AuthorTopic: Disco leaning  (Read 1053 times)

0 Members and 1 Guest are viewing this topic.

Offline JimP

  • Posts: 278
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Disco leaning
« on: January 07, 2009, 09:45:01 »
My Disco has a noticable lean to the drivers side, is this likely to be the springs??

The springs ont eh drivers side seem far more copressed than those on the passenger side, if I get some HD lift springs will this solve teh problem? or is something else that is causing the lena?

Thanks

Jim
Disco 300tdi - for laning
Suzuki Vitara - for playing!!

Offline clbarclay

  • Posts: 1615
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Disco leaning
« Reply #1 on: January 07, 2009, 10:41:38 »
It may be the springs are past there best or it may just be that the weight distrobution in the vehicle is wrong.

What is the history of the springs?

Some aftermarket springs have a reuptation of variable quality which can the springs to sag more noticably over time, So HD springs may remove the lean and then a year or so latter its could be leaning again.
Chris

Various range rovers from 1986 to 1988 in various states
Locost sports car based on mk2 escort - currently working on brakes, fuel and wiring

Offline JimP

  • Posts: 278
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Disco leaning
« Reply #2 on: January 07, 2009, 11:02:44 »
The springs were on it when I bought it but I think they are pretty cheap ones tbh!

I'll invest in some quality ones i think!
Disco 300tdi - for laning
Suzuki Vitara - for playing!!

Offline mobi

  • Posts: 291
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Disco leaning
« Reply #3 on: January 07, 2009, 11:03:53 »
most discos lean to the right, even with hd springs.

Offline peasey

  • Posts: 223
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Disco leaning
« Reply #4 on: January 07, 2009, 18:57:30 »
Its amazing how much my springs sagged they were standard fitted by land rover I assume,fitted some new ones and my god what a difference,no more leaning round corners no more rattling and bouncing I used the +2 HD springs from britpart and fitted them today.Its not until you remove the old ones that you find out how bad things were,I thought that they had sent me +4 springs when i measured them side by side :shock:
HIT IT AND HIT IT HARD

wrecker

  • Guest
Re: Disco leaning
« Reply #5 on: January 07, 2009, 19:03:35 »
mine sits spot on,no lean at all

id try new springs,sure that will sort it

or whats the body mounts like,might be rusty and sagging

Offline eugene

  • Posts: 815
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Disco leaning
« Reply #6 on: January 07, 2009, 19:40:12 »
i have brit part 2" springs and gas shocks by brit part and put poly bush kit on well pleased with them and ride is good to and cornering is good no body roll and works well of road so id get new shocks and springs dont have to be a lift standard will lift it to were it sould sit  :D
sj410 wifes offroader
1992 gold 5 door disco winch and bumper spots rooflights .2inch lift. khuno kl 71 265.75.16.rebel steering guard. snorkel
 freelander wifes car
www.norfolk4x4response.org.uk  www.brecklandlrc.co.uk/

Offline Chris Putt

  • Posts: 366
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Disco leaning
« Reply #7 on: January 07, 2009, 19:54:23 »
Get Your lean on!

They all do, no landrover is perfect.

Chris
'Its Gripped'
'Its sorted!'
'Lets Offroad!'

Offline Chris C

  • Posts: 58
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Disco leaning
« Reply #8 on: January 07, 2009, 23:16:41 »
New springs!!!!!

They are not that dear and will transform the ride

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal