Pages: [1]   Go Down

AuthorTopic: No Drive  (Read 997 times)

0 Members and 1 Guest are viewing this topic.

Offline dan3411

  • Posts: 63
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
No Drive
« on: October 29, 2008, 12:41:14 »
Heard a Clunk whilst pulling into my drive... lost drive in all gears, still have drive when diff lock is engaged in high and low...
Is it transferbox??

 :cry: :cry: :cry: :cry: :cry:
Logged
Disco '91 3dr 200Tdi

Offline diggerdog36

  • Posts: 487
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • I fixed my CD auto changer!!!!
  • Referrals: 0
Re: No Drive
« Reply #1 on: October 29, 2008, 12:49:16 »
Probably not, more likely to be a half shaft or diff, if you leave it out of diff lock, select a gear and try to drive away, get someone to look under your motor(from a safe place), if the front drive shaft is spinning, then its something up front thats the problem,  if the rear drive shaft is spinning, its something at the back.  If neither prop is spinning then it could be gearbox, tranny box or even clutch!
Logged
2000 W Discovery Td5 ES

2" lift, Superwinch Epi9.5,  Mantec Snorkel, General Grabber AT2

Avoid employing unlucky people......simply bin half the applications!!!

Offline dan3411

  • Posts: 63
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: No Drive
« Reply #2 on: October 29, 2008, 12:59:59 »
okey dokey front prop is spinning but back is not...

I am pretty sure it wouldn't be clutch or gear box because i can move hwen diff lock is engaged????

So what other checks can i do to narrow it down?

I was having issues with cornering actually going round roundabouts was abit.. it seemed abit inbalenced on power to each wheel..

so does this imply a front diff?

« Last Edit: October 29, 2008, 13:08:07 by dan3411 »
Logged
Disco '91 3dr 200Tdi

Offline Disco Matt

  • Posts: 2666
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Re: No Drive
« Reply #3 on: October 29, 2008, 13:08:54 »
Put the diff lock in, jack a front wheel up, and try to turn it. If it won't move then the broken shaft is on the other side.
Logged
1996 Discovery 300TDI. She's got it where it counts...

Offline ChrisW70

  • Moderator
  • ***
  • Posts: 785
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: No Drive
« Reply #4 on: October 29, 2008, 13:10:54 »
Sounds more like a CV joint will be the culprit - usual tell tale is clicking coming from the wheel on full lock - the clicking one is the duff one, probably won't get that now it's failed though.
Logged
Chris W

West Midlands Region GLASS Rep
GLASS TRO Officer

Offline dan3411

  • Posts: 63
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: No Drive
« Reply #5 on: October 29, 2008, 13:27:41 »
Quote from: ChrisW70 on October 29, 2008, 13:10:54
Sounds more like a CV joint will be the culprit - usual tell tale is clicking coming from the wheel on full lock - the clicking one is the duff one, probably won't get that now it's failed though.

Are there any other tests for a failed CV?
there was a clicking noise about a month ago.
Logged
Disco '91 3dr 200Tdi

Offline dan3411

  • Posts: 63
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: No Drive
« Reply #6 on: October 29, 2008, 13:35:52 »
Ok jacked up front wheel it with it in 1st and diff lock.  and it span freely for about half a turn... aswell as that .. not sure if it is to help the diagnostic but i could turn the front prop by hand by about half a turn aswell...
Logged
Disco '91 3dr 200Tdi

Offline J.D.

  • Posts: 1002
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • ...Pure as Belfast snow...
  • Referrals: 0
Re: No Drive
« Reply #7 on: October 29, 2008, 13:55:42 »
If it is a CV joint then more than likely if has collapsed. I would pull the swivel pin housing apart and have a look, if it isnt the swivel pin housing will need to come off anyway to get the halfshafts and diff out, whicever is broken.
Logged
J.D.
- - - -
'ASBO' - Blue Land Rover Recovery Discovery 200TDiS - LR GRAVEYARD OCCUPANT (RIP).
'Green Giant' - Scammel Crusader - WEEKEND WORK!
'Helga' - 2.0T Volvo V40 - BORING!
'Pheonix' - 1995 3.9 V8 Discovery soon to be converted to TDi. - FINISHED!

www.hampshire4x4response.co.uk
www.berkshire4x4response.co.uk

Offline diggerdog36

  • Posts: 487
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • I fixed my CD auto changer!!!!
  • Referrals: 0
Re: No Drive
« Reply #8 on: October 29, 2008, 16:38:15 »
Quote from: dan3411 on October 29, 2008, 13:35:52
Ok jacked up front wheel it with it in 1st and diff lock.  and it span freely for about half a turn... aswell as that .. not sure if it is to help the diagnostic but i could turn the front prop by hand by about half a turn aswell...
Thats more likely to be backlash in the teeth, because they will be worn, if the CV or halfshaft had gone it would spin forever!!
Logged
2000 W Discovery Td5 ES

2" lift, Superwinch Epi9.5,  Mantec Snorkel, General Grabber AT2

Avoid employing unlucky people......simply bin half the applications!!!

Offline dan3411

  • Posts: 63
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: No Drive
« Reply #9 on: October 29, 2008, 18:18:18 »
so what does ths mean diff??
Logged
Disco '91 3dr 200Tdi

Offline diggerdog36

  • Posts: 487
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • I fixed my CD auto changer!!!!
  • Referrals: 0
Re: No Drive
« Reply #10 on: October 29, 2008, 21:26:33 »
Did you try and spin the other wheel?
Logged
2000 W Discovery Td5 ES

2" lift, Superwinch Epi9.5,  Mantec Snorkel, General Grabber AT2

Avoid employing unlucky people......simply bin half the applications!!!
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal