Been playing today

[wizard]

http://uk.youtube.com/watch?v=MlUz6YXJZdI

http://uk.youtube.com/watch?v=6ODuVlITo3A

http://uk.youtube.com/watch?v=Txp1tjPqgBA


hopefully the links will work

wizard

[Llanigraham]

Wizard, what off road centre was that, looks good?

[wizard]

Hi
Its not a center,more of a top secret hidy hole place just outside Caerphilly.
If you fancy going up there one day give me a shout.
 
wizard

[robert francis]

i know where it is, its a very good place. some really steep banks tho at the back,

[Disco Matt]

That's a coincidence, I use exactly the same method for carrying my waffle boards and I hadn't seen yours when I was figuring it out!

Bought a spare set of crossbars for my roof rails on ebay, drilled them, fitted some M8 eyebolts, and use these http://cgi.ebay.co.uk/Plant-Trailer-etc-Flat-pin-snap-ring-chain-R0546_W0QQitemZ270303330752QQcmdZViewItemQQptZUK_Trailers_Transporters_Parts?hash=item270303330752&_trksid=p3286.c0.m14&_trkparms=72%3A1301|66%3A2|65%3A12|39%3A1|240%3A1318 to hold the boards on with an M30 washer under each to help make sure it stays attached. Works very well so far. They rattle a bit but there's no way they will come off as four of those clips would need to be dislodged on each board, which could only happen with sustained negative G!

[robert francis]

how do you add a picture on here, it wont paste and copy, so i saved pic, but dont no how to get it on here, help

[wizard]

HI
My waffle boards are held on with cable ties, and before anyone recons cable ties are not strong enough, these ones are almost 20mm wide and a meter long. Industrial strenght.

To put pictures on the forum you need to host them somewhere online. The MC gallery is a good place to start.
There was a link to picture hosting a few years ago, dunno if its still about.

Basiclly load your pic to the MC gallery.
Once you have done that right click on the picture and select "properties"
In the box that pops up copy the link for the address.

Now when you want to post the picture on the forum click "insert image" from the selection of icons at the top menu.
then paste your piccie address inbetween [url and [/url]

Regards
wizard

[shane p]

good videos m8

[Disco Matt]

Here's what I did:



The waffle board goes where my two fingers are, and is held on by the large washer and pin. There are four of these arrangements for each board (two on the front bar and two on the rear, so four per bar in total).

I wish I'd thought of cable ties as drilling aluminium roof bars accurately without a drill press was an interesting process!

Edit, the bolt isn't bent, it's a camera distortion thing.

[robert francis]

hi all i went there today, my truck is stinking, got flooded in the water run up the top, forgot my door rubber had come off, hehe wizard i done the bits right at the end the up and over bits, very good day, i still cant upload pics, <edit> computor