chequer plate, will try and post a pic later tonight. Used a bit of tiger seal and then bolted it through.

Andy

andrew2986 · « **Reply #40 on:** November 19, 2008, 08:26:42 »

Hiya,
A pic of my side exit. sorry it took so long !

wrecker · « **Reply #41 on:** November 19, 2008, 22:14:44 »

Quote from: lee celtic on November 09, 2008, 17:35:32

right then.

back on topic ...

I have heard that a few people have used a tax disc holder as a finisher around the side exit exhaust ..

Two questions .

1 , Has anyone used a steel one and did it react with the ali causing white fur .

2 , Is the hole in the disc holder the same size as the origional pipe or do I need to reduce the pipe size to get it through.

1,for me nothing has happend mate,no loss of silver or shine

2,what i done was use flexi pipe to make the bend where i wanted it and then sleeve a bit of old zorst pipe into flexi so that sticks out the side and looks like a proper pipe,then used heat mastic to cover hole and then chrome ring over the end with no hole showing,but can still move when on tick over and when it gets hot.so no noise and rattel

mine is like this and so are a few mates who at present have had no probs,mines been on for 6 months and off road almost every wk-end.

i hope this makes sense :D

lee celtic · « **Reply #42 on:** November 19, 2008, 22:51:48 »

Cheers Guys...

I'm thinking of turning up a bit of Ali at work to look something like this (excuse the dodgy paint box drawing)

Basically it will be a one piece trim and pipe mounted through the body , bolted from the inside then a flexi pipe attached to the flange on the inside of the trim.
With a jubilee clamp (or similar) Might even get it anodised a nice colour

What do you think ??? Will it work ??? What colour ??? :lol: purple , Black , red , gold , grey , blue , :lol: :lol:

The rear body where the pipe will exit will be covered with brushed stainless before the ring is put in place to tidy the lower body up and match the spats I've put in front of the rear wheels...

boss · « **Reply #43 on:** November 19, 2008, 22:53:44 »

will look good. anodize it hot pink!

lee celtic · « **Reply #44 on:** November 19, 2008, 22:56:14 »

EEERRRRRR NO....

:lol: :lol: :lol:

the choc wrapper purple is cool though :-k

boss · « **Reply #45 on:** November 19, 2008, 22:59:42 »

chock rapper purple? and your saying no to hot pink! :lol:
do it out of stainless and heat the [!Expletive Deleted!] up then you get a nice colourchange

lee celtic · « **Reply #46 on:** November 19, 2008, 23:06:33 »

mmmm goldy blue stainless .... :-k

I like your thinking I used to like the colour of stainless headers on bikes

And I have a full set of rumblers at work to mirror polish them while I sleep :dance:

Might be a bit heavy though and flex the body too much :-k

lee celtic · « **Reply #47 on:** February 20, 2009, 21:26:30 »

Well do you remember this idea ????? :D

Well I turned up a bit of scrap billet at work then Drilled the holes and polished it up last night at home ...

I had to change the design a little as I didn't have a long enough tap to thread the holes from the inside so I drilled them right through and counter drilled them to fit the allen bolts flush. I also added the brushed stainless to tidy the rear quarter up ..

What do you think ??? I'm well chuffed with it :dance: :dance:

ben-dent · « **Reply #48 on:** February 20, 2009, 22:59:13 »

looking good lee

have you got any more spare bits of billit?? i think i need to make mine look a bit better :lol:

lee celtic · « **Reply #49 on:** February 20, 2009, 23:25:11 »

Maybe ;)

it may be the right shape and need the bolt holes and polishing :lol: :lol:

gtomo2 · « **Reply #50 on:** February 22, 2009, 19:29:52 »

Pics of my old side exit just to get back on topic.

And yes the flexi pipe lasted longer than 6 months ;)

http://www.mud-club.com/galleries/gtomo2/080707

lee celtic · « **Reply #51 on:** February 22, 2009, 19:43:02 »

Got a piccie in the daylight today ...

looks better with a bit of soot to colour the inside of the tube

carracarra13 · « **Reply #52 on:** February 22, 2009, 20:03:40 »

pucker job m8 like it might coppy your idia if you dont mind

lee celtic · « **Reply #53 on:** February 22, 2009, 20:32:32 »

Quote

pucker job m8 like it might coppy your idia if you dont mind

Thats what were here for bud ;)

thanks for the comments and feel free to use/copy/improve anything you like.....

the bottom of the wing was mulered thats the only reason I put the stainless sheet over it I the wing had been ok I wouldn't have bothered it's held on with the trim bolts and a pop rivit under the arch trim.

I made up one for the other side too while I was at it... :D

boss · « **Reply #54 on:** February 22, 2009, 20:49:08 »

:shock:

I MUST HAVE ONE!

davidlandy · « **Reply #55 on:** February 22, 2009, 20:59:38 »

that looks really neat - does it vibrate the bodywork at all?

lee celtic · « **Reply #56 on:** February 22, 2009, 21:04:13 »

No vibration of the bodywork that I can tell , did about 40 miles today just sounds quieter :?

and boss you must have what the finisher or the rope climber ??? :lol: :lol:

News:

AuthorTopic: Tonight my exhaust back box fell off....Fixed update...side exit (Read 15646 times)

wrecker

wrecker