Topic: daisy 2.0 build (Read 128879 times)

boss · « **Reply #180 on:** June 25, 2009, 20:24:51 »

its going to be wide :lol: probably going to get wheels with little or a negative offset, so its not going to get too much wider and itll protect the portal boxes. then again nothing is set in stone.

turbonutter · « **Reply #181 on:** June 25, 2009, 22:57:16 »

Quote from: boss on June 25, 2009, 20:24:51

its going to be wide :lol: probably going to get wheels with little or a negative offset, so its not going to get too much wider and itll protect the portal boxes. then again nothing is set in stone.

thats the problem with mogs
iv got very little offset with my rims on the volvos and iv managed to keep it as near to landy width :D

a mate has mog axles on a custom build , the axles where cut down and custom shafts made up
gets the width back down but is mega bucks

boss · « **Reply #182 on:** June 26, 2009, 18:35:57 »

yes, and if a shaft brakes hes in trouble.

big with isnt always a bad thing, it spreads the weight a little more. but i wont be able to fit anywhere :(
nevermind ill drive over it :lol: :twisted:

mikiep1986 · « **Reply #183 on:** June 26, 2009, 20:37:01 »

lol thats logicall thinking boss ha ha if in doubt drive over it ha ha . . . wouldnt normal disco steel wheels or alloys work to reduce the offset . .

boss · « **Reply #184 on:** June 26, 2009, 22:19:13 »

they would work yes, but i need stronger wheels than that, with beadlocks. and the mog has 6 studs with a different pcd......may be sorting that out soon though.

either going to go to stazworks or somewhere like BTF, mach5 have a website? i know there is such a thing as a mach6....but the only ones i have seen are 20" and look gay.

mikiep1986 · « **Reply #185 on:** June 26, 2009, 23:14:51 »

oh rite cool cool well was just a suggestion but didnt realise the mog axles wer 6 stud my bad lol . . . i think ill stick to my normal axles for now ha ha seems like alot of work for me and ill prob mess it up ha ha . . but good going dude ur gettin on good with that :clap:

turbonutter · « **Reply #186 on:** June 27, 2009, 00:42:07 »

Quote from: boss on June 26, 2009, 18:35:57

yes, and if a shaft brakes hes in trouble.

big with isnt always a bad thing, it spreads the weight a little more. but i wont be able to fit anywhere :(
nevermind ill drive over it :lol: :twisted:

the extra width will make it less likely to roll too :D
when i put the 10x15 rims with my boggers on the disco axles i had the prob with not fitting anywhere
even blew tyres off the rims trying to fit down a track that any normal landy fits down :doh: bead locks did sort this tho

boss · « **Reply #187 on:** June 27, 2009, 08:40:01 »

yeah, its not going to be used for laining or anything like that, just comp use.

landymadjay · « **Reply #188 on:** June 27, 2009, 12:32:12 »

You sorted any tyres yet?

boss · « **Reply #189 on:** June 27, 2009, 20:24:32 »

not got tyres yet. need to sort things out first...like brakes and pinion conversions.....actually getting the axles under the truck.
rear shouldnt be to difficult as im using the stock landrover set up(but not with the stock arms :lol:)
might get A tyre and A wheel from my prefered stockist just so i can get an idea on size.

boss · « **Reply #190 on:** June 27, 2009, 20:32:48 »

oh and got whats left of the drum brakes off today. lots of mayonaise on the rear so better breathers are definatly needed! no pics(unless you want camera phone pics :->) given it a going over with a wire brush too. tomororw there will be pics of a hopefully 100% clean axle.

turbonutter · « **Reply #191 on:** June 27, 2009, 20:59:06 »

i would get what tyres u are goin to use , so u can build around them

will give u the hight from axle to floor then from that u can work out the hight the body will sit at , are u going coilover or landy setup ?

boss · « **Reply #192 on:** June 28, 2009, 18:08:52 »

dont get me started :roll:

pressure washer wasnt working so could only get it as clean as the wire brush would let me with out scratching stuff too much.

hammer wins all. but axle beats me as weight to strength ratio isnt in my favor. there fore it is not in line. but this matters not as there is no welding being done at the moment! :D

will get round to that eventually :roll:

Little-Green-Machine · « **Reply #193 on:** June 28, 2009, 19:19:28 »

looking good!
didnt realise how much beefier those axles wer compared to the standard lr units!
I likes that rear bumper would look nice on the back of mine :twisted:
keep it up :clap:

boss · « **Reply #194 on:** June 28, 2009, 20:20:04 »

rear is ugly as sin though. thinking of going 4 wheel steer just to get the rear one looking sort of presentable. but thats lots o work and i cant ne be arsed!

rear bumper is a concoction of D44 parts and lots of trial and errors, can make one for you if you want one on the back of your series.

mikiep1986 · « **Reply #195 on:** June 28, 2009, 21:27:53 »

na boss the rear looks nice . . . making me think more about cutting mine up more :-k either pick up or dakar style lol . . . but those mog axles are rather wide aint they good job you aint using it down lanes cuz u wont fit ha ha :doh: 4 wheel steer does sound a very very complicated ha ha

boss · « **Reply #196 on:** June 28, 2009, 21:36:47 »

not sure what this dakar style is but pick ups work well. but there more of an offroad thing as the tank normally resides in the truck bed makeing it usless for anything else. but you could probbily do it to yours in a weekend if you get a shuffle on. all you would need is a length of box and some steel sheet.....pm sent.

landymadjay · « **Reply #197 on:** June 28, 2009, 21:44:51 »

Quote from: mikiep1986 on June 28, 2009, 21:27:53

making me think more about cutting mine up more :-k either pick up

Do it, Pick up it :D

Little-Green-Machine · « **Reply #198 on:** June 28, 2009, 22:31:53 »

sounds like a plan but being a studenty type i have no dosh haha
but il keep it in mind :twisted:

mikiep1986 · « **Reply #199 on:** June 29, 2009, 11:37:25 »

hmmmmmmmm its tempting to . . yea suppose it would only take a weekend to do . . . but ill leave it for now as got an event to do in 2 weeks time and still gota sort the brakes out lol . . . once i made my mind up ill let u guys know and boss ill pop up for a weekend hav ea cutting frenzy ha ha

clbarclay · « **Reply #200 on:** June 29, 2009, 13:44:57 »

Quote from: Little-Green-Machine on June 28, 2009, 22:31:53

sounds like a plan but being a studenty type i have no dosh haha
but il keep it in mind :twisted:

Studnet loan :idea: :twisted:

Little-Green-Machine · « **Reply #201 on:** June 29, 2009, 14:40:42 »

i can only get those for degree's, not back bumpers :( either that or tell them i am intending to study at the Boss school of fabrication? :lol:

boss · « **Reply #202 on:** June 29, 2009, 18:31:04 »

i lolled :lol:

Little-Green-Machine · « **Reply #203 on:** June 29, 2009, 19:22:38 »

:lol:

carracarra13 · « **Reply #204 on:** June 29, 2009, 19:35:19 »

Hey boss good to see you making progress would toyota wheels sort you out

boss · « **Reply #205 on:** June 29, 2009, 19:43:38 »

hi mate, i dont think they will. the toyotas have a tighter stud pattern IIRC. seriously considering geting the hubs machined so i can have landrover wheels fitted.

landymadjay · « **Reply #206 on:** July 07, 2009, 00:44:23 »

An Update Please :)

Little-Green-Machine · « **Reply #207 on:** July 14, 2009, 14:54:50 »

Any updates mate? :D

boss · « **Reply #208 on:** July 14, 2009, 15:40:04 »

got a couple of not very relevant photos, my welder has packed up so debating what to do next.
need a new welder, if i get a TIG then the body will be sold and ill make a buggy type thing but migs are cheaper and alot cheaper to run! :lol:
also chasing people up about prices. you say you want something, they say they got it but they no want to give you the price

what the bloody hell is up with that! what with the economy the way it is i would have thought that businesses would be trying to give me stuff! :roll:
BUT 4 way steer is definatly a possibility.....never intended to go 4 steer but i dont like the......things on the rear axles........mog stuff is the same front and rear, so if i got some steering knuckles and some shafts then its a bolt on job. but the "bits" that take the place of the knuckle on the rear axle are ugly and make it look a bit of an abortion, im not to bothered on how it looks but that does bother me :lol:

Little-Green-Machine · « **Reply #209 on:** July 14, 2009, 20:40:02 »

4 wheels steer sounds awsome!
I got a 130 amp mig for £120 on fleebay, but would you need summat more heavy duty?
Cant remember which site it was though :-k

News:

AuthorTopic: daisy 2.0 build (Read 128879 times)

landymadjay

landymadjay

landymadjay