Pages: [1]   Go Down

AuthorTopic: Freestyele alloys  (Read 2022 times)

0 Members and 1 Guest are viewing this topic.

Offline andyhubbard

  • Posts: 788
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Freestyele alloys
« on: January 11, 2009, 18:49:30 »
Quick question guys n gals will freestyle alloys fit straight onto a 110 [-o<,it's an E plate so has drums on the rear and the normal front end or would i need spacers,cheers Andy.
Logged

Offline solihull-mick

  • Posts: 986
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Freestyele alloys
« Reply #1 on: January 11, 2009, 18:54:37 »
Hi yes they will fit, but the center caps wont cus the halfshaft sticks out that little to far, its the grease cap on the end that sticks out,
Logged
300 TDI Commercial Disco, ( Recovery & Parts Hack )
Series 2A Hybrid TDI( Bessie)
Mk1 escort RS2000 (my baby)
MK6 Fiesta Zetec s (wife gets the brand new car)

Offline andyhubbard

  • Posts: 788
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Freestyele alloys
« Reply #2 on: January 11, 2009, 18:58:06 »
Thanks-so if i bought the spacers would they let me fit the centre caps then. :dance:
Logged

Offline topless matt

  • Posts: 503
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Freestyele alloys
« Reply #3 on: January 12, 2009, 05:54:40 »
There is the problem that they are not rated to take the weight of a 110.
They were designed for the disco and got used on 90s but the 110 is too heavy for them. :'(
Logged
300tdi, southdown snorkle, tubular bumper, tds winch with dyneema, tree sliders, 6 spotlights, creepy crawler tyres, 2" lift, dislocation cones, dropped mounts all round, wide angle propshafts, mud dash, bucket seats

Likes to eat badgers

Offline andyhubbard

  • Posts: 788
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Freestyele alloys
« Reply #4 on: January 12, 2009, 07:43:45 »
Thanks Topless - must admit to not thinking about that :doh:,what about the Boosts or XS's.  [-o<.
Logged

Offline topless matt

  • Posts: 503
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Freestyele alloys
« Reply #5 on: January 12, 2009, 11:42:43 »
Boosts are fine, my dads 110 has them on it. Not sure about XS's you would need to check that, cant remember off the top of my head.
Hope you find some that fit
Logged
300tdi, southdown snorkle, tubular bumper, tds winch with dyneema, tree sliders, 6 spotlights, creepy crawler tyres, 2" lift, dislocation cones, dropped mounts all round, wide angle propshafts, mud dash, bucket seats

Likes to eat badgers

Offline Bush Tucker Man

  • Posts: 9161
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Freestyele alloys
« Reply #6 on: January 12, 2009, 20:11:19 »
Quote from: topless matt on January 12, 2009, 11:42:43
Boosts are fine, my dads 110 has them on it. Not sure about XS's you would need to check that, cant remember off the top of my head.
Hope you find some that fit

Yes 'Boost' are okay on a 110, as are 'XS' style.



My 110 has 'XS' as a standard fitment (click on pic to enlarge)



If 'push comes to shove' with regard to an insurance claim after a RTC, & you're at fault, you can bet a 'pound to a penny' that the wrongly rated alloys (if you fit 'FreeStyles') will be found out, & there will be a claim that the vehicle was not road-worthy at the time of the incident
Logged
Richard A Thackeray 
Defender 110Td5 'Heritage Gone, but not forgotten
Jaguar XKR; X88 JLT, also 'gone, but not forgotten'

Yorkshire Born & Bred, and proud of it.

"You Can Allus Tell A Yorkshireman, But You Can't tell Him Owt!"

Offline solihull-mick

  • Posts: 986
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Freestyele alloys
« Reply #7 on: January 12, 2009, 20:51:13 »
Ive used freestyle alloys on a 110 with no problems, it ran for nearly 5 years towing my rally car around, would be interesting to find the weights of a disco compered with a 110, but hey everyone to there own,  :grin:
Logged
300 TDI Commercial Disco, ( Recovery & Parts Hack )
Series 2A Hybrid TDI( Bessie)
Mk1 escort RS2000 (my baby)
MK6 Fiesta Zetec s (wife gets the brand new car)

Offline topless matt

  • Posts: 503
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Freestyele alloys
« Reply #8 on: January 13, 2009, 08:56:17 »
I wasnt saying you cant use them, they will take the weight even though they are not rated for it.
However, i dont want blame lying at my door if someone has an accident and the insurers find out about the under rated wheels because i said they could.
Logged
300tdi, southdown snorkle, tubular bumper, tds winch with dyneema, tree sliders, 6 spotlights, creepy crawler tyres, 2" lift, dislocation cones, dropped mounts all round, wide angle propshafts, mud dash, bucket seats

Likes to eat badgers

Offline andyhubbard

  • Posts: 788
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Freestyele alloys
« Reply #9 on: January 13, 2009, 15:22:18 »
Thanks guys - Boosts now in my possesion waiting to be fitted,i asked the guy and he said they could be fitted but without spacers the wheel nuts are not fully on :shock: and could work loose?. Bush Tucker have you got yours fitted without spacers or not (not holding you to anything so don't panic,cheers guys Andy.
Logged

Offline topless matt

  • Posts: 503
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Freestyele alloys
« Reply #10 on: January 13, 2009, 15:49:36 »
My dads have no spacers on them as standard from land rover!!!! so hope they arnt loose :? :-.
What age is your defender?  You may still need the spacers to clear the hubs, bearing in mind that boosts have a fair bit more offset then freestyles do
Logged
300tdi, southdown snorkle, tubular bumper, tds winch with dyneema, tree sliders, 6 spotlights, creepy crawler tyres, 2" lift, dislocation cones, dropped mounts all round, wide angle propshafts, mud dash, bucket seats

Likes to eat badgers

Offline topless matt

  • Posts: 503
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Freestyele alloys
« Reply #11 on: January 13, 2009, 15:57:01 »
Sorry, my internet cut off and sent only half the message.
As there is more off set you may need wider arches when used with spacers.
I know that my dads boosts have a similar offset to my freestyles on spacers  :?
Logged
300tdi, southdown snorkle, tubular bumper, tds winch with dyneema, tree sliders, 6 spotlights, creepy crawler tyres, 2" lift, dislocation cones, dropped mounts all round, wide angle propshafts, mud dash, bucket seats

Likes to eat badgers

Offline Bush Tucker Man

  • Posts: 9161
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Freestyele alloys
« Reply #12 on: January 13, 2009, 16:32:02 »
Quote from: andyhubbard on January 13, 2009, 15:22:18
Bush Tucker have you got yours fitted without spacers or not

No, no spacers.

Although they'd help to gain a few feet off a 110s 'super-tanker' turning circle
Logged
Richard A Thackeray 
Defender 110Td5 'Heritage Gone, but not forgotten
Jaguar XKR; X88 JLT, also 'gone, but not forgotten'

Yorkshire Born & Bred, and proud of it.

"You Can Allus Tell A Yorkshireman, But You Can't tell Him Owt!"

Offline andyhubbard

  • Posts: 788
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Freestyele alloys
« Reply #13 on: January 13, 2009, 19:30:02 »
Thanks for that - think i'll give it ago.
Logged

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: Freestyele alloys
« Reply #14 on: January 14, 2009, 00:39:03 »
BTM, isn't yours a 300?

Andy, I'm pretty sure you can't fit standard alloys to a 200 Defender as th ehubs are differnet, it's only slight but without modification the alloys don't sit properly against the flange.  Cherck the ends of the studs, if they have a triangle or slot stamped in them they are for use with alloys, if not then allosy don't fit.

I've heard you can grind a tiny bit off the inside of the wheels, I've heard you can remove the spring washers from under the bolts holding the drive memebers in place, I've never tried either.

If you need any axle parts let me know, somewhere I've got a whole load of bits with new bearings in them.
Logged
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline topless matt

  • Posts: 503
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Freestyele alloys
« Reply #15 on: January 14, 2009, 08:48:31 »
Or you could just use wheel spacers to get them to fit properly!
It would also gain you a bit more steering lock which is never a bad thing  [-o<
Logged
300tdi, southdown snorkle, tubular bumper, tds winch with dyneema, tree sliders, 6 spotlights, creepy crawler tyres, 2" lift, dislocation cones, dropped mounts all round, wide angle propshafts, mud dash, bucket seats

Likes to eat badgers

Offline Bush Tucker Man

  • Posts: 9161
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Freestyele alloys
« Reply #16 on: January 14, 2009, 23:39:41 »
Quote from: Range Rover Blues on January 14, 2009, 00:39:03
BTM, isn't yours a 300?

No Andy,sadly not

The 'Heritages' are Td5's (so no playing with bio-diesel (<errs on the side of caution>)

Neither's the 'Coventry Cat', that's a supercharged V8 :thumbup: :thumbup:
Logged
Richard A Thackeray 
Defender 110Td5 'Heritage Gone, but not forgotten
Jaguar XKR; X88 JLT, also 'gone, but not forgotten'

Yorkshire Born & Bred, and proud of it.

"You Can Allus Tell A Yorkshireman, But You Can't tell Him Owt!"

Offline andyhubbard

  • Posts: 788
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Freestyele alloys
« Reply #17 on: January 16, 2009, 22:21:09 »
Took the plunge and bought some spacers so hopefully on Monday i should be able to get spacers and wheels fitted.
Logged
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal