Pages: [1]   Go Down

AuthorTopic: Mud In Bell Housing  (Read 961 times)

0 Members and 1 Guest are viewing this topic.

Offline benbenukuk

  • Posts: 179
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Mud In Bell Housing
« on: December 18, 2008, 19:56:55 »
Hi, I took the wading plug out of the bell housing on my rrc today only to find it full of mud  :huh: I thought the plug stopped this any ideas of why this happened and how I can get it out, cheers.  Ben
Logged
1989 3.5 v8 range rover classic with 3.9 efi system, 6'' lift, +5'' dampers, dislocation cones all round, 12500ib T-Max winch, steering guard, custom made rock sliders, light pod, custom made side exit exhaust, welded front and rear diff guards, full roof rack, 35/12.50R15 BFG Muds, CB Radio, Twin Batteries, Rear ARB Locker :)

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: Mud In Bell Housing
« Reply #1 on: December 18, 2008, 21:07:27 »
The bellhousing is made "watertight by fitting a plate to the front egge after assembly of the engine and box.  This plate has a rubber seal at the top edge and shouldbe assembled with gasket goo (though I don't recall any instruction to use it on the bellhousing).  Any problems with fitting this plate will result in a leak.

To hose it out, fill the bellhousing through the drian hole using a hosepipe (just a trickle or you'll get soaked) then let it ruin back oout.  You won't get it clean but you'll shift most of it.
Logged
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline benbenukuk

  • Posts: 179
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Mud In Bell Housing
« Reply #2 on: December 20, 2008, 08:17:09 »
Thanks for the reply, Do you think there is any point in me fitting the plug from now on as it lets water in? cheers.  Ben
Logged
1989 3.5 v8 range rover classic with 3.9 efi system, 6'' lift, +5'' dampers, dislocation cones all round, 12500ib T-Max winch, steering guard, custom made rock sliders, light pod, custom made side exit exhaust, welded front and rear diff guards, full roof rack, 35/12.50R15 BFG Muds, CB Radio, Twin Batteries, Rear ARB Locker :)

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: Mud In Bell Housing
« Reply #3 on: December 20, 2008, 14:30:45 »
Yes, it will fill very fast if there is an air leak, the water wil displace the air quickly and flood the clutch.  What you need to do is get the plug out much earlier, every time you wade supposedly, so that the water can't accumulate or dry out.
Logged
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal